Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32231 August 2004 © EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Metallized polyester film capacitors (MKT) B32231 General purpose (wound) Typical applications Smoothing Filtering Dimensional drawing Climatic Max. operating temperature: 100 °C Climatic category (IEC 60068-1): 40/100/21 Construction Dielectric: polyethylene terephthalate (polyester, PET) Flat winding Insulating sleeve Face ends sealed with epoxy resin Dimensions in mm Width wmax Lead diameter d1 ≤6.0 0.6 >6.0 ... 13.0 0.8 When bending leads take care to leave a clearance of 1 mm to the capacitor body. Terminals Central axial wire leads, lead-free tinned Marking Manufacturer, series number, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded) Delivery mode Bulk (untaped) 2 B32231 General purpose (wound) Overview of available types Type B32231 VR (VDC) 100 250 400 630 Vrms (VAC) 63 160 200 200 CR (µF) 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 3 B32231 General purpose (wound) Ordering codes and packing units VR Vrms CR f ≤60 Hz VDC VAC µF 0.15 100 63 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 0.10 250 160 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 Max. dimensions w×h×l mm 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 15.0 × 27.0 10.0 × 18.0 × 32.0 10.0 × 20.0 × 32.0 13.0 × 23.0 × 32.0 5.5 × 8.5 × 14.0 5.5 × 8.5 × 14.0 5.5 × 9.0 × 19.0 5.5 × 9.0 × 19.0 6.0 × 12.0 × 19.0 7.5 × 12.0 × 19.0 7.5 × 12.0 × 27.0 8.5 × 14.0 × 27.0 8.5 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 20.0 × 32.0 Ordering code (composition see below) B32231D1154+000 B32231D1224+000 B32231D1334+000 B32231D1474+000 B32231D1684+000 B32231D1105+000 B32231D1155+000 B32231D1225+000 B32231D1335+000 B32231D1475+000 B32231D1685+000 B32231D1106+000 B32231D3104+000 B32231D3154+000 B32231D3224+000 B32231D3334+000 B32231D3474+000 B32231D3684+000 B32231D3105+000 B32231D3155+000 B32231D3225+000 B32231D3335+000 B32231D3475+000 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% (on request) 4 Untaped pcs./unit 1500 1500 1500 1500 1500 1000 1000 1000 1000 500 500 250 1500 1500 1500 1500 1000 1000 1000 1000 500 500 250 B32231 General purpose (wound) Ordering codes and packing units VR Vrms CR f ≤60 Hz VDC VAC µF 0.10 400 200 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 0.10 630 200 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions w×h×l mm 5.5 × 8.5 × 19.0 5.5 × 9.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 19.0 7.0 × 12.0 × 27.0 8.0 × 14.0 × 27.0 9.0 × 16.0 × 27.0 10.0 × 18.0 × 32.0 13.0 × 22.0 × 32.0 6.0 × 11.0 × 19.0 7.5 × 12.0 × 19.0 8.0 × 13.0 × 19.0 8.0 × 13.0 × 27.0 8.0 × 14.0 × 27.0 10.0 × 16.0 × 32.0 13.0 × 18.0 × 32.0 Ordering code (composition see below) B32231D6104+000 B32231D6154+000 B32231D6224+000 B32231D6334+000 B32231D6474+000 B32231D6684+000 B32231D6105+000 B32231D6155+000 B32231D6225+000 B32231D8104+000 B32231D8154+000 B32231D8224+000 B32231D8334+000 B32231D8474+000 B32231D8684+000 B32231D8105+000 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = ±20% K = ±10% J = ±5% (on request) 5 Untaped pcs./unit 1500 1500 1000 1000 1000 1000 500 250 250 1000 1000 1000 1000 500 500 250 B32231 General purpose (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan δ (in 10-3) at 20 °C (upper limit values) Insulation resistance Rins or time constant τ = CR Rins at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f ≤ 60 Hz) Operating voltage V op for short operating periods (VDC or VAC at f ≤ 60 Hz) Damp heat test Limit values after damp heat test at +100 °C +100 °C 40 °C +85 °C 0.10 µF < CR ≤ 1 µF CR > 1 µF VR 100 VDC ≥ 250 VDC 10 25 CR ≤ 0.33 µF 3750 MΩ 7500 MΩ 10 CR > 0.33 µF 1250 s 2500 s 1.4 VR, 2 s TA (°C) TA ≤ 85 85<TA≤100 TA (°C) TA ≤ 100 DC voltage derating VC = VR VC = VR (165TA)/80 DC voltage (max. hours) Vop = 1.25 VC (2000 h) AC voltage derating VC,rms = Vrms VC,rms=Vrms (165TA)/80 AC voltage (max. hours) Vop = 1.0 VC,rms (1000 h) 1 kHz 10 kHz 21 days/40 °C/93% relative humidity Capacitance change ∆C/C Dissipation factor change ∆ tan δ Insulation resistance Rins or time constant τ = CR Rins 6 ≤ 5% ≤ 5 10-3 (at 1 kHz) ≤ 7 10-3 (at 10 kHz) ≥ 20% of minimum as-delivered values B32231 General purpose (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lenght of capacitor VR Vrms VDC VAC 14 mm 100 250 400 630 63 160 200 200 19 mm 27 mm 32 mm 6 10 3 5 7 10 2 3 4 7 1.5 2.5 14 mm 19 mm 27 mm 32 mm k0 in V2/µs 1 200 5 000 600 2 500 5 600 12 500 400 1 500 3 200 8 800 300 1 250 2 400 6 300 dV/dt in V/µs 3 5 k0 values Lenght of capacitor VR Vrms VDC VAC 100 250 400 630 63 160 200 200 7 B32231 General purpose (wound) Impedance Z versus frequency f (typical values) Permissible AC voltage Vrms versus frequency f Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. 8