DATA SHEET SKY65313-21: 900 MHz Transmit/Receive Front-End Module Applications Description • Automated meter reading Skyworks SKY65313-21 is a high performance, transmit/receive (T/R) Front-End Module (FEM). The device provides a complete T/R chain with T/R switches. • Advanced metering infrastructure • ISM systems The device transmit chain features +30.5 dBm output power and a 40 percent Power Added Efficiency (PAE). Features • Transmit output power > +30.5 dBm • High efficiency PA • Analog power control • Receive path NF <1.9 dB • LNA bypass mode • Integrated control logic • Internal RF match and bias circuits • All RF ports internally DC blocked • Shutdown mode • Small footprint, MCM (28-pin, 6 x 6 mm) package (MSL3, 260 °C per JEDEC J-STD-020) The device receive chain features a Low Noise Amplifier (LNA) with a 1.4 dB Noise Figure (NF) and 16.6 dB gain. The cascaded NF and gain, taking into account the 0.5 dB insertion loss transmit/receive antenna switch, are 1.9 dB and 16.1 dB, respectively, which makes the SKY65313-21 ideal for medium power microwave links such as 900 MHz Industrial, Scientific and Medical (ISM) band applications. The module also has a shut-down mode and LNA bypass mode to minimize power consumption. The device is mounted in a 28-pin, 6 x 6 mm Multi-Chip Module (MCM) Surface-Mounted Technology (SMT) package, which allows for a highly manufacturable low-cost solution. The device package and pinout for the 28-pin MCM are shown in Figure 1. A block diagram of the SKY65313-21 is shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Figure 1. SKY65313-21 Pinout – 28-Pin MCM (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 1 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 2. SKY65313-21 Block Diagram Table 1. SKY65313-21 Signal Descriptions Pin # Name Description Pin # Name Description 1 GND Ground 15 GND Ground 2 CTL1 Transmit/receive mode digital control input 16 VDD1 3.3 V power supply 3 CTL2 Shutdown mode digital control input 17 VCC_RX 3.3 V power supply 4 CTL3 Receive bypass mode digital control input 18 RX3 LNA and bypass switch output port. Internally matched to 50 Ω. 5 VPC Transmit output power analog control voltage input 19 GND Ground 6 GND Ground 20 TX PA input port. Internally matched to 50 Ω. 7 ANT Antenna switch common port. Internally matched to 50 Ω. 21 GND Ground 8 GND Ground 22 GND Ground 9 GND Ground 23 VDD2 4.0 V power supply 10 RX1 Receive arm of antenna switch. Internally matched to 50 Ω. 24 VCC_TX1 4.0 V power supply 11 GND Ground 25 VCC_TX2 4.0 V power supply 12 GND Ground 26 VCC_TX3 4.0 V power supply 13 RX2 LNA and bypass switch input port 27 GND Ground 14 GND Ground 28 GND Ground Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Technical Description Receive Path The SKY65313-21 consists of a complete T/R chain with T/R switches contained in the module. A Single-Pole Double-Throw (SPDT) switch selects between the receive and transmit paths. The module has a shut-down mode to minimize power consumption. The receive path contains an LNA with bypass switch. The LNA impedance matching networks are internal to the module and have been optimized for a low NF while maintaining good return losses into a 50 Ω source and load impedance. The receive arm of the SPDT switch and the LNA input are connected to module pins to allow an external filter to be inserted into the receive path. Three digital input pins (CTL1, CTL2, and CTL3) are used to select between transmit, receive, receive bypass, or shutdown mode. Operation Mode Control Transmit Path The four SKY65313-21 operating modes are controlled by the three digital pins CTL1, CTL2, and CTL3 (pins 2, 3, and 4, respectively). The control logic truth Table is provided in Table 2. The transmit path contains a Power Amplifier (PA) optimized for saturated performance. The PA output is internally matched for optimum output power and efficiency into a 50 Ω load impedance. The PA output is passed through an harmonic filter before being fed through the SPDT switch. The PA input provides a good return loss into a 50 Ω source impedance. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY65313-21 are provided in Table 3. Recommended operating conditions are specified in Table 4. Electrical specifications are provided in Tables 5, 6, and 7. Transmit output power is controlled by the VPC pin, which is normally set to 2.25 V DC voltage. The nominal DC input impedance into the VPC pin is 50 kΩ. Typical performance characteristics of the SKY65313-21 are illustrated in Figures 3 through 22. Table 2. SKY65313-21 Operating Modes Truth Table (Note 1) Control Voltage Operating Mode Internal States CTL1 (Pin 2) CTL2 (Pin 3) CTL3 (Pin 4) Transmit 1 1 Receive 0 1 Receive Bypass 0 Shutdown (Note 2) X LNA Bypass Switch T/R Switch Off Open Transmit On Open RX1 Off Off Through RX1 Off Off Open RX1 PA LNA X On 0 Off 1 1 0 X Note 1: See Recommended Operating Conditions Table for logic 0 and 1 characteristics. “X” = don’t care state, defined as a valid state of logic 1 or 0. Note 2: In the high state, CTL1, CTL2, and CTL3 have an input current of 33 μA due to an internal 100 kΩ pulldown. In the shutdown mode, for the lowest leakage current, the high state is not recommended for CTL1 and CTL3. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 3 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Table 3. SKY65313-21 Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units –0.3 +5.0 V 20 mA –0.3 +5.0 V 1.6 A LNA supply voltage VCC_RX LNA supply current ICC1 PA supply voltage VCC_TX1/2/3 PA supply current ICC2 Digital supply voltage VDD1 –0.5 +5.5 V Digital supply voltage VDD2 –0.5 +5.5 V Digital control voltage (CTL1, CTL2, CTL3) VCTL –0.5 VDD1 + 0.3 V Transmit output power control voltage (VPC) VPC –0.3 +5.0 V Receive RF input power (RX2) PIN_RX2 +5 dBm Receive RF input power (ANT) PIN_ANT +33 dBm Transmit RF input power PIN_TX +15 dBm Operating case temperature TC –40 +85 °C Storage temperature TSTG –55 +150 °C Junction temperature TJ +150 °C T/R port load VSWR in transmit mode VSWR 10:1 – Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Nominal thermal resistance, junction to case, is 18 °C/W. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 4. SKY65313-21 Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units 960 MHz 3.6 V Frequency range f 860 LNA supply voltage VCC_RX 3.0 Digital supply voltage (Note 1) VDD1 PA supply voltage VCC_TX1/2/3 Digital supply voltage (Note 1) VDD2 Digital input voltage, logic 0 (CTL1, CTL2, CTL3) VCTL 0 0.7 V Digital input voltage, logic 1 (CTL1, CTL2, CTL3) VCTL 1.6 VDD1 V Transmit output power control voltage (VPC) VPC 0 2.25 2.50 V –15 dBm +10 +13 dBm 50 % Receive RF input power (RX2) PIN_RX2 Transmit RF input power (TX) PIN_TXIN Transmit duty cycle 3.3 VCC_RX 3.0 4.0 V 4.4 VCC_TX1/2/3 V Note 1: VDD1 and VDD2 are diode-coupled together with a typical turn-on voltage of 3.2 V. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 V June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Table 5. SKY65313-21 DC Electrical Specifications (Note 1) (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = –40 °C to +85 °C, No RF Input Power, Unless Otherwise Noted) Parameter Symbol Min Typical Max Units 7.5 12.6 20.0 mA IQ_BYP 46 90 μA VDD1 quiescent current, transmit mode IQ_VDD1 25 30 mA VCC_TX1/2/3/quiescent current, transmit mode IQ_TXIN TC = 25 °C, VCC_TX1/2/3 = 4 V, VPC = 2.25 V 55 88 mA VCC_TX1/2/3/ operating current, transmit mode IOP_TXIN PIN = +10 dBm, @ 902 to 928 MHz, VPC = 2.25 V 655 826 mA VCC_RX quiescent current, shudown mode (Note 2) (Note 3) IQ_SDVCC_RX 0.01 μA VCC_TX1/2/3 quiescent current, shutdown mode (Note 2) (Note 3) IQ_SDVCC_TX1, IQ_SDVCC_TX2, IQ_SDVCC_TX3 0.03 μA Digital input current, logic 1 (Note 3) IH 33 μA Digital input current, logic 0 (Note 3) IL 0 μA Quiescent current, receive mode (Note 2) IQ_RX Quiescent current, receive bypass mode (Note 2) Test Condition Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: Total module power supply current. Note 3: Not production tested. Table 6. SKY65313-21 Electrical Specifications: Receive and Receive Bypass Mode (1 of 2) (Note 1) (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = –40 °C to +85 °C, f = 902 to 928 MHz, 50 Ω Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 15.6 16.6 18.3 dB 1.4 1.8 dB Receive Mode: RX2 to Receive Output Path Small signal gain GLNA Noise Figure NFLNA Noise Figure variation over temperature NFTEMP ±0.25 dB 1 dB Input Compression Point IP1dBLNA 1 dB gain compression –13 –11 dBm 3rd Order Input Intercept Point IIP3LNA PIN = –30 dBm/tone, 200 kHz spacing –3.5 0 dBm Input return loss |S11|LNA 8.0 10.7 dB Output return loss |S22|LNA 10.0 13.6 dB Reverse isolation |S12|LNA 20 22 dB Non-harmonic spurious (Note 2) (Note 3) PSPUR_LNA Transition time (Note 2) TLNA TC = 25 °C, VCC_RX = 3.3 V VSWR 10:1, all phases –50 dBm μs 0.5 Receive Bypass Mode: RX2 to Receive Output Path Insertion loss LBYP 1 dB Input Compression Point IP1dBBYP 1 dB gain compression +15 +16 dBm 3 Order Input Intercept Point IIP3BYP PIN = –30 dBm/tone, 200 kHz spacing +27 +30 dBm Input return loss |S11|BYP 12 15 dB rd 3 4 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 5 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Table 6. SKY65313-21 Electrical Specifications: Receive and Receive Bypass Mode (2 of 2) (Note 1) (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX1/2/3 = VDD2 = 3.6 V to 4.4 V, TC = –40 °C to +85 °C, f = 902 to 928 MHz, 50 Ω Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Receive Bypass Mode: RX2 to Receive Output Path (continued) Output return loss |S22|BYP Transition time (Note 2) TBYP 12 22 dB 0.5 μs Receive and Receive Bypass Mode: ANT to RX1 Path Insertion loss LANT 0.5 0.9 dB 1 dB Input Compression Point (Note 2) IP1dBANT 1 dB gain compression +35 dBm 3rd Order Input Intercept Point (Note 2) IIP3ANT PIN = –30 dBm/tone, 200 kHz spacing +50 dBm Input return loss |S11|ANT 12 15 dB Output return loss |S22|ANT 12 15 dB Transition time (Note 2) TANT 0.5 μs Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: Not production tested. Note 3: Measurement performed with spectrum analyzer RBW = 100 kHz for frequencies < 1 GHz and RBW = 1 MHz for frequencies between 1 GHz and 10 GHz. Table 7. SKY65313-21 Electrical Specifications: Transmit Mode (1 of 2) (Note 1) (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX2 = VDD2 = 3.6 V to 4.4 V, TC = –40 °C to +85 °C, f = 902 to 928 MHz, 50 Ω Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units +30.0 +30.5 dBm TXIN to ANT Path Saturated output power POUT PIN = +10 dBm, TC = 25 °C, VCC_TX1/2/3 = 4.0 V, VPC = 2.25 V Output power variation over supply voltage PIN = +10 dBm, VPC = 2.25 V ±0.8 dB Output power variation over temperature PIN = +10 dBm, VPC = 2.25 V ±0.15 dB 50 dB 41 % Output power control PCTL PIN = +10 dBm, VPC = 0 V to 2.7 V (Note 2) Power-Added Efficiency PAE PIN = +10 dBm 2 harmonic 2fo PIN = +10 dBm –36 –20 dBc 3rd harmonic 3fo PIN = +10 dBm –62 –58 dBc 4th harmonic 4fo PIN = +10 dBm –76 –66 dBc 5 harmonic 5fo PIN = +10 dBm –78 –70 dBc 6th – 10th harmonics (Note 3) 6fo – 10fo PIN = +10 dBm –70 dBc Input return loss |S11|TX PIN = +10 dBm, TC = 25 °C, VCC_TX1/2/3 = 4.0 V, VPC = 2.25 V Output impedance (Note 4) ZOUT_TX PIN = +10 dBm Non-harmonic spurious (Note 4) (Note 5) PSPUR_TX VSWR 10:1, all phases Transition time (Note 4) TTX nd th 40 10 16 dB 39–j46 Ω –50 0.5 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A dBm μs DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Table 7. SKY65313-21 Electrical Specifications: Transmit Mode (2 of 2) (Note 1) (VCC_RX = VDD1 = 3.0 V to 3.6 V, VCC_TX2 = VDD2 = 3.6 V to 4.4 V, TC = –40 °C to +85 °C, f = 902 to 928 MHz, 50 Ω Source and Load Impedance, CW Input, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical 18 23 Max Units ANT to RX1 Path Isolation |S21|ANT dB Note 1: Performance is guaranteed only under the conditions listed in this Table. Note 2: Output power control is the difference between the output power at VPC = 2.25 V and VPC = 0 V. Note 3: Only the 2nd to 5th harmonics have been production tested. The 6th to 10th harmonics are characterized only. Note 4: Not production tested. Note 5: Measurement performed with spectrum analyzer RBW = 100 kHz for frequencies < 1 GHz and RBW = 1 MHz for frequencies between 1 GHz and 10 GHz. Typical Performance Characteristics Figure 3. PA Saturated Output Power vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, PIN = +10 dBm, VPC = 2.25 V) Figure 4. PA Saturated Output Power vs Frequency Over VCC_TX/1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, PIN = +10 dBm, VPC = 2.25 V) Figure 5. PA Gain vs Output Power Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, VPC = 2.25 V) Figure 6. PA Output Power vs VPC Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, PIN = +10 dBm) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 7 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 7. PA Operating Current vs Output Power Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V, f = 915 MHz, VPC = 2.25 V) Figure 8. PA Operating Current vs Output Power Over VCC_TX/1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, f = 915 MHz, VPC = 2.25 V) Figure 9. PA 2nd Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, PIN = +10 dBm VPC = 2.25 V) Figure 10. PA 3rd Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, PIN = +10 dBm VPC = 2.25 V) Figure 11. PA 4th Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, PIN = +10 dBm VPC = 2.25 V) Figure 12. PA 5th Harmonic vs Frequency Over VCC_TX1/2/3 (VDD1 = VCC_RX = 3.3 V, TC = 25 °C, PIN = +10 dBm VPC = 2.25 V) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 13. LNA Gain vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V) Figure 14. LNA Gain vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Figure 15. LNA IIP3 vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Figure 16. LNA IIP3 vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Figure 17. LNA Noise Figure vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VCC_RX = VDD1 = 3.3 V) Figure 18. LNA Noise Figure vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 9 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 19. Antenna Switch Insertion Loss vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, VDD1 = VCC_RX = 3.3 V) Figure 20. Antenna Switch Insertion Loss vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Figure 21. Bypass Switch Insertion Loss vs Frequency Over Temperature (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Figure 22. Bypass Switch Insertion Loss vs Frequency Over VCC_RX (VCC_TX/1/2/3 = VDD2 = 4.0 V, TC = 25 °C) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Evaluation Board Description Package and Handling Information The SKY65313-21 Evaluation Board is used to test the performance of the SKY65313-21 T/R FEM. A typical application schematic diagram is provided in Figure 23. An Evaluation Board schematic diagram is provided in Figure 24. An assembly drawing for the Evaluation Board is shown in Figure 25. Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY65313-21 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 °C. It can be used for lead or lead-free soldering. For additional information, refer to Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. The PCB layout footprint for the SKY65313-21 is provided in Figure 26. Package dimensions for the 28-pin MCM are shown in Figure 27, and tape and reel dimensions are provided in Figure 28. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Figure 23. SKY65313-21 Typical Application Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 11 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 24. SKY65313-21 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 25. SKY65313-21 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 13 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 26. SKY65313-21 PCB Layout Footprint Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 27. SKY65313-21 28-Pin MCM Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 15 DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Figure 28. SKY65313-21 28-Pin MCM Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16 June 29, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202121A DATA SHEET • SKY65313-21 T/R FRONT-END MODULE Ordering Information Model Name SKY65313-21 T/R Front-End Module Manufacturing Part Number SKY65313-21 Evaluation Board Part Number TW21-D300 Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202121A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 29, 2012 17