TECH. CORP. SPECIFICATIONS CUSTOMER : OKAYA SAMPLE CODE : PS1602LRS-JWA-B-01 MASS PRODUCTION CODE : PC1602LRS-JWA-B-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : JLMD-PC1602LRS-JWA-B-Q_001 PACKAGING NO. (Ver.) : JPKG-PC1602LRS-JWA-B-Q_001 Customer Approved POWERTIP 2013.04.02 Date: JS RD APPROVED Approved Checked Designer 閆偉 張久慧 劉進 □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 RECORDS OF REVISION Date Ver Edi Description Page Design by 10/30/2004 0 - New sample 07/14/2011 01 001 Update Specification - 劉進 04/02/2013 01 002 Modify Pin Description 12 劉進 30 Pages PC1602LRS-JWA-B-Q Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2.1 Application Notes 2.2.2 Refer Initial Code 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Display Command 2.5 Character Pattern 2.6 JUMPER 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 5.2 5.3 5.4 Safety Handling Storage Terms of Warranty Appendix：LCM Drawing Packaging PC1602LRS-JWA-B-Q Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features 1.2 Item Standard Value Display Type 16*2 characters LCD Type STN , Gray, Positive , Transflective , Normal Temp Driver Condition LCD Module: 1/16uty , 1/4Bias Viewing Direction 6 O’clock Backlight Yellow-green LED Backlight Weight 35 g Interface 4 bit or 8 bit MPU interface Driver IC ST7066U,KS0065B ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news/LatestNews.asp Mechanical Specifications Item Standard Value Unit Outline Dimension 85.0（L）*30.0（W）*13.6max（H） mm Viewing Area 64.5(L)*17.2(W) mm Active Area 57.7(L)*9.4(W) mm Dot Size 0.50(L)*0.55(W) mm Dot Pitch 0.55(L)*0.60(W) mm Note：For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 7.0 V LCD Driver Supply Voltage VLCD - Input Voltage VIN - -0.3 VDD+0.3 Operating Temperature TOP Excluded B/L 0 50 Storage Temperature TST Excluded B/L -20 70 Storage Humidity Hd Ta<40 ℃ - 90 PC1602LRS-JWA-B-Q Page4 VDD-10.0 VDD+0.3 V V ℃ %RH SAMPLE Ver.01 SPEC Edi.002 1.4 DC Electrical Characteristics VDD =5.0±10%V,Vss=0V，Ta=25℃ Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 4.5 5.0 5.5 V “H” Input Voltage VIH - 0.7VDD - VDD V “L” Input Voltage VIL - -0.3 - 0.6 V “H” Output Voltage VOH IOH=-0.1mA 3.9 - VDD V “L” Output Voltage VOL IOH=0.1mA - - 0.4 V Supply Current IDD VDD=5.0V - 1.5 - mA 0℃ - - - 25℃*1 - 3.6 - 50℃ - - - LCM Driver Voltage VOP*3 V NOTE: *1.THEVOP test point is VDD-V0 1.5 Optical Characteristics LCD Panel：1/16Duty，1/5Bias，Vlcd=4.8V,Ta=25 ℃ Item Viewing angle range Symbol Condition Min. Typ. Max. Unit Θ C>2.0, ∅ =270° 45 - - Deg. Note 1 Contrast ratio CR θ = 0°,∅ =270° - 7 - - Note 3 Response time（Rise） Tr - 200 - ms Note 2 Response time（Fall） Tf - 300 - ms Note 2 PC1602LRS-JWA-B-Q C>2.0,∅ =270° Page5 SAMPLE Ver.01 SPEC Edi.002 N ote 1. O ptical characteristics-2 V iew ing angle R ear (12H ) φ =90° T op (θ =0°) θL θR θ+ θ- Left (9H ) φ =180° R ight (3H ) φ =0° Front (6H ) φ =270° V iew ing angle PC1602LRS-JWA-B-Q Page6 SAMPLE Ver.01 SPEC Edi.002 N ote 2. O ptical characteristics-3 Fig.2 D efinition of response tim e Positive Type N o selected w aveform N o selected w aveform Selected w aveform Transm ittance 10% 90% 100% Tf Tr N egative Type N o selected w aveform N o selected Selected w aveform Transm ittance 100% 90% 10% Tr PC1602LRS-JWA-B-Q Tf Page7 SAMPLE Ver.01 SPEC Edi.002 Electrical characteristics-2 ※ 2 D rive w aveform V op: D rive voltage 1/B : B ias N : D uty fF: Fram e frequency fD : D rive frequency (1) Selected w aveform 1 2 3 N 1 3 2 V V op/B V op/B V 1/fD 1/fF (2) N on- Selected w aveform 1 2 3 N 1 2 3 (1-2/B )V op V op/B V op/B (1-2/B )V op 1/fF 1/fD N ote: Fram e frequency is defined as follow s: C om m on side supply voltage peak - to - peak /2 = 1 period PC1602LRS-JWA-B-Q Page8 SAMPLE Ver.01 SPEC Edi.002 N ote 3. : D efinition of V th Selected w aveform 100 73% Transm ittanc N o selected w aveform 50% V th1 V th2 D rive A ctive voltage range V iew direction D rive w aveform Transm ittance V th1 10 ° (Selected w aveform ) 50% V th2 40 ° (N o selected w aveform ) 73% ※ 1 C ontrast ratio = (Brightness in O FF state) / (Brightness in O N state) O utline of Electro-O ptical C haracteristics M easuring System Photo D etector θ H um an A ctive Tem peratur e C ontrol C ham ber ψ 正讀 LC D Panel Transm issive M easuring System : A utronic D M S-803 PC1602LRS-JWA-B-Q Page9 SAMPLE Ver.01 SPEC Edi.002 1.6 Backlight Characteristics LCD Module with LED Backlight Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 275 mA Reverse Voltage VR Ta =25℃ - 8 V Power Dissipation PO Ta =25℃ - 1.21 W Operating Temperature TOP - -20 70 ℃ Storage Temperature TST - -40 80 ℃ Solder Temp.for 3 Second - - - 260 ℃ Electrical / Optical Characteristics Ta =25℃ Max. Unit Item Symbol Conditions Min. Typ. Forward Voltage VF IF= 110A - 4.0 4.4 V Reverse Current IR VR= 8V - - 0.2 mA Average Brightness (Without LCD) IV IF= 110mA 144 180 - cd/m2 Wavelength Λp IF= 110mA 571 - 576 nm Color PC1602LRS-JWA-B-Q Yellow-green Page10 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PC1602LRS-JWA-B-Q Page11 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description Pin No. Symbol 1 VDD Power Supply (VDD>VSS) 2 VSS Power Supply (VSS=0) 3 VO Operating voltage for LCD (variable) RS Register Selection input High = Data register Low = Instruction register (for write) Busy flag address counter (for read) 5 R/W Read/Write signal input is used to select the read/write mode High = Read mode, Low = Write mode 6 E 4 7~10 11~14 DB0 ~ DB3 DB4 ~ DB7 Signal Description Start enable signal to read or write the data Four low order bi-directional three-state data bus lines. Use for data transfer between the MPU and the LCD module. These four are not used during 4-bit operation. Four high order bi-directional three-state data bus lines. Used for data transfer between the MPU and the LCD module. DB7 can be used as a busy flag. 2.2.1 Application Notes Contrast Adjust VDD 1 VO 10~20KΩ 3 LCD MODULE VSS 2 K A 4.0 V PC1602LRS-JWA-B-Q Page12 SAMPLE Ver.01 SPEC Edi.002 2.2.2 Refer Initial Code delay(40); write_com(0x01); //;Clear Display delay(5); write_com(0x38); //;Set 8bits 2lines 5X8 Dots delay(5); write_com(0x0c); //;Set Display On delay(5); write_com(0x06); //;Set Cursor Display Shift delay(5); PC1602LRS-JWA-B-Q Page13 SAMPLE Ver.01 SPEC Edi.002 2.3 Timing Characteristics PC1602LRS-JWA-B-Q Page14 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page15 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page16 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page17 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page18 SAMPLE Ver.01 SPEC Edi.002 2.5 Character Pattern PC1602LRS-JWA-B-Q Page19 SAMPLE Ver.01 SPEC Edi.002 2.6 JUMPER（Setting different use） SHORT: J3/J5 OPEN: the others PC1602LRS-JWA-B-Q Page20 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PC1602LRS-JWA-B-Q run & Reliability test Inspection NG Shipment Ship out Page21 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PC1602LRS-JWA-B-Q 2. Process improvement proposal 4. Education And Training Activities Page22 SAMPLE Ver.01 SPEC Edi.002 3.2 Inspection Specification PC1602LRS-JWA-B-Q Page23 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page24 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page25 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page26 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page27 SAMPLE Ver.01 SPEC Edi.002 PC1602LRS-JWA-B-Q Page28 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test (Ver.B01) TEST CONDITION Keep in 70℃ ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -20℃ ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in 40℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -20℃ → +25℃ → 70℃ → +25℃ (30mins) (5mins) (30mins) 10 Cycle (5mins) Surrounding temperature, then storage at normal condition 4hrs. 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PC1602LRS-JWA-B-Q Page29 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PC1602LRS-JWA-B-Q Page30 SAMPLE Ver.01 SPEC Edi.002