RFHIC AP2221

MMIC
AP2221
Product Features
Application
• Small size
• SMD Type Package
• NO matching circuit needed
• High efficiency
• Dual supply voltage
• Higher linearity
• 12 pin Air cavity package
• Higher productivity
• Lower manufacturing cost
• GaAs MMIC
• 30 – 870MHz
• -60dBc CSO 135 Channels@ output Level +37dBmV
• -65dBc CTB 135 Channels@ output Level +37dBmV
• Satellite
• Converter
• CATV
Package : SP12
Description
The power amplifier is designed for base stations and repeater systems.
GaAs MMIC is used and attached on a copper carrier of 12 pin air cavity package with dual supply voltage.
Operating Ranges
PARAMETER
UNIT
MIN
Operating Frequency
MHz
30
Device Voltage
VDC
+6
+7
+12
Case Temperature
℃
-40
-
+85
RF Input Power
dBm
-
TYP
MAX
1000
+15
Specifications
T=25℃, Vdd=6.0, 75Ω system
Parameter
Units
Frequency Range
Supply Voltage
Single Ended CATV Evaluation
Current
S21-Gain
S21-Gain
S11-Input Return Loss
S22-Output Return Loss
OIP3
OIP1
Noise Figure
CSO
30 - 870MHz
CTB
XMD
MHz
V
mA
dB
dB
dB
dB
dBm
dBm
dB
dBc
dBc
dBc
Minimum
Typical
Maximu
30~870MHz
6
190
12
12
21
230
12.6
12.3
-20
-20
43
24
3.5
-60
-65
-60
Condition
Vdd=6V
270
30MHz
870MHz
-10
-10
5
-55
-60
-55
135 channels,+37dBmV/ch
135 channels,+37dBmV/ch
135 channels,+37dBmV/ch
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
T=25℃, Vdd=7.0, 75Ω system
Parameter
Units
Frequency Range
Supply Voltage
Single Ended CATV Evaluation
Current
S21-Gain
S21-Gain
S11-Input Return Loss
S22-Output Return Loss
OIP3
OIP1
Noise Figure
CSO
30 - 870MHz
CTB
XMD
MHz
V
Minimum
Typical
Maximu
Condition
30~870MHz
7
mA
dB
dB
dB
dB
dBm
dBm
dB
dBc
dBc
dBc
190
12
12
Vdd=7V
230
12.6
12.3
-19
-19
43
25
3.6
-60
-65
-60
22
270
30MHz
870MHz
-10
-10
5.1
-55
-60
-55
135 channels,+37dBmV/ch
135 channels,+37dBmV/ch
135 channels,+37dBmV/ch
NOTE
1. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz
Application Circuit: Forward (30MHz ~ 870MHz)
Vdd
10nF
10nF
1uH
WireWound
Input
D31250(Balun)
3.9nH
10nF
10nF
10nF
AP2221
1kohm
0.5pF
10nF
10nF
D31250(Balun)
10nF
Output
1uH
WireWound
10nF
10nF
Vdd
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
Performance Charts (Vdc=7V, Id=220mA, Tc=25℃)
Noise Figure Vs. Frequency
14
0
12
-10
10
-20
8
-30
6
-40
4
-50
30
100
200
300
400
500
600
700
800
900
5
Noise Figure(dB)
10
Gain(d B)
Return Lo ss(dB)
S-parameter Vs. Frequency
2
1000
4
3
2
1
0
30
100
200
300
Freq(MHz )
S11
S22
500
600
700
800
900
1000
700
800
900
1000
Freq(MHz )
Gain(dB)
NF(dB)
P1dB Vs. Frequency
OIP3 Vs. Frequency
28
48
26
46
OIP3(dBm)
P1dB(dBm)
400
24
22
20
18
44
42
40
38
16
36
30
100
200
300
400
500
600
700
800
900
1000
30
100
200
300
Freq(MHz )
400
500
600
Freq(MHz )
P1dB
OIP3
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
Multi-Tone Test 135ch@+30dBmV (Vdd +6V)
Level: +30dBmV
FRQ
Tilt: 135CH_FLAT
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_RAW
CSL_COR
CSL_FRQ
55.25
76.6
75.6
79.9
76.4
76.1
80.4
55.99
69.9
71
53.99
77.25
76.7
76
80.3
76.6
71.2
72.6
77.99
76.4
80.8
76.41
109.25
77.1
76.1
80.5
77.2
76.8
81.1
109.99
72.8
74.7
107.99
211.25
77.7
76.4
80.7
77.3
76.1
80.4
212.5
74.5
77.5
209.99
331.25
78.6
74.9
79.2
76.1
74.5
78.8
332.49
74.2
78.5
329.98
445.25
78.9
76
80.3
76.5
75.3
79.6
446.5
75.5
79.9
443.99
547.25
80.3
74.2
78.5
74.7
73.7
78
548.49
73.9
78.3
545.99
637.25
80.3
74.6
78.9
75.1
73.9
78.2
638.49
74.6
79
635.98
745.25
80.4
74.2
78.5
74.8
73
77.3
746.49
74.3
78.6
743.98
859.25
80.1
72.3
76.7
72.6
70.6
74.9
860.49
72.4
76.8
858.11
Min
76.6
72.3
76.7
72.6
70.6
72.6
55.99
69.9
71
53.99
Max
80.4
76.4
80.7
77.3
76.8
81.1
860.49
76.4
80.8
858.11
Multi-Tone Test 135ch@+30dBmV (Vdd +7V)
Level: +30dBmV
FRQ
Tilt: 135CH_FLAT
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_RAW
CSL_COR
CSL_FRQ
55.25
76.7
76
80.4
76.8
76.3
80.7
55.99
70.1
71
53.99
77.25
77.4
76.3
80.6
76.8
71.4
72.8
78
76.6
80.9
76.21
109.25
78
76.6
80.9
77.4
77
81.3
109.99
72.7
74.3
107.99
211.25
77.9
76.2
80.6
77.1
75.7
80.1
212.5
74
77.1
209.99
331.25
78.8
75.2
79.5
75.9
74.4
78.8
332.49
74.2
78.5
329.98
445.25
79.3
76.1
80.4
76.9
75.3
79.6
446.49
75.4
79.7
443.98
547.25
81.7
74.3
78.6
74.7
73.7
78
548.49
73.9
78.2
545.98
637.25
80.1
74.7
79
75.1
73.9
78.2
638.49
74.6
79
635.97
745.25
80.1
73.9
78.2
74.4
73
77.3
746.48
74
78.3
744
859.25
80.7
72.5
76.8
72.8
70.9
75.3
860.49
72.6
76.9
858.21
Min
76.7
72.5
76.8
72.8
70.9
72.8
55.99
70.1
71
53.99
Max
81.7
76.6
80.9
77.4
77
81.3
860.49
76.6
80.9
858.21
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
Multi-Tone Test 135ch@+37dBmV (Vdd +6V)
Level: +37dBmV
FRQ
Tilt: 135
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_RAW
CSL_COR
CSL_FRQ
55.25
61.9
68.4
68.6
83.4
78.4
80.1
56
63.4
63.4
53.99
77.25
61.9
69.8
70
83.5
65.5
65.5
78
83
87.3
75.9
109.25
62.5
68.3
68.4
84
78.4
79.8
109.99
67.2
67.3
107.99
211.25
62.5
68.8
68.9
84
74.4
75
212.49
70.1
70.3
209.98
331.25
63.7
68.5
68.6
82.4
72.4
72.9
332.49
72
72.4
329.99
445.25
64.1
69.2
69.3
83.5
73.1
73.5
446.49
73.9
74.4
443.99
547.25
65.7
70.1
70.4
81.5
72.6
73.2
548.5
74.9
76
545.98
637.25
65.7
69.8
70.1
82
72.7
73.3
638.49
76.9
78.6
635.98
745.25
65.4
70.7
71.2
81.4
70.2
70.6
746.49
77.5
79.7
743.99
859.25
65.3
71.7
72.5
79.7
67.3
67.6
860.49
78
82.4
858.49
Min
61.9
68.3
68.4
79.7
65.5
65.5
56
63.4
63.4
53.99
Max
65.7
71.7
72.5
84
78.4
80.1
860.49
83
87.3
858.49
Multi-Tone Test 135ch@+37dBmV (Vdd +7V)
Level: +37dBm
FRQ
Tilt: 135CH_FLAT
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_RAW
CSL_COR
CSL_FRQ
55.25
62.2
69
69.1
83.4
78.5
80.4
55.99
63.4
63.4
53.99
77.25
62.5
70.8
71.1
83.4
65.5
65.5
77.99
83
87.4
75.94
109.25
63.2
69.3
69.4
83.8
78.6
80.2
109.99
67.2
67.3
107.99
211.25
63.2
69.8
70
84
74.1
74.5
212.49
69.8
70
209.99
331.25
64.4
69.2
69.4
82.7
72.6
73
332.5
71.9
72.3
329.99
445.25
64.8
70.1
70.3
83.6
73.3
73.8
446.49
73.8
74.3
443.99
547.25
66.5
71.2
71.6
81.5
73.2
73.9
548.49
74.8
75.9
545.99
637.25
66.4
71
71.4
82.1
73.1
73.6
638.49
76.4
77.9
635.98
745.25
66.3
72
72.6
81.6
71
71.4
746.49
77
78.9
743.99
859.25
66.4
72.5
73.5
79.6
67.9
68.2
860.49
77.9
82.2
858.5
Min
62.2
69
69.1
79.6
65.5
65.5
55.99
63.4
63.4
53.99
Max
66.5
72.5
73.5
84
78.6
80.4
860.49
83
87.4
858.5
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
Multi-Tone Test 135ch@+40dBmV (Vdd +6V)
Level: +40dBmV
FRQ
Tilt: 135CH_FLAT
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_RAW
CSL_COR
CSL_FRQ
55.25
54.3
60.3
60.3
86.2
75.9
76.4
55.99
59.9
59.9
53.99
77.25
54.7
61.6
61.6
86.3
61.8
61.8
77.99
85.8
90.1
76.62
109.25
55.1
60
60
87.1
75.3
75.7
109.99
64
64
107.99
211.25
55.3
60.9
60.9
86.8
70.7
70.8
212.49
66.6
66.6
209.99
331.25
56.3
60.1
60.1
85.5
68.7
68.8
332.49
68.3
68.3
329.99
445.25
56.9
61.2
61.2
86.4
68.8
68.8
446.49
71
71.1
443.99
547.25
58.2
61.8
61.8
84.4
68.8
68.9
548.49
71.4
71.7
545.99
637.25
58.4
61.5
61.5
84.6
69
69.1
638.49
74.4
74.9
635.98
745.25
58
62.5
62.5
84.4
66.7
66.7
746.49
75.6
76.3
743.99
859.25
57.6
63.5
63.5
82.5
63.3
63.3
860.49
76.7
78.1
858.49
Min
54.3
60
60
82.5
61.8
61.8
55.99
59.9
59.9
53.99
Max
58.4
63.5
63.5
87.1
75.9
76.4
860.49
85.8
90.1
858.49
CSL_RAW
CSL_COR
Multi-Tone Test 135ch@+40dBmV (Vdd +7V)
Level: +40dBmV
FRQ
Tilt: 135CH_FLAT
XMD(NCTA)
CTB_RAW
CTB_COR
N-FLR
CSU_RAW
CSU_COR
CSU_FRQ
CSL_FRQ
55.25
55.3
61.5
61.5
86.2
76.1
76.5
56
60.1
60.1
53.99
77.25
55.2
62.9
62.9
86.4
61.7
61.7
78
85.9
90.2
76.06
109.25
56.1
61.2
61.2
86.9
75.4
75.8
109.99
63.9
63.9
108
211.25
56.3
62.3
62.3
86.9
71.4
71.5
212.5
66.4
66.4
209.99
331.25
57.4
61.1
61.1
85.4
69
69.1
332.5
68.3
68.3
329.99
445.25
57.8
62.3
62.3
86.4
69.6
69.7
446.49
70.7
70.8
443.99
547.25
59.6
62.8
62.8
84.4
69.4
69.5
548.49
71.9
72.2
545.99
637.25
59.1
63.1
63.1
85.1
69.5
69.6
638.49
73.9
74.3
635.98
745.25
59
63.9
63.9
84.4
66.8
66.8
746.49
74.4
74.9
743.99
859.25
59.5
65.3
65.3
82.5
63.6
63.6
860.49
77.9
79.8
858.49
Min
55.2
61.1
61.1
82.5
61.7
61.7
56
60.1
60.1
53.99
Max
59.6
65.3
65.3
86.9
76.1
76.5
860.49
85.9
90.2
858.49
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
MMIC
AP2221
ESD PROTECTION
Although much stronger to electrostatic discharge (ESD) than GaAs or Silicon technology, to be safe on all situations, it is recommended to have
proper ESD control techniques when handling these devices. Some of the precautions recommended are;
- Person at a workbench should be earthed via a wrist strap and a resistor.
- All mains-powered equipment should be connected to the mains via an earth-leakage switch.
- Equipment cases should be grounded.
- Relative humidity should be maintained between 40% and 50%.
- An ionizer is recommended.
- Keep static materials, such as plastic envelopes and plastic trays etc. away from the workbench
Dimension : PMBG-SQFP-12
Outline Drawing
Block Diagram
4
3
AMP2
3
7
(SQ.)
7
4
E
C
AMP1
10
1
1
12
10
12
D
F
Function
Pin No.
Input
7, 9
Output , Bias
1, 3
Ground
B
(SQ.)
A
(SQ.)
Land Pattern
4
1.02
2,4, 5, 6,8, 10, 11, 12
3
Backside Copper
F
G
1
H
J
K (SQ.)
INCH
No.
MM
0.282
A
7.16
0.2
B
5.08
0.246
C
6.25
0.069
1.75
0.015
D
E
0.03
F
0.76
0.2
G
0.51
0.4
H
1.02
0.14
J
0.36
0.83
K
M
2.1
0.32
M
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : 82-31-250-5011
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
0.38
0.8