Issue Date: 2005-02-01 Page 1 of 10 Report Reference # E193009-A6-UL 2013-02-07 UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: Applicant Name and Address: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information Technology Equipment - Safety - Part 1: General Requirements) Component Recognition QQGQ2, QQGQ8 (Power Supplies for Information Technology Equipment Including Electrical Business Equipment) DC-DC Converter FDC10-BXYQ-z1z1z1z1z1z1, EL15-OXYQ-z1z1z1z1z1z1, FEC15-BXYQz1z1z1z1z1z1, EG10-OXYQ-z1z1z1z1z1z1 (B = 12, 24, 48; X = S, D; Y = 33, 05, 12, 15; Q = W, Blank; O= C, E, F; z1 = any alphanumeric for marketing purposes only), PM-09ED026, PM-08DD106, PM-08GD009, PM-15GD010, PM-10GD008, and PM15ID020. See enclosure 7-01 and 7-03 for details. (Optional) POWER MATE TECHNOLOGY CO LTD 36 22ND RD TAICHUNG INDUSTRIAL PARK TAICHUNG 408 TAIWAN Copyright © 2013 Issue Date: 2005-02-01 Page 2 of 10 Report Reference # E193009-A6-UL 2013-02-07 Engineering Conditions of Acceptability For use only in or with complete equipment where the acceptability of the combination is determined by UL LLC. When installed in an end-product, consideration must be given to the following: The following secondary output circuits are SELV: All output circuits of all models The following secondary output circuits are at non-hazardous energy levels: All output circuits of all models. The power supply terminals and/or connectors are: Suitable for factory wiring only The investigated Pollution Degree is: 2 The following end-product enclosures are required: Mechanical, Fire, Electrical The unit is intended to be installed in isolated secondary circuit which is separated from primary circuit by Reinforce or Double insulation. The unit only serves as Functional insulation only. The unit were tested on a 6.3 A time delay fuse protection circuit. If unit employed in end product not provided with overcurrent protective device or used on a protection circuit greater than this, additional testing may be necessary.