PH240320T-063-L04Q

TECH. CORP.
SPECIFICATIONS
CUSTOMER
:
PTC
SAMPLE
CODE
:
SH240320T-063-L04Q
MASS PRODUCTION CODE
:
PH240320T-063-L04Q
SAMPLE VERSION
:
02
SPECIFICATIONS EDITION
:
003
DRAWING NO.
(Ver.)
:
LMD-PH240320T-063-L04Q (Ver:002)
PACKAGING NO.
(Ver.)
:
PKG-PH240320T-063-L04Q (Ver:001)
Customer Approved
Date:
Approved
Checked
Designer
廖志豪
廖志豪
張慶源
Rex Liao
Rex Liao
Yuan Chang
POWERTIP
2013.01.17
□
Preliminary specification for design input
■
Specification for sample approval
TW RD APR
POWERTIP TECH. CORP.
Headquarters:
th
No.8, 6 Road, Taichung Industrial Park,
TEL: 886-4-2355-8168
E-mail: [email protected]
FAX: 886-4-2355-8166
Http://www.powertip.com.tw
Taichung, Taiwan
台中市 407 工業區六路 8 號
NO.PT-A-005-8
History of Version
Date
(mm / dd / yyyy)
Ver. Edi.
Description
Page
Design by
2012/08/30
01
001
New Drawing
-
Yuan
2012/12/07
01
002
New Sample
-
Yuan
2013/01/11
02
003
ADD Frame
Appendix
Yuan
Total: 34 Page
PH240320T-063-L04Q
Page2
SAMPLE Ver.02
SPEC Edi.003
Contents
1. SPECIFICATIONS
1.1
1.2
1.3
1.4
1.5
1.6
1.7
Features
Mechanical Specifications
Absolute Maximum Ratings
DC Electrical Characteristics
Optical Characteristics
Backlight Characteristics
Touch Panel Characteristics
2. MODULE STRUCTURE
2.1 Counter Drawing
2.2 Interface Pin Description
2.3 Timing Characteristics
2.4 Reference Initial code
3. QUALITY ASSURANCE SYSTEM
3.1
3.2
Quality Assurance Flow Chart
Inspection Specification
4. RELIABILITY TEST
4.1
Reliability Test Condition
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 Safety
5.2 Handling
5.3 Storage
5.4 Terms of Warranty
Appendix：LCM Drawing
LCM Packaging Specification
Note : For detailed information please refer to IC data sheet :
Primacy(TFT LCD): ILITEK: ILI9341
PH240320T-063-L04Q
Page3
SAMPLE Ver.02
SPEC Edi.003
1. SPECIFICATIONS
1.1
Features
Main LCD panel
1.2
Item
Standard Value
Display Type
240(R、G、B) * 320 Dots
LCD Type
Normally white , Transmissive type
Screen size(inch)
2.8 inch
Viewing Direction
12 O’clock
Color configuration
RGB-Strip
Backlight
LED Backlight
Interface
8/16-bit 80-system I/F
Other(controller/driver IC)
ILITEK: ILI9341
ROHS
THIS PRODUCT CONFORMS THE ROHS OF PTC
Detail information please refer web side :
http://www.powertip.com.tw/news.php?area_id_view=1085560481/
Mechanical Specifications
Item
Standard Value
Unit
Outline Dimension
50.0(W) * 69.2 (L) * 4.25 max (H)
mm
Item
Standard Value
Unit
Active Area
43.2 (W) * 57.6 (L)
mm
LCD panel
PH240320T-063-L04Q
Page4
SAMPLE Ver.02
SPEC Edi.003
1.3
Absolute Maximum Ratings
Module
Item
Symbol
Condition
Min.
Max.
Unit
VCC
-
-0.3
+4.6
V
VGH ~ VGL
-
-0.3
+32
V
Input Voltage
VIN
-
-0.3
VCC+0.3
V
Operating Temperature
TOP
-
-20
+70
°C
Storage Temperature
TST
-
-30
+80
°C
Storage Humidity
HD
Ta ≦ 40 °C
20
90
%RH
System Power Supply Voltage
1.4
DC Electrical Characteristics
Module
GND = 0V, Ta = 25°C
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Power Supply Voltage1
VCC
-
-
2.8
-
V
Input High Voltage
VIH
-
0.7 VCC
-
VCC
V
Input Low Voltage
VIL
-
GND
-
0.3 VCC
V
Output High Voltage
VOH
IOH=-0.1mA
0.8*VDD
-
VDD
V
Output Low Voltage
VOL
IOL=0.1mA
GND
-
0.2*VDD
V
-
9
12
mA
VCC = 2.8V
Supply Current
ICC
Pattern=full display
*1
Note1:Maximum current display
PH240320T-063-L04Q
Page5
SAMPLE Ver.02
SPEC Edi.003
1.5
Optical Characteristics
TFT LCD Module
VCC = 2.8V, Ta=25°C
Item
Symbol
Condition
Min.
Typ.
Max.
unit
-
Response time
Tr+ Tf
Ta = 25°C
θX, θY = 0°
-
31
47
ms
Note2
θY+
θYθXθX+
-
45
50
50
50
-
-
CR
Ta = 25°C
θX , θY = 0°
200
250
-
-
X
Y
X
Y
X
Y
X
Y
-
0.26
0.28
0.58
0.3
0.29
0.56
0.09
0.02
0.31
0.33
0.63
0.35
0.34
0.61
0.14
0.07
0.36
0.38
0.68
0.4
0.39
0.66
0.19
0.12
-
Average Brightness
Pattern=white display
(With B/L&T/P) *1
IV
IF=80 mA
180
200
-
cd/m2
Uniformity
(With B/L&T/P)*2
△B
IF=80 mA
70
-
-
%
Top
Bottom
Left
Right
Viewing angle
Contrast ratio
White
Red
Color of CIE
Coordinate
（With B/L&T/P） Green
Blue
Deg. Note4
Note3
Note1
Note 1:
*1：△B=B(min) / B(max) * 100%
*2：Measurement Condition for Optical Characteristics:
a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp
current and typical operating frequency.
b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°)
c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation.
d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4%
1
2
3
VIEW AREA
6
5
4
7
8
θθ
9
500 ㎜
LCM
Colorimeter=BM-7 fast
To be measured at the center area of panel with a viewing cone of 1° by Topcon
luminance meter BM-7, after 10 minutes operation (module)
PH240320T-063-L04Q
Page6
SAMPLE Ver.02
SPEC Edi.003
Note2: Definition of response time:
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
Amplitudes.
Refer to figure as below:
"White"
"Black"
"White"
Signal (Relative value)
100%
90%
10%
0%
Tr
Tf
Note3: Definition of contrast ratio:
Contrast ratio is calculated with the following formula
Photo detector output when LCD is at “White” state
Contrast ratio (CR) =
Photo detector output when LCD is at “Black” state
Note4: Definition of viewing angle:
Refer to figure as below:
θX = θY = 0 °
12H
Φ = 180 °
Φ = 270 °
θY -
θY +
θY + = 9 0 °
θX - = 9 0 °
Y+
X-
θX θX +
Φ= 90 °
Φ
X+
Y6 H
Φ= 0 °
θY - = 9 0 °
PH240320T-063-L04Q
θX + = 9 0 °
Page7
SAMPLE Ver.02
SPEC Edi.003
1.6
Backlight Characteristics
Maximum Ratings
Item
Symbol
Conditions
Min.
Max.
Unit
Power Dissipation
PD
Ta =25℃
－
0.288
W
Electrical / Optical Characteristics
Item
Symbol
Forward Voltage
Average Brightness
(without LCD)
CIE Color Coordinate
(Without LCD)
Conditions
Min.
Typ.
Max.
Unit
VF
2.8
－
3.6
V
IV
5000
5500
－
cd/m2
X
0.26
0.28
0.33
Y
0.26
0.28
0.33
IF= 80 mA
Color
-
White
LED-K1
LED-K2
LED-A
LED-K3
LED-K4
PH240320T-063-L04Q
Page8
SAMPLE Ver.02
SPEC Edi.003
1.7 Touch Panel Characteristics
1.7.1 General Standard Specification
Item
Specification
Input Method
Finger of stylus pen
ITO Glass
T=0.7mm,400Ω/□ ±100Ω , Non-Antiglare
ITO Film
T=0.18mm,400Ω/□ ±100Ω Clear Type
Operating Temperature Range
-20℃~70℃,20~85%RH(Except for dew gathering).
Storage Temperature Range
-30℃~85℃,10~90%RH (Except for dew gathering).
Surface Hardness
3H-prressure 500gf,45deg.
Hitting Durability
1,000,000times min.(Tip R 8 mm&R0.8mm).
Pen Sliding Durability
100,000 times min(Tip R0.8mm).
Insulation Impedance
DC25V 1min,20MΩ↑.
Light Transparency
80%min
Linearity
172g ±1.5%(±1.5%After environmental and life test)
Linearity Force
80gf less input with stylus pen (R0.8mm)
Activation Force
50gf(Typical 20gf)less individual point on with stylus pen R0.8mm
Bouncing
<10ms
Impact Resistance
Flexible pattern Heat Seal
Peeling Strength
No damage when ψ9mm steel ball is dropped on the surface from 30 cm
height at 1 time.
500gf/cm (peeling upward by 90deg)
Flexible pattern Bending
Bending 3 times by bending radius R1.0 mm The requirements
Resistance
in4-2shall be satisfied
Flexible Pattern Insert/Pull
Out Resistance
5times at least .The requirements in 4-2shall be satisfied.
Not in operation :The requirements in 3 to 4 shall be satisfied after
Vibration Resistance
sweep vibration of 2G15~55Hz(1min) is given for 30 min ,each in the
directions of X,Y,Z.
Package Drop
No damage to the product.(1 corner edge,2ridges,4 surfaces ,drop from
50 cm height).
After 4.5Kg load for 1 min is
Applied to the center area
Static load resistance
(25C ㎡)of the Touch
panel ,the requirements in 3
and 4,shall be satisfied.
PH240320T-063-L04Q
Page9
SAMPLE Ver.02
SPEC Edi.003
1.7.2
Touch Panel
Optical & Electrical Characteristics
Test by light measure device and the result should be 80%min.
(A) Insulation Resistance.
20 MΩ or more (DC 25Ⅴ 1min)
(B)
Resistance Between Terminals.
Direction X (Glass side): 100Ω~ 500Ω
Direction Y (Film side): 350Ω~ 850Ω
(C) Linearity.
± 1.5% Measuring method, Linearity(%)= ΔV/（EV-SV）*100
± 1.5%(after environmental and life test)
ΔV: The difference between the ideal voltage and measured voltage on the each
measuring line.
SV: Voltage of starting Points
EV: Voltage of Ending Points
(D)
Operating Voltage.
5V DC.
Max Voltage : 7V DC.
(E)
Bouncing
<10ms
Tip R 3.75mm, hardness 10°~20° ,silicon rubber ,500gf operation : 40 mm/sec.
PH240320T-063-L04Q
Page10
SAMPLE Ver.02
SPEC Edi.003
1.7.3
Touch Panel Design/Handing Guide
(1) Keep the gap, for example 0.3 to 0.7mm, between bezel edge and T/P surface.
The reason is to avoid the bezel edge from contacting T/P surface that may cause “short” with
bottom layer
(2) Insertion a cushion material is recommended.
(3) The cushion material should be limited on the busbar insulation paste area. If it is over the
transparent insulation paste area, a “short” may be occurred.
(4) Do not to use an adhesive tape to bond it on the front of T/P and hang it to the housing bezel.
(5) Never expand the T/P top layer (PET Film) like a balloon by internal air pressure. The life of the T/P
will extremely decreasing.
(6) Top layer, PET, dimension is changing base on environment temperature and humidity. Please
avoid a stress from housing bezel to top layer, because it may cause “waving”.
(7) The input to the Touch Panel sometimes distorts touch panel itself.
(8)To use the stylus pen or fingernail sliding at the edge of the housing is prohibited. It would cause
the cracking of the ITO coating and damage the touch panel. It also request not to press this area
while assembling
(9) Purpose: In order to prevent accidental use and performance deterioration, please keep the
following precautions.
PH240320T-063-L04Q
Page11
SAMPLE Ver.02
SPEC Edi.003
In order to prevent unusual performance degradation and malfunction of a touch panel, please carry
out the set case designing and a touch panel assembling method after surely considering the
definition of each area illustrated in above figure.
Area(a)：Active area
The active area is guaranteed the position data detectable precision, operation force and other
operations. it is strongly recommended to place the operation button or menu keys within the active
area. Due to structure, the active area is less durable at the edge or close to the edge.
Area(b)：Operation non-guaranteed area
This area does not guarantee a touch panel operation and its function. When this area is pressed,
touch panel shows degradation of its performance and durability such as a pen sliding durability
becomes about one-tenth compared with the active area (area-(a) as guaranteed area) and its
operation force requires about double. About 0.5 mm outside from a boundary of the active area
corresponds to this area.
Area(c)：Pressing prohibition area
The area which forbids pressing, because an excessive load is applied to a transparent electrode (ITO)
and a serious damage is given to a touch panel function by pressing.
Area(d)：Non-Active area
The area does not activate even if pressed.
PH240320T-063-L04Q
Page12
SAMPLE Ver.02
SPEC Edi.003
1.7.3 Touch Panel Design/Handing Guide
(1) Keep the gap, for example 0.3 to 0.7mm, between bezel edge and T/P surface.
The reason is to avoid the bezel edge from contacting T/P surface that may cause “short” with
bottom layer
(2) Insertion a cushion material is recommended.
(3) The cushion material should be limited on the busbar insulation paste area. If it is over the
transparent insulation paste area, a “short” may be occurred.
(4) Do not to use an adhesive tape to bond it on the front of T/P and hang it to the housing bezel.
(5) Never expand the T/P top layer (PET Film) like a balloon by internal air pressure. The life of the T/P
will extremely decreasing.
(6) Top layer, PET, dimension is changing base on environment temperature and humidity. Please
avoid a stress from housing bezel to top layer, because it may cause “waving”.
(7) The input to the Touch Panel sometimes distorts touch panel itself.
(8)To use the stylus pen or fingernail sliding at the edge of the housing is prohibited. It would cause
the cracking of the ITO coating and damage the touch panel. It also request not to press this area
while assembling
(9) Purpose: In order to prevent accidental use and performance deterioration, please keep the
following precautions.
PH240320T-063-L04Q
Page13
SAMPLE Ver.02
SPEC Edi.003
In order to prevent unusual performance degradation and malfunction of a touch panel, please carry
out the set case designing and a touch panel assembling method after surely considering the
definition of each area illustrated in above figure.
Area(a)：Active area
The active area is guaranteed the position data detectable precision, operation force and other
operations. it is strongly recommended to place the operation button or menu keys within the active
area. Due to structure, the active area is less durable at the edge or close to the edge.
Area(b)：Operation non-guaranteed area
This area does not guarantee a touch panel operation and its function. When this area is pressed,
touch panel shows degradation of its performance and durability such as a pen sliding durability
becomes about one-tenth compared with the active area (area-(a) as guaranteed area) and its
operation force requires about double. About 0.5 mm outside from a boundary of the active area
corresponds to this area.
Area(c)：Pressing prohibition area
The area which forbids pressing, because an excessive load is applied to a transparent electrode (ITO)
and a serious damage is given to a touch panel function by pressing.
Area(d)：Non-Active area
The area does not activate even if pressed.
PH240320T-063-L04Q
Page14
SAMPLE Ver.02
SPEC Edi.003
2.1
Counter Drawing
2.1.1
LCM Mechanical Diagram
* See Appendix
2.1.2
Block Diagram
TP
TFT LCD PANEL
LED
Backlight
Source Driver
T -con
Gate Driver
LIL9341
Detail information please refer interface description
PIN1 ----------------------------------------------------------- PIN３０
PH240320T-063-L04Q
Page15
SAMPLE Ver.02
SPEC Edi.003
2.2
Interface Pin Description
Pin No.
1
Symbol
Function
LEDK1-4 Power supply for LED Backlight Cathode input
2
LEDA
Power supply for LED Backlight Anode input
3
GND
Signal ground.(0V)
4
RESET
5
DB17
6
DB16
7
DB15
8
DB14
9
DB13
10
DB12
11
DB11
12
DB10
13
DB8
14
DB7
15
DB6
16
DB5
17
DB4
18
DB3
19
DB2
20
DB1
21
RD
22
Reset input pin for TFT LCD.
When RESET is “L”, initialization is executed.
Bi-directional data bus
Read signal input，active at Low.
WR/SCL Write signal input，active at Low.
23
RS
When RS = 0: Command.
24
CS
Chip select signal , Active at ”L”
25
XR/X+
PH240320T-063-L04Q
When RS = 1: Display data.
Right side of touch panel.
Page16
SAMPLE Ver.02
SPEC Edi.003
Pin No.
Symbol
26
YD/Y-
Bottom side of touch panel.
27
XL/X-
Left side of touch panel.
28
YU/Y+
Up side of touch panel.
29
GND
30
Function
Signal ground.(0V)
2.8 /VCC Power supply for the internal logic circuit.
PH240320T-063-L04Q
Page17
SAMPLE Ver.02
SPEC Edi.003
2.3 Timing Characteristics
RS
/CS
/WR
DB[17:0]
(Write)
/RD
DB[17:0]
(Read)
RS
/CS
/WR
/RD(FM)
/RD(ID)
DB[17:0]
DB[17:0]
DB[8:0]
DB[7:0]
Note: Ta = -30 to 70 °C, VCC=1.65V to 3.3V, VCI=2.5V to 3.3V, GND=0V
PH240320T-063-L04Q
Page18
SAMPLE Ver.02
SPEC Edi.003
Reset Timing
RESET
PH240320T-063-L04Q
Page19
SAMPLE Ver.02
SPEC Edi.003
2.4 Reference Initial code
MOV
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#CBH
WRITE_COMMAND
ADDRL,#39H
WRITE_DATA
ADDRL,#2CH
WRITE_DATA
ADDRL,#00H
WRITE_DATA
ADDRL,#34H
WRITE_DATA
ADDRL,#02H
WRITE_DATA
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
ADDRL,#CFH
WRITE_COMMAND
ADDRL,#00H
WRITE_DATA
ADDRL,#C1H
WRITE_DATA
ADDRL,#30H
WRITE_DATA
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
MOV
CALL
MOV
CALL
MOV
CALL
ADDRL,#E8H
WRITE_COMMAND
ADDRL,#85H
WRITE_DATA
ADDRL,#00H
WRITE_DATA
ADDRL,#78H
WRITE_DATA
ADDRH,#00H
ADDRL,#EAH
WRITE_COMMAND
ADDRL,#00H
WRITE_DATA
ADDRL,#00H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#EDH
WRITE_COMMAND
ADDRL,#64H
WRITE_DATA
ADDRL,#03H
WRITE_DATA
ADDRL,#12H
WRITE_DATA
ADDRL,#81H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#F7H
WRITE_COMMAND
ADDRL,#20H
WRITE_DATA
PH240320T-063-L04Q
Page20
SAMPLE Ver.02
SPEC Edi.003
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#C0H
WRITE_COMMAND
ADDRL,#23H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#C1H
WRITE_COMMAND
ADDRL,#10H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#C5H
WRITE_COMMAND
ADDRL,#2BH
WRITE_DATA
ADDRL,#2BH
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#C7H
WRITE_COMMAND
ADDRL,#C0H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#36H
WRITE_COMMAND
ADDRL,#40H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#B1H
WRITE_COMMAND
ADDRL,#00H
WRITE_DATA
ADDRL,#1BH
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#B6H
WRITE_COMMAND
ADDRL,#0AH
WRITE_DATA
ADDRL,#02H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#F2H
WRITE_COMMAND
ADDRL,#00H
WRITE_DATA
MOV
MOV
CALL
MOV
ADDRH,#00H
ADDRL,#26H
WRITE_COMMAND
ADDRL,#01H
PH240320T-063-L04Q
Page21
SAMPLE Ver.02
SPEC Edi.003
CALL
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#3AH
WRITE_COMMAND
ADDRL,#55H
WRITE_DATA
MOV
MOV
CALL
ADDRH,#00H
ADDRL,#21H
WRITE_COMMAND
MOV
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
ADDRH,#00H
ADDRL,#E0H
WRITE_COMMAND
ADDRL,#0FH
WRITE_DATA
ADDRL,#31H
WRITE_DATA
ADDRL,#2BH
WRITE_DATA
ADDRL,#0CH
WRITE_DATA
ADDRL,#0EH
WRITE_DATA
ADDRL,#08H
WRITE_DATA
ADDRL,#4EH
WRITE_DATA
ADDRL,#F1H
WRITE_DATA
ADDRL,#37H
WRITE_DATA
ADDRL,#07H
WRITE_DATA
ADDRL,#10H
WRITE_DATA
ADDRL,#03H
WRITE_DATA
ADDRL,#0EH
WRITE_DATA
ADDRL,#09H
WRITE_DATA
ADDRL,#00H
WRITE_DATA
MOV
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
ADDRH,#00H
ADDRL,#E1H
WRITE_COMMAND
ADDRL,#00H
WRITE_DATA
ADDRL,#0EH
WRITE_DATA
ADDRL,#14H
WRITE_DATA
ADDRL,#03H
WRITE_DATA
ADDRL,#11H
PH240320T-063-L04Q
Page22
SAMPLE Ver.02
SPEC Edi.003
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
MOV
CALL
WRITE_DATA
ADDRL,#07H
WRITE_DATA
ADDRL,#31H
WRITE_DATA
ADDRL,#C1H
WRITE_DATA
ADDRL,#48H
WRITE_DATA
ADDRL,#08H
WRITE_DATA
ADDRL,#0FH
WRITE_DATA
ADDRL,#0CH
WRITE_DATA
ADDRL,#31H
WRITE_DATA
ADDRL,#36H
WRITE_DATA
ADDRL,#0FH
WRITE_DATA
MOV
MOV
CALL
ADDRH,#00H
ADDRL,#11H
WRITE_COMMAND
CALL
CALL
CALL
CALL
DELAY
DELAY
DELAY
DELAY
MOV
MOV
CALL
ADDRH,#00H
ADDRL,#29H
WRITE_COMMAND
PH240320T-063-L04Q
Page23
SAMPLE Ver.02
SPEC Edi.003
3. QUALITY ASSURANCE SYSTEM
3.1
Quality Assurance Flow Chart
Item
Customer
Sales
Info
Marketing
&
Design
R&D
Manufactu Product
Inventory
Purchase
ring
control
control
Q.A
Survey
Request
Project
Inquiry
evaluation
Project Validation
NG
OK
Quote
Contract
Design check
Sample test
Sample
Approval
NG
Verification
NG
OK
Sample approval
OK
Pilot
Pilot
Run
&
Mass
Product
NG
Verification
OK
Specification preparation
Mass production
OK
Ship
Out
PH240320T-063-L04Q
run & Reliability test
Inspection
NG
Shipment
Ship out
Page24
SAMPLE Ver.02
SPEC Edi.003
Item
Customer
Sales
Info
Claim
R&D
Q.A
Manufact Product
Inventory
Purchase
uring
control
control
Failure analysis
Sales
Service
Analysis report
Corrective action
Tracking
1. ISO 9001 Maintenance Activities
Q.A
3. Equipment calibration
Activity 5. Standardization Management
PH240320T-063-L04Q
Page25
2. Process improvement proposal
4. Education And Training Activities
SAMPLE Ver.02
SPEC Edi.003
3.2 Inspection Specification
PH240320T-063-L04Q
Page26
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page27
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page28
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page29
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page30
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page31
SAMPLE Ver.02
SPEC Edi.003
PH240320T-063-L04Q
Page32
SAMPLE Ver.02
SPEC Edi.003
4. RELIABILITY TEST
(Ver.B01)
4.1 Reliability Test Condition
NO.
TEST ITEM
1
High Temperature
Storage Test
2
Low Temperature
Storage Test
3
High Temperature /
High Humidity
Storage Test
4
Temperature Cycling
Storage Test
5
ESD Test
6
Vibration Test
(Packaged)
7
Drop Test
(Packaged)
TEST CONDITION
Keep in +80 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
Keep in -30 ±2℃ 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
Keep in +60 ℃ / 90% R.H duration for 96 hrs
Surrounding temperature, then storage at normal condition 4hrs.
(Excluding the polarizer)
-30℃ → +25℃ →
+80℃ → +25℃
(30mins)
(5mins)
(30mins)
(5mins)
10 Cycle
Surrounding temperature, then storage at normal condition 4hrs.
Air Discharge:
Contact Discharge:
Apply 2 KV with 5 times
Apply 250 V with 5 times
Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃∼35℃
2. Humidity relative : 30%∼60%
3. Energy Storage Capacitance(Cs+Cd) : 150pF±10%
4. Discharge Resistance(Rd) : 330Ω±10%
5. Discharge, mode of operation :
Single Discharge (time between successive discharges at least 1 sec)
(Tolerance if the output voltage indication : ±5%)
1. Sine wave 10∼55 Hz frequency (1 min/sweep)
2. The amplitude of vibration :1.5 mm
3. Each direction (X、Y、Z) duration for 2 Hrs
Packing Weight (Kg)
0 ~ 45.4
Drop Height (cm)
122
45.4 ~ 90.8
76
90.8 ~ 454
61
Over 454
46
Drop Direction :※1 corner / 3 edges / 6 sides each 1time
PH240320T-063-L04Q
Page33
SAMPLE Ver.02
SPEC Edi.003
5. PRECAUTION RELATING PRODUCT HANDLING
5.1 SAFETY
5.1.1
5.1.2
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
using soap and water.
5.2 HANDLING
5.2.1
5.2.2
5.2.8
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
module , be sure to ground your body and any electrical equipment you may be using.
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
surface of plate.
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
a cleaning naphtha solvent.
To control temperature and time of soldering is 320±10℃and 3-5 sec.
5.2.9
To avoid liquid (include organic solvent) stained on LCM .
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.3 STORAGE
5.3.1
Store the panel or module in a dark place where the temperature is 25℃ ±5℃
5.3.2
5.3.3
and the humidity is below 65% RH.
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
5.4 TERMS OF WARRANTY
5.4.1
5.4.2
Applicable warrant period
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
Unaccepted responsibility
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
PH240320T-063-L04Q
Page34
SAMPLE Ver.02
SPEC Edi.003