TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH320240T-009-I09Q MASS PRODUCTION CODE : PH320240T-009-I09Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 005 DRAWING NO. (Ver.) : LMD-PH320240T-009-I09Q ( Ver. 004 ) PACKAGING NO. (Ver.) : PKG-PH320240T-009-I09Q ( Ver. 002 ) Customer Approved Date: Approved Checked Designer 廖志豪 張慶源 謝志銘 Rex Liao Yuan Chang Robin Hsieh POWERTIP □ Preliminary specification for design input ■ Specification for sample approval 2011.06.13 TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 03/01/2010 01 001 New Drawing. - Ackey 04/21/2010 01 002 New Sample. - Ackey 07/26/2010 01 003 Add Pull Tape. Appendix Ackey 12/16/2010 01 004 Modify 1.5 Optical Characteristics. 6 Timter 06/10/2011 01 005 Modify the LCM Thickness Label of LCM Drawing. Appendix Robin Hsieh Total︰27 Page PH320240T-009-I09Q Page2 Sample Ver. 01 SPEC Edi. 005 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 2.2 2.3 2.4 Counter Drawing Interface Pin Description Timing Characteristics JUMPER(Setting different use) 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix : LCM Drawing. LCM Packaging Specifications. Note︰For detailed information please refer to IC data sheet : Primacy ( TFT LCD ): Himax : HX8218-A + HX8615A ( Or compatible IC ) PH320240T-009-I09Q Page3 Sample Ver. 01 SPEC Edi. 005 1. SPECIFICATIONS 1.1 Features Main LCD panel Item Standard Value Display Type 320 ( R、G、B ) * 240 Dots LCD Type Normally White, Transmissive type Screen size (inch) 5.7 inch Viewing Direction 6H Color configuration RGB - Strip Backlight LED Interface Digital 24-bits RGB Himax︰HX8218-A + HX8615A ( Or compatible IC ) THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side： Other (controller/driver IC) ROHS http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 159.4 ( W ) * 111.0 ( L ) * 10.5 ( H )( max ) mm Item Standard Value Unit Viewing Area 116.2 ( W ) * 87.4 ( L ) mm Active Area 115.2 ( W ) * 86.4 ( L ) mm Item Standard Value Unit Viewing Area 119.1 ( W ) * 93.8 ( L ) mm Active Area 115.17 ( W ) * 86.37 ( L ) mm LCD panel Touch panel Note：For detailed information please refer to LCM Drawing. PH320240T-009-I09Q Page4 Sample Ver. 01 SPEC Edi. 005 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDD AVSS = 0 -0.3 7.0 V Input Voltage VI - -0.3 VDD+0.3 V Operating Temperature TOP Excluded T / P -20 70 °C Storage Temperature TST Excluded T / P -30 80 °C 1.4 DC Electrical Characteristics GND = 0V, TA = 25°C Module Item Symbol Condition Min Typ Max Unit Power Supply Voltage VDD - 3.0 3.3 3.6 V VDD = 3.3 V Pattern = Full Display - 90 - mA VDD = 3.3 V Pattern = Black ( *1 ) - 95 140 mA Supply Current IDD Note︰*1. Maximum Current Display. PH320240T-009-I09Q Page5 Sample Ver. 01 SPEC Edi. 005 1.5 Optical Characteristics VDD = 3.3V, TA = 25°C TFT LCD Module Item Symbol Condition Min Typ Max Unit - Response Time Tr + Tf TA = 25°C θX, θY = 0° - 44 66 ms Note 2 CR ≥ 10 - 50 60 60 60 - Deg Note 4 CR 200 250 - - Note 3 X Y X Y X Y X Y 0.24 0.29 0.56 0.32 0.28 0.55 0.09 0.05 0.29 0.34 0.61 0.37 0.33 0.60 0.14 0.08 0.34 0.39 0.66 0.42 0.38 0.65 0.19 0.13 - Viewing Angle Top Bottom Left Right Contrast ratio White Color of CIE Red Coordinate （ With B / L & Touch Green Panel ） Blue θY+ θYθXθX+ TA = 25°C θX , θY = 0° Note 1 Average Brightness Pattern = White Display ( With B / L & Touch Panel ) IV IF = 200 mA 140 170 - Cd / m2 Uniformity ( With B / L & Touch Panel) △B IF = 200 mA 70 - - % PH320240T-009-I09Q Page6 Sample Ver. 01 SPEC Edi. 005 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH320240T-009-I09Q Tf Page7 Sample Ver. 01 SPEC Edi. 005 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ θX + = 9 0 ° X+ Y6 H Φ= 0 ° θY - = 9 0 ° PH320240T-009-I09Q Page8 Sample Ver. 01 SPEC Edi. 005 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min Max Unit Forward Current IF TA = 25℃ - 200 mA Power Dissipation PD TA = 25℃ - 2.4 W Electrical / Optical Characteristics Item Symbol Forward Voltage VF Average Brightness (Without LCD) IV Conditions IF = 200 mA Color Min Typ Max Unit 6.0 6.8 8.5 V 3800 4500 - Cd / m2 White Internal Circuit Diagram PH320240T-009-I09Q Page9 Sample Ver. 01 SPEC Edi. 005 1.7 Touch Screen Characteristic Item Input Method ITO Glass ITO Film Specification Finger or stylus pen. T = 1.1mm , 500Ω/□ ±150 Ω T = 0.175mm , 500Ω/□ ±150 Ω Non-Glare Type Operating Temperature -0℃~50℃, 20~90%RH(Except for dew gathering.) Storage Temperature -20℃~60℃,20~80%RH(Except for dew gathering.) Surface Hardness 3H- pressure 150gf , 45deg. Hitting Durability 1,000,000 times min. (Tip R 8 mm) Pen Sliding Durability 100,000 times min. (Tip R0.8mm) Insulation Impedance DC25V 1min,20MΩ↑ Light Transparency Linearity Operating Force Bouncing Impact Resistance Flexible Pattern Heat Seal Peeling Strength Flexible Pattern Bending Resistance Flexible Pattern Insert/Pull Out Resistance 78%min. ±1.5% (±3.0% After environmental and life test) 130gf least input with stylus pen (R0.8mm) or input with finger(R 8.0mm) <10ms No damage when ψ9mm steel ball is dropped on the surface from 30 cm height at 1 time. 500gf/cm ( peeling upward by 90 deg.) Bending 3 times by bending radius R1.0 mm. The requirements in 4-2 shall be satisfied 5 times at least. The requirements in 4-2 shall be satisfied. Vibration Resistance Not in operation: The requirements in 3 to 4 shall be satisfied after sweep vibration of 2G 10~55Hz(1 min.) is given for 30 min. each in the directions of X, Y, Z. Package Drop No damage to the product.(1corner edge, 2 ridges, 4 surfaces, drop from 50 cm height 65 cm for the bottom) Static load resistance PH320240T-009-I09Q After 4.5Kg load is applied to The center area(25cm²)of the Touch panel, the requirements in 3 and 4,shall be satisfied. Page10 Sample Ver. 01 SPEC Edi. 005 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH320240T-009-I09Q Page11 Sample Ver. 01 SPEC Edi. 005 2.2 Interface Pin Description Pin No. Symbol 1 VDD 2 VDD 3 VDD 4 VDD 5 VSYNC 6 ENB Data enable control. 7 VSS Ground. 8 DCLK 9 VSS 10 HSYNC 11 B7 data bit B7. 12 B6 data bit B6. 13 B5 data bit B5. 14 B4 data bit B4. 15 B3 data bit B3. 16 B2 data bit B2. 17 B1 data bit B1. 18 B0 data bit B0. 19 G7 data bit G7. 20 G6 data bit G6. 21 G5 data bit G5. 22 G4 data bit G4. 23 G3 data bit G3. 24 G2 data bit G2. 25 G1 data bit G1. 26 G0 data bit G0. 27 R7 data bit R7. 28 R6 data bit R6. 29 R5 data bit R5. 30 R4 data bit R4. 31 R3 data bit R3. 32 R2 data bit R2. 33 R1 data bit R1. PH320240T-009-I09Q Function Analog power. Vertical sync input. Dot data clock . Ground. Horizontal sync input. Page12 Sample Ver. 01 SPEC Edi. 005 Interface Pin Description(CONT.) Pin No. Symbol Function 34 R0 35 VSS Ground. 36 VSS Ground. 37 NC No use.. 38 NC No use. 39 NC No use. 40 NC No use. data bit R0. Backlight Pin Description Pin No. Symbol 1 A 2 NC 3 K Function Power supply for LED Backlight anode input. No use. Power supply for LED Backlight cathode input. Touch Panel Pin Description Pin No. 1 2 3 4 Symbol YX+ Y+ X- PH320240T-009-I09Q Function BOTTOM.(YU) RIGHT.(XR) TOP.(YD) LEFT.(XL) Page13 Sample Ver. 01 SPEC Edi. 005 2.3 Timing Characteristics Signal Dclk Data Hsync Item Symbol Frequency Dclk 6.4 MHz High Time Tch 78 ns Low Time Tcl 78 ns Setup Time Tds 12 ns Hold Time Tdh 12 ns Period TH 408 DCLK Pulse Width Thp DCLK Back-Porch Thb 30 38 Display Period Thd 320 DCLK Front-Porch Thf 20 DCLK Period NTSC Vsync Back-Porch NTSC PAL Display Period Front-Porch NTSC PAL Typ. Max. Unit DCLK 262.5 Tv PAL Pulse Width Min. TH 312.5 1 Tvp 3 5 TH 15 Tvb TH 23 240 Tvd TH 4.5 Tvf TH 46.5 TCLK TCH TCL 2.64V DCLK 0.66V TDS TDH 2.64V DATA PH320240T-009-I09Q 0.66V Page14 Sample Ver. 01 SPEC Edi. 005 DCLK DATA(R) Blacking Data R0 R1 R2 R3 R4 R5 DATA(G) Blacking Data G0 G1 G2 G3 G4 G5 Blacking Data B0 B1 B2 B3 B4 B5 DATA(B) ENB TV VSYNC TVP TVB TVD TVF HSYNC TH HSYNC TCLK THP DCLK THB DATA PH320240T-009-I09Q THD THF Valid Data Page15 Sample Ver. 01 SPEC Edi. 005 Color Data Assignment 2.4 JUMPER(Setting different use) : J1-1, J2-2, J3-2, J4-1, J5-1, J6-2. PH320240T-009-I09Q Page16 Sample Ver. 01 SPEC Edi. 005 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH320240T-009-I09Q run & Reliability test Inspection NG Shipment Ship out Page17 Sample Ver. 01 SPEC Edi. 005 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH320240T-009-I09Q 2. Process improvement proposal 4. Education And Training Activities Page18 Sample Ver. 01 SPEC Edi. 005 3.2. Inspection Specification PH320240T-009-I09Q Page19 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page20 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page21 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page22 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page23 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page24 Sample Ver. 01 SPEC Edi. 005 PH320240T-009-I09Q Page25 Sample Ver. 01 SPEC Edi. 005 4. RELIABILITY TEST 4.1 Reliability Test Condition (Ver.B01) NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test 2 Low Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in –30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ 4 → (30mins) Temperature Cycling Storage Test +25℃ → +80℃ → (5mins) (30mins) 10 Cycle +25℃ (5mins) Surrounding temperature, then storage at normal condition 4hrs. 5 ESD Test Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 6 Vibration Test (Packaged) 1. Sine wave 10∼55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm Each direction (X、Y、Z) duration for 2 Hrs 7 Drop Test (Packaged) 3. Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH320240T-009-I09Q Page26 Sample Ver. 01 SPEC Edi. 005 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH320240T-009-I09Q Page27 Sample Ver. 01 SPEC Edi. 005