MCSO1 family package 8×4 mm From 10 kHz up to 225 MHz DIMENSIONS Package: Bottom view Recommended Solder Pad: 2,00 4 1 3,70 1,52 1 4 2 3 3,60 2,54 3 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 3,18 1,6 1,16 1,6 2,54 7,86 DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: -Avionics - Airbone equipments - Remote control - Security application - Radio Transceiver - Microprocessor clocks The MCSO1's are supplied on trays (91 pcs / tray) For pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max ELECTRICAL CHARACTERISTICS AT +25°C Frequency stability Over temperature range (see ordering info) Including:adjustment at +25°C long term aging 10 years over supply voltage ±5% over load min to max ΔF/F ≤ ± 100 ppm Frequency stability version T Over temperature range (see ordering info) Including:adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max ΔF/F ≤ ± 50 ppm Supply voltage ± 5% 1)* Version 1.2V avaible on request Vdd 1.8 / 2.5 / 3.3 / 5 V Input current Idd see table 1 Output signal HC-MOS compatible Symmetry at Vdd/2 40 / 60 % Rise & fall time ≤ 20MHz For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) ≤7 ns Rise & fall time ≥ 20MHz (load 15pf 10% to 90%) ≤3 ns <0.4>Vdd-0.5 V <5 ms 3/47 pF Level "0" & "1" Start-up time Load min / max t * 1) C = 47nF ceramic must be connected between GND & Vdd TABLE 1: Idd (Without load) Frequency F=32 kHz F=< 10MHz ≤ 20MHz >20 to 225MHz W=Vdd = 2.5V < 300μA < 2mA < 3mA < 25mA V=Vdd = 3.3V < 1mA < 4mA < 5mA < 30mA blank=Vdd = 5V < 2mA < 6mA < 7mA < 40mA STANDARD FREQUENCIES: Frequency «MHz» 3.6864 4 8 10 12 12.8 14.7456 16 20 24 40 48 120 160 Other frequencies from 10 kHz up to 225 MHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 20g Shocks no resistance 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 8 x 4 x 2mm Lids (standard) Kovar Lids (on request) Ceramic Height 2.5mm type MCSO1C Terminations option T3 on request with tinned Ag/Cu/Zn Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 1μs - No power E/D function (pin 1) before Vdd is setting on - E/D option not available for F ˂ 500 kHz - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO1 C H V T - C 20MHz C = Ceramic lids blank = Kovar lids option 1 E/D enable / disable H ˃ 20MHz blank ≤ 20MHz Z W V blank option 2 blank Au plasted T3 = tinned = Vdd 1.8V = Vdd 2.5V = Vdd 3.3V = Vdd 5V customer spec N° T = ±50ppm blank = ±100ppm A B C X E/D T3 XXX = 0 to 70°C = -40 to 85°C = -55 to 125°C = custom Frequency A unique part number will be generated for each product specification: i.e: 20xxxx-EA00 xxx pcs (in foam tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 11/02.2015