BAS16SL Small Signal Diodes Features • • • • • Connection Diagram Low Forward Voltage Drop Fast switching Very Small and Thin SMD package Profile height, 0.43mm max Footprint, 1.0 x 0.6mm 1 2 2 SOD-923F Marking: AB Absolute Maximum Ratings * Symbol 1 TA = 25°C unless otherwise noted Value Unit VRRM Maximum Repetitive Reverse Voltage 85 V IF(AV) Average Rectified Forward Current 150 mA IFSM Forward Surge Current (8.3mS Single Half Sine-Wave) 500 mA -55 to +150 °C TJ, TSTG Parameter Operating Junction & Storage Temperature Range * These ratings are limiting values above which the serviceability of the diode may be impaired. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD Parameter Power Dissipation Thermal Resistance, Junction to Ambient * RθJA * Minimum land pad. Electrical Characteristics Symbol Parameter Value Unit 227 mW 520 °C/W TA=25°C unless otherwise noted Test Conditions Min. Max. Unit VR Breakdown Voltage IR = 100μA VF Forward Voltage IF = 1mA IF = 10mA IF = 50mA IF = 150mA 85 715 855 1.0 1.25 mV mV V V IR Reverse Leakage VR = 75V VR = 25V@150°C VR = 75V@150°C 1.0 30 50 μA μA μA trr Reverse Recovery Time IF = IR= 10mA, irr = 0.1IR 8.0 nS Cj Junction Capacitance 2.0 pF VR = 0, f = 1.0MHz © 2010 Fairchild Semiconductor Corporation BAS16SL Rev. A3 V www.fairchildsemi.com 1 BAS16SL — Small Signal Diodes October 2010 BAS16SL — Small Signal Diodes Typical Performance Characteristics Figure 1. Forward Current Characteristics Figure 2. Reverse Leakage Current 100000 Reverse Current, IR[nA] Forward Current, IF[mA] 100 o T J=150 C o T J =85 C 10 o T J=25 C 10000 o TJ=150 C 1000 o TJ=85 C 100 10 o TJ=25 C 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 10 1.0 20 Forward Voltage Drop, V F[V] 30 40 50 60 70 80 90 100 Reverse Voltage, VR[V] Figure 3. Junction Capacitance Figure 4. Power Derating 2.0 300 250 Power Dissipation, [mW] Juntion Capacitance, CJ[pF] f=1mhz 1.8 1.5 1.3 150 100 50 0 1.0 0 2 4 6 8 0 10 25 50 75 100 125 150 o Reverse Voltage, VR[V] Ambient Temperature, Ta[ C] © 2010 Fairchild Semiconductor Corporation BAS16SL Rev. A3 200 www.fairchildsemi.com 2 BAS16SL — Small Signal Diodes Physical Dimensions SOD-923F 0.90 - 1.10 0.27 0.17 A 0.82 0.75 - 0.85 B 0.32 0.55 - 0.65 0.08 A B 2X 0.28 0.05 - 0.15 TOP VIEW LAND PATTERN RECOMMENDATION 0.43 Max 0.39 - 0.41 0.08 - 0.14 0.05 0.00 SEATING PLANE END VIEW SIDE VIEW 0.26 0.10 0.15 0.05 BOTTOM VIEW NOTES: A) THIS PACKAGE DOES NOT COMPLY TO ANY CURRENT PACKAGING STANDARD. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) BODY DIMENSIONS ARE INCLUSIVE OF BURRS, AND MOLD FLASH. D) DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994 E) LANDPATTERN BASED ON NOMINAL PACKAGE DIMENSIONS. F) DRAWING FILE NAME : SOD923F1REV2 Dimensions in Millimeters © 2010 Fairchild Semiconductor Corporation BAS16SL Rev. A3 www.fairchildsemi.com 3 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ Motion-SPM¥ OptoHiT™ OPTOLOGIC® ® OPTOPLANAR AccuPower¥ Auto-SPM¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® Fairchild® ® Fairchild Semiconductor FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FlashWriter®* FPS¥ ® PDP SPM™ Power-SPM¥ PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ ® * ® The Power Franchise TinyBoost¥ TinyBuck¥ TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TriFault Detect¥ TRUECURRENT¥* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I50 © Fairchild Semiconductor Corporation www.fairchildsemi.com