Order this document by BFR92ALT1/D SEMICONDUCTOR TECHNICAL DATA The RF Line Designed primarily for use in high–gain, low–noise, small–signal UHF and microwave amplifiers constructed with thick and thin–film circuits using surface mount components. • T1 suffix indicates tape and reel packaging of 3,000 units per reel. RF TRANSISTORS NPN SILICON MAXIMUM RATINGS Symbol Value Unit Collector–Emitter Voltage Rating VCEO 15 Vdc Collector–Base Voltage VCBO 20 Vdc Emitter–Base Voltage VEBO 2.0 Vdc IC 25 mAdc TJmax 150 °C PD(max) 0.273 3.64 W mW/°C Symbol Max Unit Tstg – 55 to +150 °C RθJC 275 °C/W Collector Current — Continuous Maximum Junction Temperature Power Dissipation, Tcase = 75°C Derate linearly above Tcase = 75°C @ THERMAL CHARACTERISTICS Characteristic Storage Temperature Thermal Resistance Junction to Case CASE 318–08, STYLE 6 SOT–23 LOW PROFILE DEVICE MARKING BFR92ALT1 = P2 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Max Unit Collector–Emitter Breakdown Voltage (1) (IC = 10 mA) V(BR)CEO 15 — Vdc Collector–Base Breakdown Voltage (IC = 100 µA) V(BR)CBO 20 — Vdc Emitter–Base Breakdown Voltage (IC = 100 µA) V(BR)EBO 2.0 — Vdc ICBO — 50 nA hFE 40 — — Collector–Emitter Saturation Voltage (1) (IC = 25 mA, IB = 5.0 mA) VCE(sat) — 0.5 Vdc Base–Emitter Saturation Voltage (1) (IC = 25 mA, IB = 5.0 mA) VBE(sat) — 1.2 Vdc Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 10 V) ON CHARACTERISTICS DC Current Gain (IC = 14 mA, VCE = 10 V) NOTE: 1. Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%. (continued) REV 7 RF DEVICE DATA MOTOROLA Motorola, Inc. 1995 BFR92ALT1 1 ELECTRICAL CHARACTERISTICS — continued (TA = 25°C unless otherwise noted) Characteristic Symbol Typ Unit Current–Gain — Bandwidth Product (IC = 14 mA, VCE = 10 V, f = 500 MHz) fT 4.5 GHz Noise Figure (VCE = 1.5 V, IC = 3.0 mA, RS = 50 Ω, f = 500 MHz) NF 3.0 dB Capacitance–Collector to Base (VCB = 10 Vdc, f = 1.0 MHz) Ccb 0.7 pF SMALL–SIGNAL CHARACTERISTICS PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. A L 3 B S 1 V 2 G C D H K J DIM A B C D G H J K L S V INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR CASE 318–08 ISSUE AE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 BFR92ALT1 2 ◊ *BFR92ALT1/D* BFR92ALT1/D MOTOROLA RF DEVICE DATA