EPCOS B32686-A474-K

Metallized Polypropylene (MKP/MFP)
Series/Type:
B32682
The following products presented in this data sheet are being withdrawn.
Ordering Code
B32682
B32683
B32684
Substitute Product
Date of
Withdrawal
06.09.2002
06.09.2002
06.09.2002
Deadline Last
Orders
31.10.2002
31.10.2002
31.10.2002
Last Shipments
31.03.2003
31.03.2003
31.03.2003
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Metallized Polypropylene Film Capacitors (MFP)
B 32 682
in Plastic Case
… B 32 686
Wound MFP pulse capacitors
with highest possible contact reliability
Construction
■ Dielectric: polypropylene
■ Film metallized on one side and
metal foils internally connected in series
■ Plastic case (UL 94 V-0)
■ Epoxy resin sealing
Features
■ Very high pulse strength
■ Highest possible contact reliability
■ Self-healing properties
Dimensions in mm
Typical applications
■ Pulse circuits with steep voltage rise rates
■ High-frequency ac loads
■ Snubbering of power semiconductors
Lead spacing
± 0,4
Diameter d1
Type
15,0
0,8
B 32 682
22,5
0,8
B 32 683
27,5
0,8
B 32 684
37,5
1,0
B 32 686
Terminals
■ Parallel wire leads, tinned
■ Also available with (3,2 ± 0,3) mm lead length
Marking
Manufacturer’s logo,
lot number
style (MFP),
rated capacitance (coded),
capacitance tolerance (code letter),
rated dc voltage,
date of manufacture (coded)
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reels)
For notes on taping, refer to chapter “Taping and packing”, page 274.
179 12/00
MFP
B 32 682 …
B 32 686
Overview of available types
15 mm
Type
B 32 682
B 32 683
Page
0,10 nF
0,15 nF
0,22 nF
0,33 nF
0,47 nF
0,68 nF
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
0,10 µF
0,15 µF
181
182
Lead
spacing
27,5 mm
37,5 mm
Type
B 32 684
B 32 686
Page
15 nF
22 nF
33 nF
47 nF
68 nF
0,10 µF
0,15 µF
183
184
180 12/00
2000 Vdc
500 Vac
2000 Vdc
500 Vac
1600 Vdc
450 Vac
1250 Vdc
450 Vac
1600 Vdc
450 Vac
1250 Vdc
450 Vac
1000 Vdc
400 Vac
2000 Vdc
500 Vac
1600 Vdc
450 Vac
1250 Vdc
450 Vac
1000 Vdc
400 Vac
630 Vdc
300 Vac
1000 Vdc
400 Vac
1600 Vdc
450 Vac
1250 Vdc
450 Vac
1000 Vdc
400 Vac
630 Vdc
300 Vac
630 Vdc
300 Vac
0,22 µF
0,33 µF
0,47 µF
22,5 mm
2000 Vdc
500 Vac
Lead
spacing
B 32 682
MFP
15
Ordering codes and packing units, lead spacing 15 mm
VR
(Vrms,
f ≤ 1 kHz)
CR
630 Vdc
(300 Vac)
4,7 nF
6,8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
15 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
0,10 nF
0,15 nF
0,22 nF
0,33 nF
0,47 nF
0,68 nF
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
1000 Vdc
(400 Vac)
1250 Vdc
(450 Vac)
1600 Vdc
(450 Vac)
2000 Vdc
(500 Vac)
Maximum
dimensions
b × h × l (mm)
Ordering code1)
Packing units (pcs)
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
6,0 × 11,0 × 18,0
7,0 × 12,5 × 18,0
8,5 × 14,5 × 18,0
9,0 × 17,5 × 18,0
5,0 × 10,5 × 18,0
6,0 × 11,0 × 18,0
7,0 × 12,5 × 18,0
8,5 × 14,5 × 18,0
9,0 × 17,5 × 18,0
5,0 × 10,5 × 18,0
6,0 × 11,0 × 18,0
7,0 × 12,5 × 18,0
8,5 × 14,5 × 18,0
9,0 × 17,5 × 18,0
5,0 × 10,5 × 18,0
6,0 × 11,0 × 18,0
7,0 × 12,5 × 18,0
8,5 × 14,5 × 18,0
9,0 × 17,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
5,0 × 10,5 × 18,0
6,0 × 11,0 × 18,0
7,0 × 12,5 × 18,0
8,5 × 14,5 × 18,0
9,0 × 17,5 × 18,0
B32682-A6472-+***
B32682-A6682-+***
B32682-A6103-+***
B32682-A6153-+***
B32682-A6223-+***
B32682-A6333-+***
B32682-A6473-+***
B32682-A332-+***
B32682-A472-+***
B32682-A682-+***
B32682-A103-+***
B32682-A153-+***
B32682-A7222-+***
B32682-A7332-+***
B32682-A7472-+***
B32682-A7682-+***
B32682-A7103-+***
B32682-A1152-+***
B32682-A1222-+***
B32682-A1332-+***
B32682-A1472-+***
B32682-A1682-+***
B32682-A2101-+***
B32682-A2151-+***
B32682-A2221-+***
B32682-A2331-+***
B32682-A2471-+***
B32682-A2681-+***
B32682-A2102-+***
B32682-A2152-+***
B32682-A2222-+***
B32682-A2332-+***
B32682-A2472-+***
Ammo
pack
1170
1170
1170
960
830
680
640
1170
960
830
680
640
1170
960
830
680
640
1170
960
830
680
640
1170
1170
1170
1170
1170
1170
1170
960
830
680
640
Reel
Untaped
1300
1300
1300
1100
900
700
700
1300
1100
900
700
700
1300
1100
900
700
700
1300
1100
900
700
700
1300
1300
1300
1300
1300
1300
1300
1100
900
700
700
1000
1000
1000
1000
1000
500
500
1000
1000
1000
500
500
1000
1000
1000
500
500
1000
1000
1000
500
500
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request)
1) + Code letter for capacitance tolerance
*** Code number for packing: Ammo pack = 289, reel = 189
The ordering code for untaped components ends after the tolerance code letter.
For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32682-A6472-K3
181 12/00
MFP
B 32 683
22,5
Ordering codes and packing units, lead spacing 22,5 mm
VR
(Vrms,
f ≤ 1 kHz)
CR
630 Vdc
(300 Vac)
33 nF
47 nF
68 nF
0,10 µF
0,15 µF
10 nF
15 nF
22 nF
33 nF
47 nF
10 nF
15 nF
22 nF
33 nF
6,8 nF
10 nF
15 nF
22 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
15 nF
1000 Vdc
(400 Vac)
1250 Vdc
(450 Vac)
1600 Vdc
(450 Vac)
2000 Vdc
(500 Vac)
Maximum
dimensions
b × h × l (mm)
Ordering code1)
Packing units (pcs)
6,0 × 15,0 × 26,5
7,0 × 16,0 × 26,5
8,5 × 16,5 × 26,5
10,5 × 16,5 × 26,5
11,0 × 20,5 × 26,5
6,0 × 15,0 × 26,5
6,0 × 15,0 × 26,5
7,0 × 16,0 × 26,5
8,5 × 16,5 × 26,5
10,5 × 18,5 × 26,5
6,0 × 15,0 × 26,5
7,0 × 16,0 × 26,5
8,5 × 16,5 × 26,5
10,5 × 18,5 × 26,5
6,0 × 15,0 × 26,5
7,0 × 16,0 × 26,5
8,5 × 16,5 × 26,5
10,5 × 18,5 × 26,5
6,0 × 15,0 × 26,5
6,0 × 15,0 × 26,5
7,0 × 16,0 × 26,5
8,5 × 16,5 × 26,5
10,5 × 16,5 × 26,5
11,0 × 20,5 × 26,5
B32683-A6333-+***
B32683-A6473-+***
B32683-A6683-+***
B32683-A6104-+***
B32683-A6154-+***
B32683-A103-+***
B32683-A153-+***
B32683-A223-+***
B32683-A333-+***
B32683-A473-+***
B32683-A7103-+***
B32683-A7153-+***
B32683-A7223-+***
B32683-A7333-+***
B32683-A1682-+***
B32683-A1103-+***
B32683-A1153-+***
B32683-A1223-+***
B32683-A2222-+***
B32683-A2332-+***
B32683-A2472-+***
B32683-A2682-+***
B32683-A2103-+***
B32683-A2153-+***
Ammo
pack
680
580
480
390
370
680
680
580
480
390
680
580
480
390
680
580
480
390
680
680
580
480
390
370
Reel
Untaped
700
600
500
400
350
700
700
600
500
400
700
600
500
400
700
600
500
400
700
700
600
500
400
350
720
630
510
540
510
720
720
630
510
540
720
630
510
540
720
630
510
540
720
720
630
510
540
510
Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request)
1) + Code letter for capacitance tolerance
*** Code number for the packing: Ammo pack = 289, reel = 189
The ordering code for untaped components ends after the tolerance code letter.
For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32683-A6154-K3
182 12/00
B 32 684
MFP
27,5
Ordering codes and packing units, lead spacing 27,5 mm
CR
VR
(Vrms,
f ≤ 1 kHz)
Maximum
dimensions
b × h × l (mm)
Ordering code1)
Packing units (pcs)
630 Vdc 0,15 µF
(300 Vac) 0,22 µF
0,33 µF
0,47 µF
1000 Vdc 68 nF
(400 Vac) 0,10 µF
0,15 µF
1250 Vdc 47 nF
(450 Vac) 68 nF
0,10 µF
0,15 µF
1600 Vdc 33 nF
(450 Vac) 47 nF
68 nF
0,10 µF
2000 Vdc 15 nF
(500 Vac) 22 nF
33 nF
47 nF
11,0 × 21,0 × 31,5
12,5 × 21,5 × 31,5
15,0 × 24,5 × 31,5
18,0 × 27,5 × 31,5
11,0 × 21,0 × 31,5
12,5 × 21,5 × 31,5
18,0 × 27,5 × 31,5
11,0 × 21,0 × 31,5
13,5 × 23,0 × 31,5
15,0 × 24,5 × 31,5
19,0 × 30,0 × 31,5
11,0 × 21,0 × 31,5
12,5 × 21,5 × 31,5
15,0 × 24,5 × 31,5
19,0 × 30,0 × 31,5
11,0 × 21,0 × 31,5
11,0 × 21,0 × 31,5
14,0 × 24,5 × 31,5
18,0 × 27,5 × 31,5
B32684-A6154-+***
B32684-A6224-+***
B32684-A6334-+
B32684-A6474-+
B32684-A683-+***
B32684-A104-+***
B32684-A154-+
B32684-A7473-+***
B32684-A7683-+***
B32684-A7104-+
B32684-A7154-+
B32684-A1333-+***
B32684-A1473-+***
B32684-A1683-+
B32684-A1104-+
B32684-A2153-+***
B32684-A2223-+***
B32684-A2333-+
B32684-A2473-+
Ammo
pack
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Reel
Untaped
350
300
–
–
350
300
–
350
250
–
–
350
300
–
–
350
350
–
–
320
280
240
200
320
280
200
320
260
240
180
320
280
240
180
320
320
260
200
Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request)
1) + Code letter for capacitance tolerance
*** Code number for packing: Reel = 189
The ordering code for untaped components ends after the tolerance code letter.
For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32684-A6154-K3
183 12/00
MFP
B 32 686
37,5
Ordering codes and packing units, lead spacing 37,5 mm
CR
VR
(Vrms
f < 60 kHz)
1000 Vdc 0,10 µF
(400 Vac) 0,15 µF
0,22 µF
0,33 µF
0,47 µF
1250 Vdc 0,68 nF
(450 Vac) 0,10 µF
0,15 µF
0,22 µF
0,33 µF
1600 Vdc 0,47 nF
(450 Vac) 0,68 nF
0,10 µF
0,15 µF
2000 Vdc 0,22 nF
(500 Vac) 0,33 nF
0,47 nF
0,68 nF
0,10 µF
Maximum
dimensions
b × h × l (mm)
12,0 × 22,0 × 41,5
14,0 × 25,0 × 41,5
16,0 × 28,5 × 41,5
20,0 × 39,5 × 41,5
20,0 × 39,5 × 41,5
12,0 × 22,0 × 41,5
14,0 × 25,0 × 41,5
16,0 × 28,5 × 41,5
18,0 × 32,5 × 41,5
20,0 × 39,5 × 41,5
12,0 × 22,0 × 41,5
14,0 × 25,0 × 41,5
18,0 × 32,5 × 41,5
20,0 × 39,5 × 41,5
12,0 × 22,0 × 41,5
14,0 × 25,0 × 41,5
16,0 × 28,5 × 41,5
18,0 × 32,5 × 41,5
20,0 × 39,5 × 41,5
Ordering code1)
Packing units (pcs)
B32686-A104-+
B32686-A154-+
B32686-A224-+
B32686-A334-+
B32686-A474-+
B32686-A7683-+
B32686-A7104-+
B32686-A7154-+
B32686-A7224-+
B32686-A7334-+
B32686-A1473-+
B32686-A1683-+
B32686-A1104-+
B32686-A1154-+
B32686-A2223-+
B32686-A2333-+
B32686-A2473-+
B32686-A2683-+
B32686-A2104-+
Untaped
72
56
48
32
32
72
56
48
48
32
72
56
48
32
72
56
48
48
32
Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J, ± 5 %
1) +
Code letter for capacitance tolerance
For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32686-A104-K3
184 12/00
B 32 682
MFP
… B 32 686
Technical data
Climatic category
in accordance with IEC 60068-1
55/100/56
Lower category temperature Tmin
Upper category temperature Tmax
− 55 °C
+ 100 °C
Damp heat test
56 days/40 °C/93 % relative humidity
Limit values after damp
heat test
Capacitance change |∆C/C|
≤2%
Dissipation factor change ∆ tan δ ≤ 1,0 ⋅ 10−3 (at 10 kHz)
Insulation resistance Ris
≥ 50 % of minimum
or time constant τ = C R ⋅ Ris
as-delivered values
Reliability:
Reference conditions
Failure rate
0,5 ⋅ V R; 40 °C
1 ⋅ 10−9/h = 1 fit
For a conversion table for other operating conditions and temperatures, refer to chapter “Quality assurance”, page 327.
Service life
Failure criteria:
Total failure
Failure due to variation
of parameters
200 000 h
Short circuit or open circuit
Capacitance change |∆C/C|
Dissipation factor tan δ
Insulation resistance Ris
or time constant τ = C R ⋅ Ris
> 10 %
4 ⋅ upper limit values
< 1500 MΩ (CR ≤ 0,33 µF)
< 500 s
(CR > 0,33 µF)
DC test voltage
2,0 ⋅ V R, 2 s
Category voltage VC
Operation with dc voltage or
ac voltage Vrms up to 1 kHz
T ≤ 85 °C: VC = 1,0 ⋅ V R or 1,0 ⋅ V rms
Dissipation factor tan δ (in 10−3)
at 20 °C
(upper limit values)
Insulation resistance R is
or time constant τ = CR ⋅ Ris
at 20 °C, rel. humidity ≤ 65 %
(minimum as-delivered values)
at
1 kHz
10 kHz
100 kHz
CR ≤ 0,33 µF
100 GΩ
C R ≤ 0,1 µF
C R > 0,1 µF
–
0,4
1,0
0,4
0,5
–
C R > 0,33 µF
30 000 s
185 12/00
MFP
B 32 682 …
B 32 686
Impedance Z
versus
frequency f
(typical values)
Pulse handling capability
Maximum permissible voltage change per unit of time for non-sinusoidal voltages
(pulse, sawtooth)
VR
Max. rate of voltage rise V pp/τ in V/µs (for Vpp = V R)
Lead spacing
15 mm
22,5 mm
27,5 mm
37,5 mm
5 000
3 000
2 000
—
1000 Vdc
9 000
5 000
3 800
2 000
1250 Vdc
12 000
7 000
4 500
2 800
1600 Vdc
16 000
11 000
6 000
3 500
2000 Vdc
17 000
15 000
8 000
4 500
630 Vdc
For V pp < V R , the permissible voltage rise rate value V pp/τ may be multiplied by the factor V R/V pp.
Also refer to the calculation example in chapter “General technical information”, page 302.
VR
Pulse characteristic k 0 in V2/µs (for Vpp ≤ V R)
Lead spacing
15 mm
22,5 mm
27,5 mm
2 500 000
37,5 mm
630 Vdc
6 300 000
3 800 000
1000 Vdc
18 000 000
10 000 000
7 500 000
4 000 000
1250 Vdc
30 000 000
17 500 000
11 000 000
7 000 000
1600 Vdc
51 000 000
35 000 000
19 000 000
11 000 000
2000 Vdc
68 000 000
60 000 000
32 000 000
18 000 000
186 12/00
—
B 32 682
MFP
15
Permissible ac voltage V rms versus frequency f
Lead spacing 15 mm
630 Vdc/ 300 Vac
1000 Vdc/ 400 Vac
KMK0725-B
1000
Vac
Vrms 500
Vrms 500
100
100
50
10
10 3
4,7 nF
10 nF
47 nF
10 4
50
10 5
10 6
Hz 10 7
f
1250 Vdc/ 450 Vac
10
10 3
KMK0731-K
Vrms 500
100
100
2,2 nF
10 nF
10 4
10 4
10 5
10 6
Hz 10 7
f
50
10 5
10 6
Hz 10 7
f
KMK0734-A
1000
Vac
Vrms 500
10
10 3
3,3 nF
15 nF
1600 Vdc/ 450 Vac
1000
Vac
50
KMK0728-1
1000
Vac
10
10 3
187 12/00
1,5 nF
6,8 nF
10 4
10 5
10 6
Hz 10 7
f
MFP
15
B 32 682 …
B 32 684
Permissible ac voltage V rms versus frequency f
Lead spacing 15 mm
2000 Vdc/ 500 Vac
KMK0737-Z
1000
Vac
Vrms 500
100
50
10
10 3
0,10 nF
1,0 nF
4,7 nF
10 4
10 5
10 6
Hz 10 7
f
188 12/00
B 32 683
MFP
22,5
Permissible ac voltage V rms versus frequency f
Lead spacing 22,5 mm
630 Vdc/ 300 Vac
1000 Vdc/ 400 Vac
KMK0726-J
1000
Vac
Vrms 500
Vrms 500
100
100
50
10
10 3
50
33 nF
0,15 µF
10 4
10 5
10 6
Hz 10 7
f
1250 Vdc/ 450 Vac
10
10 3
KMK0732-T
Vrms 500
100
100
10 nF
33 nF
10 4
10 4
10 5
10 6
Hz 10 7
f
50
10 5
10 6
Hz 10 7
f
KMK0735-I
1000
Vac
Vrms 500
10
10 3
10 nF
47 nF
1600 Vdc/ 450 Vac
1000
Vac
50
KMK0729-9
1000
Vac
10
10 3
189 12/00
6,8 nF
22 nF
10 4
10 5
10 6
Hz 10 7
f
MFP
B 32 683
22,5
Permissible ac voltage V rms versus frequency f
Lead spacing 22,5 mm
2000 Vdc/ 500 Vac
KMK0738-8
1000
Vac
Vrms 500
100
50
10
10 3
2,2 nF
15 nF
10 4
10 5
10 6
Hz 10 7
f
190 12/00
B 32 684
MFP
27,5
Permissible ac voltage V rms versus frequency f
Lead spacing 27,5 mm
630 Vdc/ 300 Vac
1000 Vdc/ 400 Vac
KMK0724-3
1000
Vac
Vrms 500
Vrms 500
100
100
50
10
10 3
0,15 µF
0,47 µF
10 4
50
10 5
10 6
Hz 10 7
f
1250 Vdc/ 450 Vac
10
10 3
KMK0730-C
Vrms 500
100
100
47 nF
0,15 µF
10 4
10 4
10 5
10 6
Hz 10 7
f
50
10 5
10 6
Hz 10 7
f
KMK0733-2
1000
Vac
Vrms 500
10
10 3
68 nF
0,15 µF
1600 Vdc/ 450 Vac
1000
Vac
50
KMK0727-S
1000
Vac
10
10 3
191 12/00
33 nF
0,10 µF
10 4
10 5
10 6
Hz 10 7
f
MFP
B 32 684
27,5
Permissible ac voltage V rms versus frequency f
Lead spacing 27,5 mm
2000 Vdc/ 500 Vac
KMK0736-R
1000
Vac
Vrms 500
100
50
10
10 3
15 nF
47 nF
10 4
10 5
10 6
Hz 10 7
f
192 12/00
B 32 686
MFP
37,5
Permissible ac voltage V rms versus frequency f
Lead spacing 37,5 mm
1000 Vdc/ 400 Vac
1250 Vdc/ 450 Vac
KMK0657-8
1000
Vac
Vrms
Vrms
500
100
50
10
10 3
0,1 µF
0,22 µF
0,47 µF
10 4
50
10 5
10 6
KMK0659-P
10 4
10 5
10 6
Hz 10 7
f
KMK0660-S
1000
Vac
Vrms
500
500
100
100
10
10 3
10
10 3
Hz 10 7
f
68 nF
0,15 µF
0,33 µF
2000 Vdc/ 500 Vac
1000
Vac
50
500
100
1600 Vdc/ 450 Vac
Vrms
KMK0658-G
1000
Vac
47 nF
0,1 µF
0,15 µF
10 4
50
10 5
10 6
Hz 10 7
f
10
10 3
193 12/00
22 nF
0,1 µF
10 4
10 5
10 6
Hz 10 7
f
B 32 682 …
MFP
B 32 686
Flyback application
Permissible voltage and current / waveform
Permissible current Ipp versus frequency for a duty cycle of 20 % (t0 /t = 0,2):
V0-p
t = 10 ... 63,5 µs
t0
Ipp
KMK0720-5
Approximation formular for duty cycle higher than 20 %:
3
t0
′ = I
I pp
pp -----3
t ′0
194 12/00
B 32 682
MFP
… B 32 686
Flyback application
permissible current Ipp versus rated capacitance C R
Frequency = 15,75 kHz
Frequency = 31,5 kHz
KMK0700-Q
20
A pp
KMK0701-Y
20
A pp
I pp
I pp
16
16
14
14
12
10
630 V
1000 V
1250 V
1600 V
2000 V
12
10
8
8
6
6
4
4
2
2
0
10 0
10 1
nF
10 2
C
0
10 0
Frequency = 95 kHz
KMK0702-7
20
A pp
I pp
16
14
630 V
1000 V
1250 V
1600 V
2000 V
12
10
8
6
4
2
0
10 0
10 1
nF
10 2
C
195 12/00
630 V
1000 V
1250 V
1600 V
2000 V
10 1
nF
10 2
C
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1