Curvette R/RSC-Series Single Pole Rocker & Paddle Switches Since its introduction, the Curvette switch has become the barometer for versatility and performance in the miniature switch market. Self cleaning contacts, International approvals, along with a wide variety of circuits, ratings, and actuator options make the Curvette the switch of choice for many markets including Appliance, HVAC, Office Lighting, Transportation, Commercial Food and Lawn & Garden. Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: [email protected] • www.carlingtech.com 2 | Curvette R/RSC-Series Single Pole Rocker and Paddle Switches Dielectric Strength Mechanical Life UL/CSA: 1000V - live to dead metal parts VDE: 4000V - live to dead metal parts; 750V - across open contacts 100,000 cycles Operating Temperature 32°F to 185°F (0°C to 85°C) Electrical Life 100,000 cycles RA901 V B 1 Base Part Number 2 Actuator Style B 3 Actuator Color 4 Bezel Color/Style M P Momentary Rocker Paddle 3 ACTUATOR COLOR 1 2 Black (gloss) White (gloss) R V B W V 5 Rocker Legend 6 Visi-Rocker End/Legend Color 4 BEZEL COLOR/STYLE 1 BASE PART NUMBER: SERIES/CIRCUITRY/RATING1/TERMINATION 10A 250 VAC; 16A 125 VAC; 3/4 HP 125-250 VAC; 10(4) A 250 VACu T85 Solder Lugs .250 Tabs Wire Leads OFF-NONE-ON RA900 RA901RA905 ON-NONE-ON RB900 RB901RB905 ON-OFF-ON3 RC910 RC911RC915 OFF-NONE-ON2 RD220 RD221RD225 15A 250 VAC; 20A 125 VAC; 3/4 HP 125-250 VAC Solder Lugs .250 Tabs OFF-NONE-ONRSCA200 RSCA201 OFF-NONE-ON RSCB200RSCB201 2 ACTUATOR STYLE 9 STANDARD B Black (matte) W White (matte) 5 ROCKER LEGEND NO LEGEND Off-On vertical Off-On horizontal I-O horizontal I-O vertical dual OFF-ON/I-O Rocker Visi-rocker (2 color) OVAL 1 Black (gloss) 2 White (gloss) molded in 0 1 2 8 9 hot stamp 0 A B D E H 6 VISI-ROCKER END/LEGEND COLOR N B V W Black (matte) White (matte) N/A Black Visi-red White Notes: PC Terminals also available, consult factory for details. 1 For additional ratings, consult factory. 2 Rating is 8A 250 VAC, 12A 125 VAC, 1/2 HP 125-250 VAC, and must specify M actuator style. 3 Not rated at 3/4 HP 125-250 VAC ( ) indicates momentary function. .125[3.18] DIA 6.000[152.40] .250[6.35] .375[9.52] .080[2.03] .250 TAB (Q.C.) SOLDER LUG 1.125[28.58] MOMENTARY .550[13.97] .350[8.89] 1.070[27.17] .375[9.53] .710[18.03] .620[15.75] PADDLE *Manufacturer reserves the right to change product specification without prior notice. WIRE LEAD TERMINAL TYPE .187[4.75] .725[18.41] .500[12.70] .187[4.75] .250[6.35] TEST CUT HOLE IN ACTUAL MATERIAL .480[12.19] 1.072[27.23] MOUNTING HOLE Panel Thickness: .025 min - .187 max. Specific cutout dimension range dependent on panel thickness and material. Consult factory. REV_SW_R/RSC_0712 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: [email protected] • www.carlingtech.com