Carling Technologies Tippette Switches ™ Tippette Switches The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in those applications not requiring the more stringent sealing protection of the V-Series and L-Series switches. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Electrical Physical Contact Rating . . . . . . . . 15 amps, 125 VAC 10 amps, 250 VAC 3/4 HP 125-250 VAC 15 amps, 12-30 VDC Life . . . . . . . . . . . . . . . . 25,000 cycles circuit dependent 50,000 cycles circuit dependent consult factory for applicable circuits. Contacts . . . . . . . . . . . . . Fine silver, silver cad-oxide Terminals . . . . . . . . . . . . Brass or copper/silver plate 1/4” (6.3mm) Quick Connect terminations standard. Solder lug - Brass Tin Plated Wire Lead 16 gauge standard 105°C 600VAC Screw Terminals - Brass Mechanical Lighted . . . . . . . . . . . . . . Incandescent - rated 10,000 hours Neon - rated 25,000 hours Seals . . . . . . . . . . . . . . . Bracket - Actuator WBL/MBL optional external gasket panel seal Base . . . . . . . . . . . . . . . Phenolic (150°C) Rocker/Bracket . . . . . . . . Nylon 66 (105°C) Agency Certifications Select circuits and constructions with IEC approvals are available. Consult factory. Mounting Endurance . . . . . . . . . . . 100,000 cycles minimum 1.190[30.22] MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .040 min. - .250 max. .680[17.27] .830[21.08] 55° 4 plcs * 1.450[36.83] *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. 18 www.carlingtech.com Carling Technologies TIG/TIH/TII & LTIL/LTIG-Series Rocker & Paddle Switches ™ TIGA51 - 6M - BL - MBL 1 Base Part Number 2 Actuator Style 1 BASE PART NUMBER: SERIES/POLES/CIRCUITRY8, 11,13/RATING7/TERMINATION10 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 6-28VDC7 Single Pole in Double Pole base 2 Double Pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term. leads TIGA50 TIGA51 TIGA54 TIGA55 ON-NONE-OFF TIGK50 TIGK51 TIGK54 TIGK55 TIGA5A TIGA5B TIGA5E TIGA5F (ON)-NONE-OFF TIGK5A TIGK5B TIGK5E TIGK5F TIGA5L TIGA5M TIGA5S TIGA5T ON-NONE-(OFF) TIGK5L TIGK5M TIGK5S TIGK5T TIGB50 TIGB51 TIGB54 TIGB55 ON-NONE-ON TIGL50 TIGL51 TIGL54 TIGL55 TIGB5A TIGB5B TIGB5E TIGB5F ON-NONE-(ON) TIGL5A TIGL5B TIGL5E TIGL5F TIGC50 TIGC51 TIGC54 TIGC54 ON-OFF-ON TIGM50 TIGM51 TIGM54 TIGM55 TIGC5A TIGC5B TIGC5E TIGC5F ON--OFF-(ON) TIGM5A TIGM5B TIGM5E TIGM5F TIGC5L TIGC5M TIGC5S TIGC5T (ON)-OFF-(ON) TIGM5L TIGM5M TIGM5S TIGM5T Three Pole Four Pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term. leads TIHK50 TIHK51 TIHK54 TIHK55 ON-NONE-OFF TIIK50 TIIK51 TIIK54 TIIK55 TIHK5A TIHK5B TIHK5E TIHK5F (ON)-NONE-OFF TIIK5A TIIK5B TIIK5E TIIK5F TIHK5L TIHK5M TIHK5S TIHK5T ON-NONE-(OFF) TIIK5L TIIK5M TIIK5S TIIK5T TIHL50 TIHL51 TIHL54 TIHL55 ON-NONE-ON TIIL50 TIIL51 TIIL54 TIIL55 TIHL5A TIHL5B TIHL5E TIHL5F ON-NONE-(ON) TIIL5A TIIL5B TIIL5E TIIL5F TIHM50 TIHM51 TIHM54 TIHM54 ON-OFF-ON TIIM50 TIIM51 TIIM54 TIIM55 TIHM5A TIHM5B TIHM5E TIHM5F ON--OFF-(ON) TIIM5A TIIM5B TIIM5E TIIM5F TIHM5L TIHM5M TIHM5S TIHM5T (ON)-OFF-(ON) TIIM5L TIIM5M TIIM5S TIIM5T VDE APPROVED 10A 250VAC, 15A 125VAC, 12(6)A 250VAC T85 Single Pole in Double Pole base2 Double Pole solder .250 wire solder .250 wire lug tab lead lug tab lead TIGA90 TIGA91 TIGA95 ON-NONE-OFF TIGK90 TIGK91 TIGK95 TIGB90 TIGB91 TIGB95 ON-NONE-ON TIGL90 TIGL91 TIGL95 TIGC90 TIGC91 TIGC95 ON-OFF-ON TIGM90 TIGM91 TIGM95 Additional ratings up to 20A 125-277VAC, 1 1/2HP 125 VAC, 2HP 250VAC are available. Consult factory for specifics. 2 ACTUATOR STYLE 1S Angular/Smooth Face Gloss12 1C Angular/Cross Serations Gloss12 1F Flatted/Smooth Face Gloss12 1L Angular/Longline Serrations Gloss1,12 2L Long Smooth/Narrow16 6M 6S 7S 7N 7P 4 Bracket 3 Actuator Color Curved/Smooth Face Matte3 Curved/Smooth Face Gloss3 Rounded Paddle/Smooth Face Gloss1 Witch’s Hat/Narrow15 Witch’s Hat/Wide15 3 ACTUATOR COLOR9 BL black WH white 4 BRACKET A B C H NBL WBL MBL FN FN BLK FN SS FW NOTES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RD red 9 STYLE Screw Mount5 Screw Mount5,14 Screw Mount5 Screw Mount5 Nylon Black 4 Watershedding Black 4,6 Marine Style Black Metal Snap-In5 5 Black Metal Snap-In 5 Stainless Steel Snap-In Wide Stainless Steel Snap-In5 NBL, FN, & FW brackets only. For single pole switch in a single pole base, specify TIL with single pole circuitry/rating/termination. NBL, WBL, & MBL brackets only. With 6M actuator, brackets also will be matte finish. 6M & 6S actuators only Not available with 6M & 6S actuators. Consists of WBL bracket, neoprene seal, and dummy rivets at open holes. Consult factory for agency approval status. All ratings are appropriate for usage in low voltage applications. For additional special circuits, see page 21. Custom colors are available, consult factory. .187 tab and PC terminations are also available. Consult factory for catalog number callout. ( ) momentary Not available with WBL or MBL style brackets. Additional circuits available. See page 21. Available with single pole TIL-Series only. Available with bracket A, C or H only. Not available with MBL or H brackets. Can be supplied as a double rocker to control separate poles of a TIG, TIH or TII switch. Consult factory for details. LTILA51 - 6M - BL - RC - MBL - 12V 1 Base Part Number 2 Actuator Style 3 Actuator Color 4 Lens Color 1 BASE PART NUMBER: SERIES/POLES/ILLUMINATION/CIRCUITRY12/RATING10/TERMINATION14 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC illuminated Single Pole in Double Pole base illuminated Double Pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term leads LTILA50 LTILA51 LTILA54 LTILA55 ON-NONE-OFF LTIGK50 LTIGK51 LTIGK54 LTIGK55 LTILA5A LTILA5B LTILA5E LTILA5F (ON)-NONE-OFF LTIGK5A LTIGK5B LTIGK5E LTIGK5F LTILA5L LTILA5M LTILA5S LTILA5T ON-NONE-(OFF) LTIGK5L LTIGK5M LTIGK5S LTIGK5T LTILB50 LTILB51 LTILB54 LTILB55 ON-NONE-ON LTIGL50 LTIGL51 LTIGL54 LTIGL55 LTILB5A LTILB5B LTILB5E LTILB5F ON-NONE-(ON) LTIGL5A LTIGL5B LTIGL5E LTIGL5F LTILC50 LTILC51 LTILC54 LTILC55 ON-OFF-ON LTIGM50 LTIGM51 LTIGM54 LTIGM55 LTILC5A LTILC5B LTILC5E LTILC5F ON--OFF-(ON) LTIGM5A LTIGM5B LTIGM5E LTIGM5F LTILC5L LTILC5M LTILC5S LTILC5T (ON)-OFF-(ON) LTIGM5L LTIGM5M LTIGM5S LTIGM5T Additional ratings up to 12A 250VAC, 17A 125 VAC, 3/4 HP 125 VAC, 1HP 250VAC are available. Consult factory for specifics. Three pole switch is also available: Substitute H for fourth digit of part number. ex. LTIHK51 NOTES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 NBL, FN, & FW brackets only. Double pole circuits provided with 3 pole base. LTIL-Series with NBL, FN, & FW brackets only. NBL, WBL, & MBL brackets only. With 6M actuator, bracket will also be matte finish. 1S, 1C, 1L & 7S with NBL bracket only available with LTIL-Series. 6M, 6S actuators only. Not available with 6M and 6S actuators. Not recommended with neon lamps. Consists of WBL bracket, neoprene seal, dummy rivets at open holes. Consult factory for agency approval status. Not recommended with blue or green lenses. All ratings are appropriate for usage in low voltage applications. Custom colors and additional bracket styles are available, consult factory. ( ) - momentary All double throw circuits supplied with two lenses. To specify two different lens colors, specify second color, after first color. (ex. LTIGM51-6S-BL-RC/GN-WBL-12V) .187 tab and PC terminations are also available. Consult factory for catalog number callout. www.carlingtech.com 6 Lamp Voltage 5 Bracket 2 ACTUATOR STYLE4 1S Angular/Smooth Face Gloss1 1C Angular/Cross Serations Gloss1 1L Angular/Longline Serrations Gloss1 6M Curved/Smooth Face Matte3 6S Curved/Smooth Face Gloss3 7S Rounded Paddle/Smooth Face Gloss2 3 ACTUATOR COLOR11 BL black WH white RD red 4 LENS COLOR13 AM amber RC red LU blue7 CL clear GN green7 WH white 5 BRACKET NBL WBL MBL FN FN BLK FN SS 11 STYLE Nylon Black 5 Watershedding Black 5,8 Marine Style Black 4,6 Metal Snap-In 4,6 Black Metal Snap-In 4,6 Stainless Steel Snap-In 6 LAMP VOLTAGE incandescent 125N 125 volt 250N 250 volt neon9 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt 19 Carling Technologies Tippette Rocker & Bracket Styles ™ 1C 1L 1S CROSS-LINE W/ONE LENS LONG-LINE W/ONE LENS SMOOTH W/ONE LENS 1.700[43.18] 1.700[43.18] 1.700[43.18] .960[24.38] .650[16.51] .960[24.38] .418[10.62] 1.069[27.15] ±.020 .422[10.72] 1.069[27.15] 1.440[36.58] ±.020 1.440[36.58] .312[7.92] WITH.250 TAB TERMINALS AND NBL BRACKET .422[10.72] WITH SOLDER LUG TERMINAL AND NBL BRACKET 1F WITH.250 TAB TERMINALS AND NBL BRACKET 7S 6M, 6S FLATTED STYLE NO LENS TOGGLE-STYLE W/ONE LENS CURVED W/ONE LENS 1.700[43.18] .960[24.38] .650[16.51] .900[22.86] .900[22.86] 1.570[39.88] .418[10.62] .356[9.04] 1.570[39.88] .060[1.52] .828[21.03] 1.080[27.43] .060[1.52] 1.080[27.43] 1.069[27.15] WBL 1.084[27.53] MBL ±.02 ±.02 1.440[36.58] 0 .422[10.72] 0 .422[10.72] .312[7.92] WITH.250 TAB TERMINALS AND FN BRACKET WITH SOLDER LUG TERMINALS AND WBL/MBL BRACKET 1C TII-SERIES CROSS-LINE W ONE LENS 1.892[48.05] 1.134[28.80] .422[10.72] 1.302[33.07] 1.436[36.47] WITH .250 TAB TERMINALS AND A BRACKET 20 www.carlingtech.com WITH.250 TAB TERMINALS AND FN BRACKET Carling Technologies Tippette Actuator Styles ™ .650[16.51] .075[1.91] DIA .125[3.18] DIA .330[8.38] 1.069[27.15] .372[9.45] .392[9.95] .187[4.74] .055[1.40] DIA .437[11.09] .394[10.00] .250[6.35] .187[4.74] SOLDER LUG .250 TAB (Q.C.) TERMINAL TYPE .820[20.82] #6-32NC-2 THREAD 6.000[152.40] .370[9.39] .500[12.70] .286[7.26] 1.190[30.22] .075[1.905] IEC APPROVED CONSTRUCTION (TIG ONLY) 55˚ 4 plcs* 1.450[36.83] .650[16.51] 1.224[31.08] .957[24.30] WIRE LEAD MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. Switch should be mounted at 90° for maximum water shedding (45° to 90° acceptable) .830[21.08] .957[24.30] .650[16.51] 1.224[31.08] .957[24.30] 1L 1C 1S TIL,TIG,TIH,TII TIL,TIG,TIH,TII TIL,TIG,TIH,TII .312[7.92] .957[24.30] 1.224[31.08] PRINTED CIRCUIT * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. .650[16.51] 1.224[31.08] .187[4.75] .350[8.89] SCREW (ASSEMBLED) .680[17.27] .187[4.75] .141[3.58] 1.069[27.15] .490[22.86] .187 TAB (Q.C.) .650[16.51] 1.224[31.08] .957[24.30] 1.024[26.00] .300[7.62] 1F 2L TIG, TII TIL,TIG,TIH,TII 1.224[31.08] 6S TIG .630[16.00] .430[10.90] .650[16.51] .250[6.35] 1.035[26.28] .996[25.30] 1.224[31.08] .880[22.40] .880[22.4] 7S 7N 7P TIG TIG TIG Special Circuits for Tippette Rocker Switches Circuit Position 1 Progressive Two Circuit GG BOTH CIRCUITS ON GG BOTH CIRCUITS (ON) Single Pole Triple Throw GE ON Two Circuit GH CIRCUIT 1 ON GP CIRCUIT 2 ON Reversing Double Pole Double Throw GO ON GX ON () Position 2 Position 3 ONE CIRCUIT ON ONE CIRCUIT ON OFF OFF ON ON BOTH CIRCUITS ON CIRCUIT 1 ON CIRCUIT 2 ON OFF OFF NONE ON ON Indicates momentary function. www.carlingtech.com 21 Carling Technologies Tippette Mounting Bracket Styles ™ Dimensional Specifications: in. [mm] # 1.190[30.22] 6-32NC-2 TAP .680[17.27] .156[3.96] DIA .070[1.77] .830[21.08] 55° 4 plcs* .158[4.01] DIA 1.450[36.83] TAPPED HOLE CLEARANCE HOLE TIG TIL 1.940[49.27] (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. TIH TII 1.940[49.27] .078[1.98] MOUNTING HOLE Standard with C Bracket Standard with A & B Brackets 1.892[48.06] .078[1.98] .078[1.98] .078[1.98] 1.625[41.27] 1.625[41.27] 1.625[41.27] A A A TIG TIL 1.960[49.78] 2.093[53.16] 1.625[41.27] A TII TIH 2.090[53.08] .156[3.96] .156[3.96] 1.625[41.27] 1.625[41.27] B B TIL TII, TIG 1.875[47.62] 1.940[49.27] 2.062[52.37] .426[10.82] .426[10.82] .437[11.09] 1.625[41.27] 1.625[41.27] 1.625[41.27] C* C C TIL TIG TIH, TII 1.950[49.53] 1.700[43.18] GCP 1.350[34.29] GLOSS FINISH .960[24.38] 1.625[41.27] GMP MATTE FINISH HOLE PLUG FOR TIL, TIG, TIH & TII 1.570[39.88] H .430[10.92] TIG NARROW WIDE 1.126[28.60] .900[22.86] 22 MARINE / STD / WATERSHEDDING 1.750[44.45] 1.570[39.87] 1.700[43.18] .960[24.38] FN FW TIL, TIG, TIH, TII METAL, SNAP-IN TIL, TIG, TIH, TII METAL, SNAP-IN www.carlingtech.com MBL, NBL, WBL TIG BLACK NYLON, SNAP-IN