MCSO2EL very low consumption 32.768 kHz T range up to 200°C DIMENSIONS Recommended Solder Pad: 1.5 5.00 1.5 1 1.6 2.7 3 1 2 1 2.35 4 1.6 Package: Bottom view 1.6 1 2 4 3 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd 3.20 All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request Frequency stability included 1000h at Tmax ELECTRICAL CHARACTERISTICS AT +25°C DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. Applications: - Downhole and Well drilling equipments -Avionics - Airbone equipments - Geothermal equipments - Fire fighter equipments The MCSO2's are supplied on trays (128 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min Frequency stability Over temperature range C = -55 to +125°C (see ordering info) Including 2)* ΔF/F ≤ ± 100 Frequency stability Over temperature range E = -55 to +150°C (see ordering info) Including 2)* ΔF/F ≤ ± 150 Frequency stability Over temperature range D = -55 to +175°C (see ordering info) Including 2)* ΔF/F ≤ ± 300 Frequency stability Over temperature range G = -55 to +200°C (see ordering info) Including 2)* 3)* ΔF/F ≤ ± 400 Supply voltage ± 5% Vdd 2.5 / 3.3 / 5 Idd see table 1 Input current 1)* Output signal Rise & fall time (load 15pf 20% to 80%) Level "0" & "1" Load min / max V HC-MOS compatible Symmetry at Vdd/2 Start-up time ppm t 40 / 60 % 25 ns <0.4>Vdd-0.5 V <5 ms 3/27 pF * 1) C = 47nF ceramic must be connected between GND & Vdd Operable over 2.3 to 5.5V * 2)adjustment at +25°C, long term aging 1000h at Tmax ordered over supply voltage ±5% and over load min to max * 3)Only available with Supply voltage 5V Table 1: Idd Frequency (With load 10pF) F=32 kHz W=Vdd = 2.5V < 100μA V=Vdd = 3.3V < 110μA blank=Vdd = 5V < 120μA STANDARD FREQUENCIES: Frequency «kHz» 32.768 Other frequencies from up to 50 kHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance 10 to 2000Hz / 40g Shocks resistance 10000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 5 x 3.2 x 1.6mm Lids Ceramic Terminations option T3 on request (not available on G temperature range) with tinned Ag/Cu/Zn Pin 1 open→ Pin 3 Clock H → Clock L → Low E/D option 1 on request Reaction time ˂ 5mS - No power E/D function (pin 1) before Vdd is setting on - Disable option (consumption ≤5μA). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO2EL V - D 32kHz E/D T3 XXX option 1 E/D enable / disable W V blank = Vdd 2.5V = Vdd 3.3V = Vdd 5V C E D G X = -55 to 125°C = -55 to 150°C = -55 to 175°C = -55 to 200°C = custom option 2 blank Au plasted T3 = tinned customer spec N° Frequency A unique part number will be generated for each product specification: i.e: 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 11/08.2015