ONSEMI CM1453-06CP

Praetorian® 6-Channel EMI Filter
Array with ESD Protection
CM1453-06CP
Features
Product Description
•
•
•
•
•
•
The CM1453-06CP is a pi-style EMI filter array with
ESD protection, which integrates filters (C-L-C) in
CSP form factor with 0.40mm pitch. Each EMI filter
channel of the CM1453-06CP is implemented as a 3pole L-C filter where the component values are
9.5pF-20nH-9.5pF. The roll-off frequency at -6dB
attenuation is 380MHz and can be used in
applications where the data rates are as high as
160Mbps while providing greater than -35dB over the
800MHz to 2.7GHz frequency range. The parts
include ESD diodes on every I/O pin, and provide a
high level of protection against electrostatic discharge
(ESD). The ESD protection diodes connected to the
filter ports are designed and characterized to safely
dissipate ESD strikes of ±15kV, beyond the
maximum requirement of the IEC61000-4-2
international standard. Using the MIL-STD-883
(Method 3015) specification for Human Body Model
(HBM) ESD, the pins are protected for contact
discharges at greater than ±30kV.
•
•
Six channels of EMI filtering
±15kV ESD protection
(IEC 61000-4-2, contact discharge)
±30kV ESD protection (HBM)
Greater than -40dB of attenuation at 1GHz
Chip Scale Package (CSP) with 0.40mm pitch
and 0.25mm CSP solder ball which features
extremely low parasitic inductance for optimum
filter and ESD performance
OptiGuard™ Coating for improved reliability at
assembly
RoHS compliant
Applications
•
•
•
•
•
•
LCD and Camera data lines in mobile handsets
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs
or notebook computers.
Wireless handsets
Handheld PCs/PDAs
LCD and camera modules
This device is particularly well suited for wireless
handsets, mobile LCD modules and PDAs because
of its small package format and easy-to-use pin
assignments. In particular, the CM1453-06CP is
ideal for EMI filtering and protecting data and control
lines for the LCD display and camera interface in
mobile handsets.
The CM1453-06CP incorporates OptiGuard™ which
results in improved reliability at assembly. It is
manufactured with a 0.40mm pitch and 0.25mm CSP
solder ball to provide up to 28% board space savings
vs. competing CSP devices with 0.50mm pitch and
0.30mm CSP solder ball.
©2010 SCILLC. All rights reserved.
April 2010 Rev. 2
Publication Order Number:
CM1453-06CP/D
CM1453-06CP
Electrical Schematic
m
1 of 6 Channels
PIN DESCRIPTIONS
PIN NUMBER
PIN
DESCRIPTION
PIN NUMBER
PIN
DESCRIPTION
A1
Filter #1
C1
Filter #1
A2
Filter #2
C2
Filter #2
A3
Filter #3
C3
Filter #3
A4
Filter #4
C4
Filter #4
A5
Filter #5
C5
Filter #5
A6
Filter #6
C6
Filter #6
B1
GND
–
B2
GND
–
B3
GND
–
Rev. 2 | Page 2 of 10 | www.onsemi.com
CM1453-06CP
Ordering Information
PART NUMBERING INFORMATION
Lead-free Finish
Bumps
Package
Ordering Part Number1
Part Marking
15
CSP
CM1453-06CP
N536
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
-65 to +150
°C
DC current per Inductor
30
mA
DC Package Power Rating
0.5
W
RATING
UNITS
-40 to +85
°C
Storage Temperature Range
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
Rev. 2 | Page 3 of 10 | www.onsemi.com
CM1453-06CP
ELECTRICAL OPERATING CHARACTERISTICS (NOTE 1)
SYMBOL
PARAMETER
CONDITIONS
LTOT
Total Channel Inductance
CTOT
Total Channel Capacitance (C1 x 2)
2.5V dc; 1MHz, 30mV ac
C1
Capacitance
2.5V dc; 1MHz, 30mV ac
VST
Stand-off Voltage
I = 10μA
ILEAK
Diode Leakage Current
VIN = 3.3V
VSIG
Signal Clamp Voltage
Positive Clamp
Negative Clamp
ILOAD = 10mA
ILOAD = -10mA
VESD
MIN
TYP
MAX
20
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
b) Contact Discharge per IEC 61000-4-2
Level 4
15.2
19
nH
22.8
9.5
pF
pF
5.5
5.6
-1.5
UNITS
V
0.1
1.0
μA
6.8
-0.8
9.0
-0.4
V
V
Notes 2 and 3
±30
kV
±15
kV
fC
Cut-off frequency
ZSOURCE = 50Ω, ZLOAD = 50Ω
300
MHz
fC
Roll-off frequency at -6dB Attenuation
ZSOURCE = 50Ω, ZLOAD = 50Ω
380
MHz
2.3
0.9
Ω
Ω
RDYN
Dynamic Resistance
Positive
Negative
Note 1: TA=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Unused pins are left open.
Rev. 2 | Page 4 of 10 | www.onsemi.com
CM1453-06CP
Performance Information
Typical Filter Performance (nominal conditions unless specified otherwise, 50 Ohm Environment)
Figure 1. I nsertion Loss VS. Frequency (CM1453-06: Filter 1)
Figure 2. I nsertion Loss VS. Frequency (CM1453-06: Filter 2)
Rev. 2 | Page 5 of 10 | www.onsemi.com
CM1453-06CP
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 50 Ohm Environment)
Figure 3. Insertion Loss VS. Frequency (CM1453-06: Filter 3)
Figure 4. Insertion Loss VS. Frequency (CM1453-06: Filter 4)
Rev. 2 | Page 6 of 10 | www.onsemi.com
CM1453-06CP
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 50 Ohm Environment)
Figure 5. Insertion Loss VS. Frequency (CM1453-06: CSP1 – Filter 5)
Figure 6. Insertion Loss VS. Frequency (CM1453-06: CSP1 – Filter 6)
Rev. 2 | Page 7 of 10 | www.onsemi.com
CM1453-06CP
Performance Information (cont’d)
Figure 7. Typical Diode Capacitance vs. Input Voltage
(normalized to 2.5V d.c)
Application Information
Refer to Application Note AP-217, "The Chip Scale Package", for a detailed description of Chip Scale
Packages offered by California Micro Devices. See http://www.wlcspforum.org/documents/pdf/ap-217.pdf for
download.
Rev. 2 | Page 8 of 10 | www.onsemi.com
CM1453-06CP
Mechanical Specifications
CM1453 devices are packaged in custom Chip Scale Packages (CSP). See Application Note AP-217 for more
information at: http://www.wlcspforum.org/documents/pdf/ap-217.pdf.
PACKAGE DIMENSIONS
Package
Custom CSP
Bumps
15
Millimeters
Inches
Dim
Min
Nom
Max
Min
Nom
Max
A1
2.429 2.474 2.519 0.0956 0.0974 0.0992
A2
1.099 1.144 1.189 0.0433 0.0450 0.0468
B1
0.395 0.400 0.405 0.0156 0.0157 0.0159
B2
0.195 0.200 0.205 0.0077 0.0079 0.0081
B3
0.342 0.347 0.352 0.0135 0.0137 0.0139
B4
0.342 0.347 0.352 0.0135 0.0137 0.0139
C1
0.187 0.237 0.287 0.0074 0.0093 0.0113
C2
0.175 0.225 0.275 0.0069 0.0089 0.0108
D1
0.545 0.615 0.685 0.0215 0.0242 0.0270
D2
0.368 0.419 0.470 0.0145 0.0165 0.0185
# per tape and
reel
Package Dimensions for
CM1453-06CP Chip Scale Package
3500 pieces
Controlling dimension: millimeters
Rev. 2 | Page 9 of 10 | www.onsemi.com
CM1453-06CP
CSP Tape and Reel Specifications
PART NUMBER
CHIP SIZE (mm)
POCKET SIZE (mm)
B0 X A0 X K0
TAPE WIDTH
W
REEL
DIAMETER
QTY PER
REEL
P0
P1
CM1453-06CP
2.47 X 1.14X 0.615
2.59 X 1.27 X 0.73
8mm
178mm (7")
3500
4mm
4mm
+
+
+
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”
parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the
rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or
use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action
Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855
Toll Free USA/Canada
Europe, Middle East and Africa Technical
Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
Rev. 2 | Page 10 of 10 | www.onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative