Data Sheet Mechanical Drawing 11.0 MAX IN07024 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 8.0 MAX General Information Item Inductance @0Adc IN07024 0 Inductor AUG-07-2009 ---Specification Pins Spec S-F Inductance @Isat at 25degC S - F 180 nH +/- 15% 122 nH min DCR S-F Isat at 25degC S-F 41 Adc max Isat at -40degC S-F 45 Adc max Isat +125degC S-F 32 Adc max Idc S-F 38 Adc max 4.9 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) 2.1 2.5 (a) (b) unit:mm Sample Test Data Test Condition 1 MHz, 0.1Vrms, series 1 MHz, 0.1Vrms, series (41 Adc) 0.4 mOhm +/- 10% +25 deg C Schematic Recommended PCB Layout Remark 1. S 3.5 11.2 F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release Isat is the current at which the inductance drops by 15% typ. 2. Idc is the current at which the temperature of the part increases by 40 deg C. 2.5 3. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. unit:mm 4. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. 5. This is RoHS compliant product. 6. The operating temperature range is -40degC to +130degC. PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN07024 Inductance vs. Current 100.0 90.0 80.0 -40 degC 70.0 +125 degC 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 40 45 Current (A) Temperature VS Current Temperature(degC) % Inductance +25 degC 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 35 Current (DC) PAGE 2 OF 2