MCSO2 family package 5×3.2 mm From 10 kHz up to 225 MHz DIMENSIONS Recommended Solder Pad: 1.5 5.00 1.5 1 1.6 2.7 3 1 2 1 2.35 4 1.6 Package: Bottom view 1.6 1 2 4 3 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd 3.20 All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: -Avionics - Airbone equipments - Remote control - Security application - Radio Transceiver - Microprocessor clocks The MCSO2's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range (see orderding info) Including: adjustment at 25°C long term aging 10 years over supply voltage ±5% over load min to max Frequency stability version T Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max Supply voltage ± 5% 1)* Input current Output signal Symmetry at Vdd/2 Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) Rise & fall time ≥ 20MHz (load 15pf 10% to 90%) Level "0" & "1" Start-up time Load min / max ΔF/F ≤ ± 100 ppm ΔF/F ≤ ± 50 ppm Vdd Idd 1.8 / 2.5 / 3.3 / 5 see table 1 HC-MOS compatible 40 / 60 V % ≤7 ns ≤3 ns <0.4>Vdd-0.5 <5 3/47 V ms pF t * 1) C = 47nF ceramic must be connected between GND & Vdd TABLE 1: Idd Fz 32 kHz F=< 10MHz ≤ 20MHz >20 to 225MHz < 300μA < 2mA < 3mA < 25mA < 1mA < 4mA < 5mA < 30mA < 2mA < 6mA < 7mA < 40mA Frequency (Without load) W =Vdd = 2.5V V =Vdd = 3.3V blank=Vdd = 5V STANDARD FREQUENCIES: Frequency «MHz» 3.6864 4 8 10 12 16 20 24 40 48 12.8 14.7456 Other frequencies from 10 kHz up to 225 MHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks no resistance 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 5 x 3.2 x 1.6mm Lids Ceramic Terminations option T3 on request with tinned Ag/Cu/Zn Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO2 H V T - C 20MHz H blank ˃ 20MHz ≤ 20MHz Z W V blank = Vdd 1.8V = Vdd 2.5V = Vdd 3.3V = Vdd 5V T blank A B C X = +50ppm = ±100ppm E/D T3 XXX option 1 E/D enable / disable option 2 blank Au plasted T3 = tinned = 0 to 70°C = -40 to 85°C = -55 to 125°C = custom customer spec N° Frequency A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 11/02.2015