ONSEMI NIC9N05TS1

NIC9N05TS1
Protected Power MOSFET
2.6 A, 52 V, N−Channel, Logic Level,
Clamped MOSFET w/ ESD Protection
http://onsemi.com
MAXIMUM RATINGS (TJ = 25°C unless otherwise specified)
Rating
Symbol
Value
Unit
Drain−to−Source Voltage Internally Clamped
VDSS
52−59
V
Gate−to−Source Voltage − Continuous
VGS
±15
V
TJ, Tstg
−55 to 150
°C
ESD
5000
500
Operating and Storage Temperature Range
Electro−Static Discharge Capability
(HBM)
(MM)
V
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
Drain
(Pins 2, 4)
Gate
(Pin 1)
RG
MPWR
Overvoltage
Protection
ESD Protection
Source
(Pin 3)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2008
September, 2008 − Rev. 0
1
Publication Order Number:
NIC9N05TS1/D
NIC9N05TS1
MOSFET ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) (Note 1)
Symbol
Characteristic
Min
Typ
Max
Unit
52
55
59
V
OFF CHARACTERISTICS
V(BR)DSS
Drain−to−Source Breakdown Voltage
(VGS = 0 V, ID = 1.0 mA, TJ = 25°C)
Zero Gate Voltage Drain Current
(VDS = 40 V, VGS = 0 V)
IDSS
Gate−Body Leakage Current
(VGS = ±8 V, VDS = 0 V)
(VGS = ±14 V, VDS = 0 V)
IGSS
10
±22
±10
mA
mA
ON CHARACTERISTICS
Gate Threshold Voltage
(VDS = VGS, ID = 100 mA)
VGS(th)
Static Drain−to−Source On−Resistance
(VGS = 3.5 V, ID = 0.6 A)
(VGS = 4.0 V, ID = 1.5 A)
(VGS = 10 V, ID = 2.6 A)
RDS(on)
1.3
1.75
2.5
190
165
107
380
200
125
0.81
0.66
1.5
V
mW
SOURCE−DRAIN DIODE CHARACTERISTICS
IS = 2.6 A, VGS = 0 V
IS = 2.6 A, VGS = 0 V, TJ = 125°C
Forward On−Voltage
VSD
1. Wafers tested prior to sawing.
ORDERING INFORMATION
Device
Shipping
NIC9N05TS1
5000 / Reel
http://onsemi.com
2
V
NIC9N05TS1
Layout view of the die in reel
http://onsemi.com
3
NIC9N05TS1
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NIC9N05TS1/D