TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH240320T-063-L-Q MASS PRODUCTION CODE : PH240320T-063-L-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 003 DRAWING NO. (Ver.) : LMD-PH240320T-063-L-Q (Ver:001) PACKAGING NO. (Ver.) : PKG-PH240320T-063-L-Q (Ver:001) Customer Approved Date: Approved Checked Designer Rex Liao Rex Liao Yuan Chang Preliminary specification for design input Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 407 六路 8 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 2012/08/06 01 001 New Drawing - Yuan 2012/11/01 01 002 New Sample - Yuan 2013/07/08 01 003 Modify Optical Characteristics 6 Yuan Total: 28 Page PH240320T-063-L-Q Page2 SAMPLE Ver.01 SPEC Edi.003 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Reference Initial code 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix LCM Drawing LCM Packaging Specifications Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): ILITEK: ILI9341 PH240320T-063-L-Q Page3 SAMPLE Ver.01 SPEC Edi.003 1. SPECIFICATIONS 1.1 Features Main LCD panel Item Standard Value 240(R G Display Type 1.2 B) * 320 Dots LCD Type Normally white , Transmissive type Screen size(inch) 2.8 inch Viewing Direction 12 O’clock Color configuration RGB-Strip Backlight LED Backlight Interface 16-bit 80-system I/F Other(controller/driver IC) ILITEK: ILI9341 ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer website : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 50.0(W) * 69.2 (L) * 3.05 (H)max mm Item Standard Value Unit Active Area 43.2 (W) * 57.6 (L) mm LCD panel PH240320T-063-L-Q Page4 SAMPLE Ver.01 SPEC Edi.003 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit VCC - -0.3 +4.6 V VGH ~ VGL - -0.3 +32 V Input Voltage VIN - -0.3 VCC+0.3 V Operating Temperature TOP - -20 +70 °C Storage Temperature TST - -30 +80 °C Storage Humidity HD 20 90 %RH System Power Supply Voltage 1.4 Ta 40 °C DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage1 VCC - - 2.8 - V Input High Voltage VIH - 0.7 VCC - VCC V Input Low Voltage VIL - GND - 0.3 VCC V Output High Voltage VOH IOH=-0.1mA 0.8*VDD - VDD V Output Low Voltage VOL IOL=0.1mA GND - 0.2*VDD V - 9 12 mA VCC = 2.8V Supply Current ICC Pattern=full display *1 Note1:Maximum current display PH240320T-063-L-Q Page5 SAMPLE Ver.01 SPEC Edi.003 1.5 Optical Characteristics VCC = 2.8V, Ta=25°C TFT LCD Module Item Symbol Condition Min. Typ. Max. unit - Response time Tr+ Tf Ta = 25°C θX, θY = 0° - 31 47 ms Note2 θY+ θYθXθX+ CR ≥ 10 - 50 50 50 50 - CR Ta = 25°C θX , θY = 0° 500 600 - - X Y X Y X Y X Y - 0.25 0.28 0.58 0.3 0.29 0.56 0.09 0.02 0.30 0.33 0.63 0.35 0.34 0.61 0.14 0.07 0.35 0.38 0.68 0.4 0.39 0.66 0.19 0.12 - IV IF=80 mA 230 255 - cd/m2 IF=80 mA 70 - - % Top Bottom Left Right Viewing angle Contrast ratio White Red Color of CIE Coordinate With B/L Green Blue Average Brightness Pattern=white display (With B/L) *1 Uniformity (With B/L)*2 B Deg. Note4 Note3 Note1 Note 1: *1 B=B(min) / B(max) * 100% *2 Measurement Condition for Optical Characteristics: a Environment: 25 ±5 / 60 20%R.H no wind dark room below 10 Lux at typical lamp current and typical operating frequency. b Measurement Distance: 500 ± 50 (θ= 0°) c Equipment: TOPCON BM-7 fast (field 1 ) after 10 minutes operation. d The uncertainty of the C.I.E coordinate measurement ±0.01 Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 500 9 LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon PH240320T-063-L-Q Page6 SAMPLE Ver.01 SPEC Edi.003 luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: PH240320T-063-L-Q Page7 SAMPLE Ver.01 SPEC Edi.003 1.6 Backlight Characteristics Maximum Ratings Item Symbol Power Dissipation PD Conditions Min. Ta =25 Max. Unit 0.288 W Electrical / Optical Characteristics Item Symbol Forward Voltage VF 2.8 Average Brightness (without LCD) IV 5000 5500 X 0.26 0.28 0.33 Y 0.26 0.28 0.33 CIE Color Coordinate (Without LCD) Conditions IF= 80 mA Color Min. Typ. Max. Unit 3.6 V cd/m2 - White LED-K1 LED-K2 LED-A LED-K3 LED-K4 PH240320T-063-L-Q Page8 SAMPLE Ver.01 SPEC Edi.003 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram TFT LCD PANEL LED Backlight Source Driver T -con Gate Driver LIL9341 PIN1 ----------------------------------------------------------- PIN PH240320T-063-L-Q Page9 SAMPLE Ver.01 SPEC Edi.003 2.2 Interface Pin Description Pin No. 1 Symbol Function LEDK1-4 Power supply for LED Backlight Cathode input 2 LEDA Power supply for LED Backlight Anode input 3 GND Signal ground.(0V) 4 RESET 5 DB17 6 DB16 7 DB15 8 DB14 9 DB13 10 DB12 11 DB11 12 DB10 13 DB8 14 DB7 15 DB6 16 DB5 17 DB4 18 DB3 19 DB2 20 DB1 21 RD 22 Reset input pin for TFT LCD. When RESET is “L”, initialization is executed. Bi-directional data bus Read signal input active at Low. WR/SCL Write signal input active at Low. 23 RS When RS = 0: Command. 24 CS Chip select signal , Active at ”L” 25 XR/X+ PH240320T-063-L-Q When RS = 1: Display data. NC Page10 SAMPLE Ver.01 SPEC Edi.003 Pin No. Symbol 26 YD/Y- 27 XL/X- 28 YU/Y+ 29 GND 30 Function NC Signal ground.(0V) 2.8 /VCC Power supply for the internal logic circuit. PH240320T-063-L-Q Page11 SAMPLE Ver.01 SPEC Edi.003 2.3 Timing Characteristics RS /CS /WR DB[17:0] (Write) /RD DB[17:0] (Read) RS /CS /WR /RD(FM) /RD(ID) DB[17:0] DB[17:0] DB[8:0] DB[7:0] Note: Ta = -30 to 70 °C, VCC=1.65V to 3.3V, VCI=2.5V to 3.3V, GND=0V PH240320T-063-L-Q Page12 SAMPLE Ver.01 SPEC Edi.003 Reset Timing RESET PH240320T-063-L-Q Page13 SAMPLE Ver.01 SPEC Edi.003 2.4 Reference Initial code MOV MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#CBH WRITE_COMMAND ADDRL,#39H WRITE_DATA ADDRL,#2CH WRITE_DATA ADDRL,#00H WRITE_DATA ADDRL,#34H WRITE_DATA ADDRL,#02H WRITE_DATA MOV CALL MOV CALL MOV CALL MOV CALL ADDRL,#CFH WRITE_COMMAND ADDRL,#00H WRITE_DATA ADDRL,#C1H WRITE_DATA ADDRL,#30H WRITE_DATA MOV CALL MOV CALL MOV CALL MOV CALL MOV MOV CALL MOV CALL MOV CALL ADDRL,#E8H WRITE_COMMAND ADDRL,#85H WRITE_DATA ADDRL,#00H WRITE_DATA ADDRL,#78H WRITE_DATA ADDRH,#00H ADDRL,#EAH WRITE_COMMAND ADDRL,#00H WRITE_DATA ADDRL,#00H WRITE_DATA MOV MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#EDH WRITE_COMMAND ADDRL,#64H WRITE_DATA ADDRL,#03H WRITE_DATA ADDRL,#12H WRITE_DATA ADDRL,#81H WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#F7H WRITE_COMMAND ADDRL,#20H WRITE_DATA PH240320T-063-L-Q Page14 SAMPLE Ver.01 SPEC Edi.003 MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#C0H WRITE_COMMAND ADDRL,#23H WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#C1H WRITE_COMMAND ADDRL,#10H WRITE_DATA MOV MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#C5H WRITE_COMMAND ADDRL,#2BH WRITE_DATA ADDRL,#2BH WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#C7H WRITE_COMMAND ADDRL,#C0H WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#36H WRITE_COMMAND ADDRL,#40H WRITE_DATA MOV MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#B1H WRITE_COMMAND ADDRL,#00H WRITE_DATA ADDRL,#1BH WRITE_DATA MOV MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#B6H WRITE_COMMAND ADDRL,#0AH WRITE_DATA ADDRL,#02H WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#F2H WRITE_COMMAND ADDRL,#00H WRITE_DATA MOV MOV CALL MOV ADDRH,#00H ADDRL,#26H WRITE_COMMAND ADDRL,#01H PH240320T-063-L-Q Page15 SAMPLE Ver.01 SPEC Edi.003 CALL WRITE_DATA MOV MOV CALL MOV CALL ADDRH,#00H ADDRL,#3AH WRITE_COMMAND ADDRL,#55H WRITE_DATA MOV MOV CALL ADDRH,#00H ADDRL,#21H WRITE_COMMAND MOV MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL ADDRH,#00H ADDRL,#E0H WRITE_COMMAND ADDRL,#0FH WRITE_DATA ADDRL,#31H WRITE_DATA ADDRL,#2BH WRITE_DATA ADDRL,#0CH WRITE_DATA ADDRL,#0EH WRITE_DATA ADDRL,#08H WRITE_DATA ADDRL,#4EH WRITE_DATA ADDRL,#F1H WRITE_DATA ADDRL,#37H WRITE_DATA ADDRL,#07H WRITE_DATA ADDRL,#10H WRITE_DATA ADDRL,#03H WRITE_DATA ADDRL,#0EH WRITE_DATA ADDRL,#09H WRITE_DATA ADDRL,#00H WRITE_DATA MOV MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV ADDRH,#00H ADDRL,#E1H WRITE_COMMAND ADDRL,#00H WRITE_DATA ADDRL,#0EH WRITE_DATA ADDRL,#14H WRITE_DATA ADDRL,#03H WRITE_DATA ADDRL,#11H PH240320T-063-L-Q Page16 SAMPLE Ver.01 SPEC Edi.003 CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL MOV CALL WRITE_DATA ADDRL,#07H WRITE_DATA ADDRL,#31H WRITE_DATA ADDRL,#C1H WRITE_DATA ADDRL,#48H WRITE_DATA ADDRL,#08H WRITE_DATA ADDRL,#0FH WRITE_DATA ADDRL,#0CH WRITE_DATA ADDRL,#31H WRITE_DATA ADDRL,#36H WRITE_DATA ADDRL,#0FH WRITE_DATA MOV MOV CALL ADDRH,#00H ADDRL,#11H WRITE_COMMAND CALL CALL CALL CALL DELAY DELAY DELAY DELAY MOV MOV CALL ADDRH,#00H ADDRL,#29H WRITE_COMMAND PH240320T-063-L-Q Page17 SAMPLE Ver.01 SPEC Edi.003 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH240320T-063-L-Q run & Reliability test Inspection NG Shipment Ship out Page18 SAMPLE Ver.01 SPEC Edi.003 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH240320T-063-L-Q Page19 2. Process improvement proposal 4. Education And Training Activities SAMPLE Ver.01 SPEC Edi.003 3.2 Inspection Specification PH240320T-063-L-Q Page20 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page21 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page22 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page23 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page24 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page25 SAMPLE Ver.01 SPEC Edi.003 PH240320T-063-L-Q Page26 SAMPLE Ver.01 SPEC Edi.003 4. RELIABILITY TEST (Ver.B01) Reliability Test Condition NO. TEST ITEM High Temperature Storage Test Low Temperature Storage Test High Temperature / High Humidity Storage Test Temperature Cycling Storage Test ESD Test Vibration Test (Packaged) TEST CONDITION Keep in hrs Surrounding temperature, then storage at normal condition hrs. Keep in hrs Surrounding temperature, then storage at normal condition hrs. Keep in / % R.H duration for hrs Surrounding temperature, then storage at normal condition hrs. (Excluding the polarizer) ( mins) ( mins) ( mins) ( mins) Cycle Surrounding temperature, then storage at normal condition hrs. Air Discharge: Contact Discharge: Apply KV with times Apply V with times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 2. Humidity relative : % % 3. Energy Storage Capacitance(Cs+Cd) : pF % 4. Discharge Resistance(Rd) : % 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : %) 1. Sine wave Hz frequency ( min/sweep) 2. The amplitude of vibration : mm 3. Each direction (X Y Z) duration for Hrs Packing Weight (Kg) Drop Height (cm) Drop Test (Packaged) Drop Direction : PH240320T-063-L-Q Page27 1 corner / edges / sides each time SAMPLE Ver.01 SPEC Edi.003 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 10 and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH240320T-063-L-Q Page28 SAMPLE Ver.01 SPEC Edi.003