ONSEMI NTR3A30PZ

NTR3A30PZ
Power MOSFET
−20 V, −2.9 A, Single P−Channel
2.4 x 2.9 x 1.0 mm SOT−23 Package
Features
• Low RDS(on) Solution in 2.4 mm x 2.9 mm Package
• ESD Diode−Protected Gate
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
V(BR)DSS
RDS(on) Max
Applications
38 mW @ −4.5 V
• High Side Load Switch
• Battery Switch
• Optimized for Power Management Applications for Portable
−20 V
73 mW @ −1.8 V
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Drain−to−Source Voltage
Gate−to−Source Voltage
Drain Current (Note 1)
Drain Current (Note 1)
Power Dissipation
(Note 1)
P−Channel MOSFET
Symbol
Value
Unit
VDSS
−20
V
VGS
±8
V
ID
−2.9
A
Steady
State
TA = 25°C
TA = 85°C
−2.1
t≤5s
TA = 25°C
−4.7
Steady
State
TA = 25°C
PD
t≤5s
Pulsed Drain Current
A
Operating Junction and Storage Temperature
TJ,
TSTG
−55 to
150
°C
ESD HBM, JESD22−A114
VESD
2000
V
Source Current (Body Diode) (Note 2)
IS
−0.48
A
Lead Temperature for Soldering Purposes
(1/8 in from case for 10 s)
TL
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Max
Unit
Junction−to−Ambient – Steady State (Note 1)
RqJA
260
°C/W
Junction−to−Ambient – t ≤ 5 s (Note 1)
RqJA
100
S
2
MARKING DIAGRAM &
PIN ASSIGNMENT
Drain
3
SOT−23
CASE 318
STYLE 21
TRH M G
G
1
Gate
2
Source
TRH
= Specific Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending
upon manufacturing location.
ORDERING INFORMATION
Device
1. Surface−mounted on FR4 board using 1 in sq. pad size
(Cu area = 1.127 in sq. [1 oz] including traces).
2. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
3
1
1.25
−8.8
D
G
W
0.48
IDM
tp = 10 ms
−2.9 A
50 mW @ −2.5 V
Products, such as Smart Phones, Media Tablets, PMP, DSC, GPS, and
Others
Parameter
ID MAX
NTR3A30PZT1G
Package
Shipping†
SOT−23
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
April, 2013 − Rev. 0
1
Publication Order Number:
NTR3A30PZ/D
NTR3A30PZ
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
−20
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Typ
Max
Unit
OFF CHARACTERISTICS
10.5
ID = −250 mA, ref to 25°C
Zero Gate Voltage Drain Current
IDSS
VGS = 0 V,
VDS = −20 V
Gate−to−Source Leakage Current
IGSS
VDS = 0 V, VGS = ±5 V
VGS(TH)
VGS = VDS, ID = −250 mA
V
TJ = 25°C
mV/°C
−1
mA
±10
mA
−1.0
V
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
RDS(on)
Forward Transconductance
gFS
−0.4
−0.65
10.5
mV/°C
VGS = −4.5 V
ID = −3 A
31
38
VGS = −2.5 V
ID = −2.5 A
36
50
VGS = −1.8 V
ID = −1.5 A
51
73
VDS = −5 V, ID = −3 A
mW
30
S
1651
pF
CHARGES AND CAPACITANCES
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
129
Total Gate Charge
QG(TOT)
17.6
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
4.9
td(on)
100
VGS = 0 V, f = 1.0 MHz, VDS = −15 V
VGS = −4.5 V, VDS = −15 V, ID = −3 A
148
nC
0.7
2.4
SWITCHING CHARACTERISTICS (Note 4)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(off)
VGS = −4.5 V, VDS = −15 V,
ID = −3 A, RG = 6.0 W
tf
ns
208
1043
552
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
VSD
VGS = 0 V,
IS = −0.4 A
3. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
4. Switching characteristics are independent of operating junction temperatures.
http://onsemi.com
2
TJ = 25°C
0.65
TJ = 125°C
0.47
1.0
V
NTR3A30PZ
TYPICAL CHARACTERISTICS
20
−6 V
18
20
−2.5 V
−ID, DRAIN CURRENT (A)
−ID, DRAIN CURRENT (A)
14
12
−1.6 V
10
8
6
VGS = −1.4 V
4
0.5
1.0
1.5
2.0
2.5
3.5
3.0
4.0
4.5
12
10
8
6
TJ = −55°C
0.5
1.0
1.5
2.0
2.5
Figure 2. Transfer Characteristics
TJ = 25°C
ID = −3.0 A
0.09
0.08
0.07
0.06
0.05
0.04
1.5
2.0
2.5
3.0
3.5
4.0
−VGS, GATE VOLTAGE (V)
4.5
0.166
0.156
0.146
0.136
0.126
0.116
0.106
0.096
0.086
0.076
0.066
0.056
0.046
0.036
0.026
TJ = 25°C
VGS = −1.8 V
VGS = −4.5 V
VGS = −2.5 V
1
2
4
3
5
6
−ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
100,000
1.4
TJ = 150°C
VGS = −4.5 V
ID = −3.0 A
−IDSS, LEAKAGE (nA)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE
TJ = 125°C
4
Figure 1. On−Region Characteristics
0.10
1.3
TJ = 25°C
−VGS, GATE−TO−SOURCE VOLTAGE (V)
0.11
1.0
14
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0.12
0.03
0.02
16
2
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
0
VDS ≤ −5 V
18
−1.8 V
16
2
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
−3 V
1.2
TJ = 125°C
10,000
1.1
1.0
0.9
1000
0.8
0.7
−50
−25
0
25
50
75
100
125
150
100
2
4
6
8
10
12
14
16
18
TJ, JUNCTION TEMPERATURE (°C)
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
3
20
NTR3A30PZ
2000
1800
CISS
1600
1400
1200
VGS = 0 V
TJ = 25°C
f = 1 MHz
1000
800
600
400
COSS
200 C
RSS
0
0
2
4
6
8
10
12
14
18
16
20
5
15
4
VDS
QGS
2
QGD
0
0
2
4
6
VDS = −15 V
TJ = 25°C
ID = −3.0 A
1
6
8
10
12
14
16
3
0
18
QG, TOTAL GATE CHARGE (nC)
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
10
−IS, SOURCE CURRENT (A)
10,000
t, TIME (ns)
12
9
Figure 7. Capacitance Variation
td(off)
1000
tf
tr
td(on)
100
VGS = −4.5 V
VDD = −15 V
ID = −3.0 A
1
10
1
TJ = 25°C
TJ = 125°C
0.1
100
TJ = −55°C
0.2
0.4
0.6
0.8
1.0
1.2
RG, GATE RESISTANCE (W)
−VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
0.9
100
0.8
−ID, DRAIN CURRENT (A)
ID = −250 mA
0.7
−VGS(th) (V)
VGS
3
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
10
18
QT
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
C, CAPACITANCE (pF)
2400
2200
−VGS, GATE−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS
0.6
0.5
0.4
0.3
0.2
−50
−25
0
25
50
75
100
125
10
100 ms
1 ms
1
10 ms
0.1
0.01
150
0 ≤ VGS ≤ −8 V
Single Pulse
TC = 25°C
RDS(on) Limit
Thermal Limit
Package Limit
0.1
1
DC
10
TJ, JUNCTION TEMPERATURE (°C)
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 11. Threshold Voltage
Figure 12. Maximum Rated Forward Biased
Safe Operating Area
http://onsemi.com
4
100
NTR3A30PZ
TYPICAL CHARACTERISTICS
1000
50% Duty Cycle
R(t) (°C/W)
100
10
20%
10%
5%
2%
1%
1
0.1
Single Pulse
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
Figure 13. FET Thermal Response
http://onsemi.com
5
1
10
100
1000
NTR3A30PZ
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AP
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
D
SEE VIEW C
3
HE
E
DIM
A
A1
b
c
D
E
e
L
L1
HE
q
c
1
2
e
b
0.25
q
A
L
A1
MIN
0.89
0.01
0.37
0.09
2.80
1.20
1.78
0.10
0.35
2.10
0°
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.13
0.18
2.90
3.04
1.30
1.40
1.90
2.04
0.20
0.30
0.54
0.69
2.40
2.64
−−−
10 °
MIN
0.035
0.001
0.015
0.003
0.110
0.047
0.070
0.004
0.014
0.083
0°
INCHES
NOM
0.040
0.002
0.018
0.005
0.114
0.051
0.075
0.008
0.021
0.094
−−−
MAX
0.044
0.004
0.020
0.007
0.120
0.055
0.081
0.012
0.029
0.104
10°
STYLE 21:
PIN 1. GATE
2. SOURCE
3. DRAIN
L1
VIEW C
SOLDERING FOOTPRINT*
0.95
0.037
0.95
0.037
2.0
0.079
0.9
0.035
SCALE 10:1
0.8
0.031
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTR3A30PZ/D