Datesheet - Silikron

SSTS3040CT
Main Product Characteristics:
IF
30A
VRRM
40V
Tj(max)
150℃
Vf(max)
0.53V
TO-220
Schematic Diagram
SSTS3045CT
Features and Benefits:



High Junction Temperature
High ESD Protection
High Forward & Reverse Surge capability
Description:
Schottky Barrier Rectifier designed for high frequency switch model power supplies such as adaptors and DC/DC
convertors; this product special design for high forward and reverse surge capability
Absolute Rating:
Symbol
VRRM
VR(RMS)
Characterizes
Value
Unit
Peak Repetitive Reverse Voltage
40
V
RMS Reverse Voltage
28
V
30
A
200
A
IF(AV)
Average Forward Current
Per diode
IFSM
Non Repetitive Surge Forward Current(tp=8.3ms sinusoidal)
IRRM
Peak Repetitive Reverse Surge Current(Tp=2us)
2
A
TJ
Maximum operation Junction Temperature Range
-55~150
℃
Tstg
Storage Temperature Range
-55~150
℃
Value
Unit
2
℃/W
Thermal Resistance
Symbol
RθJC
Characterizes
Maximum Thermal Resistance Junction To
Case(per leg)
TO220
Electrical Characterizes @TA=25℃ unless otherwise specified
Symbol
Characterizes
Min
VR
Reverse Breakdown Voltage
VF
Forward Voltage Drop
IR
Leakage Current
©Silikron Semiconductor CO., LTD.
Typ
Max
40
V
0.53
0.48
0.5
50
2012.9.20
www.silikron.com
Unit
V
mA
Test Condition
IR=0.5mA
IF=30A, TJ=25℃
IF=30A, TJ=125℃
VR=40V, TJ=25℃
VR=40V, TJ=125℃
V1.0(Preliminary)
page
1of5
SSTS3040CT
I-V Curves:
Figure 1:Typical Forward Characteristics
Figure 2:Typical Capacitance Characteristics
Figure 3:Typical Reverse Characteristics
©Silikron Semiconductor CO., LTD.
2012.9.20
www.silikron.com
V1.0(Preliminary)
page
2of5
SSTS3040CT
Mechanical Data:
TO220 PACKAGE OUTLINE DIMENSION_GN
Symbol
A
A1
A2
b
b1
b2
C
D
D1
D2
E
E1
ФP
ФP1
e
e1
L
L1
L2
L3
Dimension In Millimeters
Min
Nom
Max
4.400
4.550
4.700
1.270
1.300
1.330
2.240
2.340
2.440
1.270
1.270
1.370
1.470
0.750
0.800
0.850
0.480
0.500
0.520
15.100
15.400
15.700
8.800
8.900
9.000
2.730
2.800
2.870
9.900
10.000
10.100
8.700
3.570
3.600
3.630
1.400
1.500
1.600
2.54BSC
5.08BSC
13.150
13.360
13.570
7.35REF
Dimension In Inches
Nom
Max
0.179
0.185
0.051
0.052
0.092
0.096
0.050
0.054
0.058
0.031
0.033
0.020
0.021
0.606
0.618
0.350
0.354
0.110
0.113
0.394
0.398
0.343
0.142
0.143
0.059
0.063
0.1BSC
0.2BSC
0.518
0.526
0.534
0.29REF
Min
0.173
0.050
0.088
0.050
0.030
0.019
0.594
0.346
0.107
0.390
0.141
0.055
2.900
1.650
3.000
1.750
3.100
1.850
0.114
0.065
0.118
0.069
0.122
0.073
L4
0.900
1.000
1.100
0.035
0.039
0.043
Q1
50
70
90
50
70
90
Q2
Q3
0
5
50
0
7
70
0
9
90
0
5
50
0
7
70
90
90
Q4
10
30
50
10
30
50
©Silikron Semiconductor CO., LTD.
2012.9.20
www.silikron.com
V1.0(Preliminary)
page
3of5
SSTS3040CT
Ordering and Marking Information
Device Marking: SSTS3040CT
Package (Available)
TO-220
Operating Temperature Range
C : -55 to 150 ºC
Devices per Unit
Package
Type
Units/ Tubes/
Tube Inner
Box
Units/Inner
Box
Inner
Boxes/Carton
Box
Units/Carto
n
Box
TO220
50
1000
6
6000
20
Reliability Test Program
Test Item
Conditions
Duration
Sample Size
High
Temperature
Reverse
Bias(HTRB)
Tj=125℃ to 175℃ @
80% of Max
VDSS/VCES/VR
168 hours
500 hours
1000 hours
3 lots x 77 devices
©Silikron Semiconductor CO., LTD.
2012.9.20
www.silikron.com
V1.0(Preliminary)
page
4of5
SSTS3040CT
ATTENTION:
■
■
■
■
■
■
■
■
■
Any and all Silikron products described or contained herein do not have specifications that can handle applications
that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other
applications whose failure can be reasonably expected to result in serious physical and/or material damage.
Consult with your Silikron representative nearest you before using any Silikron products described or contained
herein in such applications.
Silikron assumes no responsibility for equipment failures that result from using products at values that exceed,
even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed
in products specifications of any and all Silikron products described or contained herein.
Specifications of any and all Silikron products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees of the
performance, characteristics, and functions of the described products as mounted in the customer’s products or
equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer
should always evaluate and test devices mounted in the customer’s products or equipment.
Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to
accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause
damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for
safe design, redundant design, and structural design.
In the event that any or all Silikron products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported
without obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior
written permission of Silikron Semiconductor CO.,LTD.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for
volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or
implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
Silikron product that you intend to use.
This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change
without notice.
Customer Service
Worldwide Sales and Service:
[email protected]
Technical Support:
[email protected]
Suzhou Silikron Semiconductor Corp.
11A, 428 Xinglong Street, Suzhou Industrial Park, P.R.China
TEL: (86-512) 62560688
FAX: (86-512) 65160705
E-mail: [email protected]
©Silikron Semiconductor CO., LTD.
2012.9.20
www.silikron.com
V1.0(Preliminary)
page
5of5