RG-Series Single/Double Pole Rocker & Paddle Switches The double pole version of the R-Series incorporates the same sleek lines as the original Curvette, in a double pole envelope. Features include silver-plated butt-action contacts which afford ratings to 20A/125, 15A 250VAC and withstand peak inrush currents up to 100 amps. Paddle or rocker actuators and a choice of solder lug, .250 Tab and wire lead terminations enable this switch to adapt to high current applications within the Power Supply, Appliance, Exercise Equipment and Music Equipment Industries. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | RG-Series Single/Double Pole Rocker & Paddle Switches Dielectric Strength Electrical Life UL/CSA: 1000V - live to dead metal parts & opposite polarity VDE: 4000V - live to dead metal parts; 1250V - opposite polarity & across open contacts 50,000 cycles RGSCA901 1 Base Part Number Mechanical Life 100,000 cycles Operating Temperature -40°F to 185°F (-40°C to 85°C) R P R Paddle B 3 Actuator Color A 4 Bezel Color 5 Rocker Legend 3 ACTUATOR COLOR1 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING1/TERMINATION 15A 250 VAC, 20A 125 VAC, 3/4 HP 125-250 VAC, 14(6)A 250 VAC Solder Lugs .250 Tabs Wire Leads Standard Base OFF-NONE-ON (Single Pole)RGSCA900 RGSCA901 RGSCA905 ON-NONE-ON (Single Pole) RGSCB900 RGSCB901RGSCB905 OFF-NONE-ON (Double Pole)RGSCC900 RGSCC901 RGSCC905 ON-NONE-ON (Double Pole)RGSCD900 RGSCD901RGSCD905 European Base (22 x 30 mm cutout) OFF-NONE-ON (Single Pole)RGSEA900 RGSEA901 RGSEA905 ON-NONE-ON (Single Pole) RGSEB900 RGSEB901RGSEB905 OFF-NONE-ON (Double Pole)RGSEC900 RGSEC901 RGSEC905 ON-NONE-ON (Double Pole)RGSED900 RGSED901 RGSED905 2 ACTUATOR STYLE B 2 Actuator Style B Black 4 BEZEL COLOR1 B Black 5 ROCKER LEGEND NO LEGEND OFF-ON vertical OFF-ON horizontal I-O horizontal I-O vertical Dual OFF-ON, I-O vertical Dual OFF-ON, I-O horizontal Rocker W White W White hot stamp 0 A B D E H J Notes: 1 Additional ratings and colors available. Consult factory. .125[3.18] X .150[3.81] 19 1.012[25.70] .250[6.35] PADDLE 1.145[29.08] .250 TA .080[2.03] .215[5.46] 1.181[30.00] 1.180[29.97] RGSC RGSE *Manufacturer reserves the right to change product specification without prior notice. TEST CUT HOLE IN ACTUAL MATERIAL TEST CUT HOLE IN ACTUAL MATERIAL .872[22.15] 1.000[25.4] 1.072[27.23] .725[18.42] 1.070[27.17] WIRE LEAD 1.125[28.58] +.000[.00] -.004[.10] +.004[.10] -.000[.00] 1.176[29.87] SOLDER LUG TERMINAL TYPE .866[22.00] .375[9.53] .500[12.70] .187[4.75] .C. .784[19.91] 1.240[31.50] 6.000[152.40] .275[6.99] RGSE 1.086[27.58] RGSC MOUNTING HOLE Panel Thickness: .025 min - .187 max. Specific cutout dimension range dependent on panel thickness and material. REV_SW_RG_0912 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com