TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH240320T-062-L06Q MASS PRODUCTION CODE : PH240320T-062-L06Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. : JLMD- PH240320T-062-L06Q_001 PACKAGING NO. : JPKG- PH240320T-062-L06Q_001 Customer Approved POWERTIP 2012.12.04 Date: JS RD APPROVED Approved Checked Designer 閆偉 劉進 趙冬冬 □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date Ver. Edi. Description Page Design by 2012/8/31 01 001 New Drawing - 趙冬冬 2012/11/29 01 002 New Sample - 趙冬冬 Total: 26 Page PH240320T-062-L06Q Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 1.7 Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：1. LCM Drawing 2. Packaging PH240320T-062-L06Q Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features Main LCD Panel Item Standard Value Display Type 240 * (R、G、B) * 320 Dots LCD Type a-Si TFT , Normally white TN mode , Transmissive Screen size(inch) 2.4 (Diagonal) Viewing Direction 12 O’clock Color configuration R.G.B. vertical stripe Backlight White LED Interface 16-bit interface for i80system Other(controller / driver IC) ILI9341 ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 42.72 (W) * 60.26 (L) * 3.85(H)(max) mm Item Standard Value Unit Active Area 36.72 (W) * 48.96 (L) mm Item Standard Value Unit Viewing Area 38.32 (W)* 50.26 (L)(min) mm Active Area 37.52 (W) * 49.76 (L) mm LCD Panel TP Panel Note : For detailed information please refer to LCM drawing PH240320T-062-L06Q Page4 SAMPLE Ver.01 SPEC Edi.002 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit VDDI - -0.3 +4.6 V VGH-VGL - -0.3 +32.0 V Input Voltage VIN - -0.3 VDD+0.3 V Operating Temperature TOP - -20 +70 °C Storage Temperature TST - -30 +80 °C Storage Humidity HD Ta ≦ 60 °C 20 90 %RH System Power Supply Voltage 1.4 DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage1 VDDI - 2.5 2.8 3.3 V Input High Voltage VIH - 0.7*VDDI - VDDI V Input Low Voltage VIL - VSS - 0.3*VDDI V Output High Voltage VOH IOH=-1.0 mA 0.8*VDDI - VDDI V Output Low Voltage VOL IOL=+1.0mA VSS - 0.2*VDDI V Supply Current IDD VDDI= 2.8V, Pattern=Black*1 - 7.7 12 mA Note1 : Maximum current display PH240320T-062-L06Q Page5 SAMPLE Ver.01 SPEC Edi.002 1.5 Optical Characteristics VDDI = 2.8V, Ta=25°C TFT LCD Panel Item Symbol Condition Min. Typ. Max. unit Response time Tr + Tf Ta = 25°C θX, θY = 0° - 25 38 ms - 50 - - 25 - - 45 - Viewing angle Top θY+ Bottom θY- Left θX- Right θX+ - 45 - CR 200 250 - X 0.23 0.28 0.33 Y 0.25 0.30 0.35 0.53 0.58 0.63 0.29 0.34 0.39 0.27 0.32 0.37 Y 0.54 0.59 0.64 X 0.09 0.14 0.19 Y 0.01 0.06 0.11 Contrast ratio White Color of CIE Coordinate (With B/L) X Red Y X Green Blue CR ≥ 10 Ta = 25°C θX , θY = 0° Note2 Deg. Note4 - Note3 - Note1 Average Brightness 140 155 cd/m2 Note1 Pattern=white display IV IF=20mA (With B/L) Uniformity △B IF=20mA 80 % Note1 (With B/L) Note1: 1：△B=B(min) / B(max) × 100% 2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast PH240320T-062-L06Q Page6 SAMPLE Ver.01 SPEC Edi.002 Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θ X = θ Y = 0° 12H Φ = 180 ° Φ = 270 ° θY- θY+ θ X - = 90 ° X- θ Y + = 90 ° Y+ θX- θX+ Φ = 90 ° Φ θ X + = 90 ° X+ Y6H Φ=0° θ Y - = 90 ° PH240320T-062-L06Q Page7 SAMPLE Ver.01 SPEC Edi.002 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 30 mA Forward Voltage VF Ta =25℃ - 14.4 V Reverse Voltage VR Ta =25℃ - 5 V Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF IF=20mA 12.4 13.2 14.4 V Average Brightness ( without LCD & T/P) IV 3800 4200 - cd/m2 0.25 0.28 0.31 0.25 0.28 0.31 Color of CIE Coordinate (without LCD & T/P) X IF=20mA Y Color - White Internal Circuit Diagram : PH240320T-062-L06Q Page8 SAMPLE Ver.01 SPEC Edi.002 1.7 Touch Panel Characteristics 1.7.1 General Standard Specification Item Specification Input Method Finger or Stylus pen. ITO Glass 400±100 Ω Glass. ITO Film 470±100 Ω Clear Hard-Coating Operating Temperature Range Storage Temperature Range -10℃~60℃,20~85%RH. (Except for dew gathering) -20℃~70℃, 10%RH ~ 90%RH.(Except for dew gathering) Surface Hardness 3H pencil pressure 1N/45 Hitting Durability 1,000,000 times (R8,hardness 60°,120gf) Pen Sliding Durability Insulation Impedance Light Transparency 100,000 times (R0.8mm,with 120gf) ≧20MΩ/25V(DC) ≧80%-550nm Linearity ≦1.5% Linearity Force 10g~80g input with stylus pen. (R0.8mm) Activation Force 50gf(Typical 20gf)less individual point on with stylus pen 9R0.8mm Bouncing ≤10ms. Impact Resistance No damage when ψ9mm steel ball is dropped on the surface from 30 cm height at 1 time. Flexible pattern Heat Seal Peeling Strength 500gf/cm (peeling upward by 90deg) Flexible pattern Bending Bending 3 times by bending radius R1.0 mm The requirements Resistance in4-2shall be satisfied Flexible Pattern Insert/Pull 5times at least .The requirements in 4-2shall be satisfied. Out Resistance Vibration Resistance Not in operation :The requirements in 3 to 4 shall be satisfied after sweep vibration of 2G15~55Hz(1min) is given for 30 min ,each in the directions of X,Y,Z. Package Drop No damage to the product.(1 corner edge,2ridges,4 surfaces ,drop from 50 cm height). Static load resistance After 4.5Kg load for 1 min is Applied to the center area (25c ㎡)of the Touch panel ,the requirements in 3 and 4,shall be satisfied. PH240320T-062-L06Q Page9 SAMPLE Ver.01 SPEC Edi.002 1.7.2 Electrical Characteristics Item Specification Operating Voltage DC 5V. (Max : 7V DC) Bouncing ≦10ms Insulation Resistance ≧20MΩ/25V(DC) Resistance Between Terminals Linearity PH240320T-062-L06Q Direction X : 200Ω~ 600Ω. Direction Y : 250Ω~ 900Ω. X≦1.5%, Y≦1.5% Page10 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH240320T-062-L06Q Page11 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description Pin No. Symbol 1 DB0 Bi-directional data bus. 2 DB1 Bi-directional data bus. 3 DB2 Bi-directional data bus. 4 DB3 Bi-directional data bus. 5 VSS System ground.(0V) 6 VDDI Low voltage power supply for interface logic circuits (1.65 ~ 3.3 V) 7 CSX Chip select signal , Active “L”. 8 D/CX Command / Display data selection. 0 : Command , 1 : Display data. 9 WRX 10 RDX 11 IM0 IM3=0,IM2=0,IM1=0,IM0=1,80 MCU 16-bit bus interfaceⅠ, D[15:0] 12 X+ Touch Panel control pin. 13 Y+ Touch Panel control pin. 14 X- Touch Panel control pin. 15 Y- Touch Panel control pin. 16 LEDA Power supply for LED Backlight Anode input. 17 LEDk Power supply for LED Backlight Cathode input. 18 NC 19 NC 20 NC 21 IM3 IM3=0,IM2=0IM1=0,IM0=1,80 MCU 16-bit bus interfaceⅠ, D[15:0] 22 DB4 Bi-directional data bus. 23 DB8 Bi-directional data bus. 24 DB9 Bi-directional data bus. 25 DB10 Bi-directional data bus. PH240320T-062-L06Q Function 8080-Ⅰsystem (WRX): Serves as a write signal and writes data at the rising edge. 8080-Ⅰsystem (RDX): Serves as a read signal and MCU read data at the rising edge. NC Page12 SAMPLE Ver.01 SPEC Edi.002 26 DB11 Bi-directional data bus. 27 DB12 Bi-directional data bus. 28 DB13 Bi-directional data bus. 29 DB14 Bi-directional data bus. 30 DB15 Bi-directional data bus. 31 RESX This signal will reset the device and must be applied to properly initialize the chip.Signal is active low. 32 VCI 33 VDDI Low voltage power supply for interface logic circuits (1.65 ~ 3.3 V) 34 VSS System ground.(0V) 35 DB5 Bi-directional data bus. 36 DB6 Bi-directional data bus. 37 DB7 Bi-directional data bus. PH240320T-062-L06Q High voltage power supply for analog circuit blocks (2.5 ~ 3.3 V) Page13 SAMPLE Ver.01 SPEC Edi.002 2.3 Timing Characteristics 80-System Bus Interface I PH240320T-062-L06Q Page14 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page15 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH240320T-062-L06Q run & Reliability test Inspection NG Shipment Ship out Page16 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH240320T-062-L06Q 2. Process improvement proposal 4. Education And Training Activities Page17 SAMPLE Ver.01 SPEC Edi.002 3.2 Inspection Specification PH240320T-062-L06Q Page18 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page19 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page20 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page21 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page22 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page23 SAMPLE Ver.01 SPEC Edi.002 PH240320T-062-L06Q Page24 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in +80℃ ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30℃ ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ →+80℃→ +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PH240320T-062-L06Q Page25 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH240320T-062-L06Q Page26 SAMPLE Ver.01 SPEC Edi.002