Selection Guide 2012 Supplement DC-DC CONVERTERs AC-DC Power Supplies www.tracopower.com Product Index - Selection Guide 2012 Supplementary Product release scheduled for first quarter of 2013 DC/DC Converters Page TSN-1 Series 1 A Non isolated point of load switching regulator for negative output, high efficiency, pin compatible with LM79xx linear regulator 3 TMR-1SM Series 1W Compact SMD package, fully regulated 1 W converter with wide 2:1 input voltage range 3 TMR-1 Series 1W Compact SIP package, fully regulated 1 W converter with wide 2:1 input voltage range 4 TMV-HI Series 1W 5200 VDC I/O-isolation converter in ultra compact SIP package, dedicated for IGBT applications 4 TEM-3N Series 3W Cost optimize fully regulated 3 W converter in DIP-24 package, ±10% input voltage range 5 THI-3 Series 3W Reinforced I/O-isolation 3000 VAC with medical safety approval 2 x MOOP, DIP-24 package, ±10% input voltage range 5 THM-3WI Series 3W Reinforced I/O-isolation 5000 VAC converter with medical safety approval 2 x MOPP, DIP-24 package with ultra wide 4:1 input voltage range 6 TMR-6WI Series 6W Highest power density fully regulated 6 W converter in SIP package, ultra wide 4:1 input voltage range 6 THM-6WI Series 6W Reinforced I/O-isolation 5000 VAC converter with medical safety approval 2 x MOPP, DIP-24 package with ultra wide 4:1 input voltage range 7 THM-10WI Series 10W Reinforced I/O-isolation 5000 VAC converter with medical safety approval 2 x MOPP, DIP-24 package with ultra wide 4:1 input voltage range 7 TEN-50WI Series 50W Ultra compact 50W converter in 2” x 1” package, ultra wide 4:1 input voltage range 8 TEN-60N Series 60W Highest power density 60 W converter in 2” x 1” package with wide 2:1 input voltage range 8 TEN-60WIN Series 60W Highest power density 60 W converter in 2” x 1” package with ultra wide 4:1 input voltage range 9 TEQ-100WIR Series 100W High power block with excellent thermal convection, allowing full load operation up to +85°C without forced air cooling, increased robustness, railway approval EN 50155 9 TEQ-160WIR Series 144-182W High power block with excellent thermal convection, allowing full load operation up to +70°C without forced air cooling, increased robustness, railway approval EN 50155 10 TEQ-200WIR Series 180-240W High power block with excellent thermal convection, allowing full load operation up to +55°C without forced air cooling, increased robustness, railway approval EN 50155 10 TMSB-2 Series 2W Standby power module to meet with ErP directive, no current limit, constant power mode at 2 W, suitable to drive relays, solenoids, capacitive loads and LED’s 11 TMM-24 Series 24W Fully encapsulated low profile power supply with medical safety approval 2 x MOPP, ready to meet ErP directive, extended temp. range 11 TMM-40 Series 40W Fully encapsulated low profile power supply with medical safety approval 2 x MOPP, ready to meet ErP directive, extended temp. range 12 TMM-60 Series 60W Fully encapsulated low profile power supply with medical safety approval 2 x MOPP, ready to meet ErP directive, extended temp. range 12 TML-100C Series 100W Fully encapsulated power supply with high efficiency and active power factor correction 13 TIW Series 24W Flush box mount power supply, dust and waterproof to IP67, household appliance safety approval to EN 60335-1 13 TPP Series 100-150W High power density open frame power supplies with medical safety approval 2 x MOPP, excellent efficiency across full load range to meet ErP directive, active PFC 14 TSP/TSPC Series Modules Extended range of battery control modules for professional DC-UPS systems. 14 TFP Series 240-750W Low profile DIN-rail power supplies in robust metal casing, extended functional features, CAN-bus and LAN interface modules, current share and battery control function. 15 AC/DC Power Supplies 2 www.tracopower.com Page TSN-1 Series 1A Step down Non-isolated DC/DC converter for negative output Small size and low profile Pin compatible with LM79xx regulators No heatsink required High efficiency up to 94 % Protection against overload, short circuit and over-temperature Fixed switching frequency DC/DC Converter Models Specifications Order code * Input voltage Output voltage Output current max. 0.6 % max. TSN 1-2450 TSN 1-2452 -7.5 - -32 VDC -7.5 - -32 VDC -5.0 VDC -5.2 VDC -1000 mA -1000 mA continuous, automatic recovery TSN 1-2460 -8.5 - -32 VDC -6.0 VDC -1000 mA 92 % typ. TSN 1-2480 -11 - -32 VDC -8.0 VDC -1000 mA TSN 1-2490 -12 - -32 VDC -9.0 VDC -1000 mA TSN 1-24120 -15 - -32 VDC -12 VDC -1000 mA TSN 1-24150 -18 - -32 VDC -15 VDC -1000 mA Line regulation 1.0 % max. Load regulation Short circuit protection Efficiency Operating temperature range –40 ° C to +85 ° C above 70 °C derating 2.7 %/K I/O isolation voltage non isolated Standby input current 3 mA Full datasheet www.tracopower.com/products/tsn1.pdf * order code for angular-pins, add suffix -A 0.5 (0.02) 0.5 (0.02) 1.5 (0.06) 7.5 (0.30) 3.0 (0.09) 4.1 (0.16) 7.5 (0.30) Bottom view 3.1 (0.095) 0.3 (0.01) Bottom view 0.3 (0.01) 11.7 (0.46) 11.7 (0.46) 3.3 16.5 (0.65) 1 3.3 2 3 0.5 (0.02) 3 4.1 2 (0.16) 1 0.5 (0.02) 16.5 (0.65) Pin Out Pin Single 1 GND 2 -Vin 3 -Vout 2.54 2.54 (0.13) (0.1) (0.1) 2.54 2.54 (0.13) (0.1) (0.1) TMR-1SM Series 1W SMD DC/DC Converter Wide 2:1 input voltage range Fully regulated outputs No minimum load required I/O isolation 1500 VDC Short circuit protection Remote On/Off Specifications Line regulation 0.2 % max. Load regulation 1 % max. Short circuit protection continuous, automatic recovery Efficiency 80 % typ. Operating temperature range -40 ° C to +85 ° C above 75 °C derating 6.7 %/K I/O isolation voltage 1500 VDC (60 sec.) Remote On/Off shutdown input for low input current (2.5 mA) in standby operation Full datasheet www.tracopower.com/products/tmr1sm.pdf Models Order code TMR 1-0511SM TMR 1-0512SM TMR 1-0513SM 1.3 (0.05) Single Dual 1 -Vin -Vin 6 2 On/Off On/Off 6 NC Common 7 NC -Vout 8 +Vout 9 14 18.9 (0.74) 7 9 top view 0.8 (0.03) (0.1) 2.54 10.16 Pin 8 (0.4) (0.07)(0.1) 1.8 2.54 12.8 (0.50) 2 14 1 4.5-9.0 VDC Output voltage Output current max. 5 VDC 12 VDC 200 mA 83 mA 15 VDC 67 mA TMR 1-0522SM ± 12 VDC ± 42 mA TMR 1-0523SM ± 15 VDC ± 33 mA TMR 1-1211SM TMR 1-1212SM 5 VDC 12 VDC 200 mA 83 mA TMR 1-1213SM Pin-Out 17.2 (0.68) 8.7 (0.35) Input voltage 15 VDC 67 mA TMR 1-1222SM ± 12 VDC ± 42 mA TMR 1-1223SM ± 15 VDC ± 33 mA TMR 1-2411SM TMR 1-2412SM 5 VDC 12 VDC 200 mA 83 mA TMR 1-2413SM 9-18 VDC 15 VDC 67 mA TMR 1-2422SM 18-36 VDC ± 12 VDC ± 42 mA TMR 1-2423SM ± 15 VDC ± 33 mA +Vout TMR 1-4811SM TMR 1-4812SM 5 VDC 12 VDC 200 mA 83 mA -Vout Common TMR 1-4813SM 15 VDC 67 mA +Vin +Vin TMR 1-4822SM ± 12 VDC ± 42 mA TMR 1-4823SM ± 15 VDC ± 33 mA 36-75 VDC www.tracopower.com 3 TMR-1 Series 1W DC/DC Converter Compact SIP package Wide 2:1 input voltage range Fully regulated outputs No minimum load required I/O isolation voltage 1500 VDC Short circuit protection Models Specifications Line regulation 0.2 % max. Load regulation 1 % max. Short circuit protection continuous automatic recovery Efficiency 78 % typ. Operating temperature –40 ° C to +85 ° C without derating I/O isolation voltage 1500 VDC (60 sec.) Full datasheet www.tracopower.com/products/tmr1.pdf (0.4) Order code 3.2 (0.13) 0.5 (0.02) 11.0 Pin-Out 0.5 (0.02) 2.15 ±0.4 2.54 5.08 (0.1) (0.2) (0.09 ±0.02) 2.54 2.54 (0.1) 0.5 (0.02) (0.1) 5 6 -Vin Dual -Vin 2 +Vin +Vin 4 +Vout +Vout 5 No Pin Common 6 -Vout -Vout 7.62 4 1 2.5 0.5 (0.02) (0.10) 2 0.25 Bottom view 1 Single (0.30) (0.01) 17.0 (0.67) Pin TMV-HI Series 1W TMR 1-0511 TMR 1-0512 TMR 1-0513 TMR 1-0515 TMR 1-0522 TMR 1-0523 TMR 1-1211 TMR 1-1212 TMR 1-1213 TMR 1-1215 TMR 1-1222 TMR 1-1223 TMR 1-2411 TMR 1-2412 TMR 1-2413 TMR 1-2415 TMR 1-2422 TMR 1-2423 TMR 1-4811 TMR 1-4812 TMR 1-4813 TMR 1-4815 TMR 1-4822 TMR 1-4823 Input voltage 4.5-9.0 VDC 9-18 VDC 18-36 VDC 36-75 VDC High Isolation Output voltage Output current max. 5 VDC 12 VDC 15 VDC 24 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC 24 VDC ± 12 VDC ± 15 VDC 200 mA 83 mA 67 mA 42 mA ± 42 mA ± 33 mA 200 mA 83 mA 67 mA 42 mA ± 42 mA ± 33 mA 200 mA 83 mA 67 mA 42 mA ± 42 mA ± 33 mA 200 mA 83 mA 67 mA 42 mA ± 42 mA ± 33 mA DC/DC Converter Ultra compact SIP package Very high 5200 VDC I/O-isolation Dedicated for IGBT applications Operating temperature range -40 °C to +85 °C Models Specifications Order code Line regulation 1.2 % Load regulation 15 % max. Efficiency 76 % typ. Operating temperature –40 ° C to +85 ° C without derating I/O isolation voltage 5200 VDC (60 sec.) I/O isolation capacitance 7 pF typ. >10 GOhm Full datasheet www.tracopower.com/products/tmv-hi.pdf 0.5 (0.02) 10.2 (0.4) I/O isolation resistance Pin-Out 3.2 (0.13) 0.5 (0.02) 2.15 ±0.4 2.54 (0.09 (0.1) ±0.02) 7.62 (0.3) 2.54 2.54 (0.1) 0.5 (0.02) (0.1) 0.5 (0.02) 4 www.tracopower.com 7 (0.01) 6 2.0 Bottom view 5 (0.05) 2 0.25 1 7.1 (0.28) 19.5 (0.77) Pin Single Dual 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout 6 NP Common 7 +Vout +Vout TMV 0505SHI TMV 0512SHI TMV 0515SHI TMV 0505DHI TMV 0512DHI TMV 0515DHI TMV 1205SHI TMV 1212SHI TMV 1215SHI TMV 1205DHI TMV 1212DHI TMV 1215DHI TMV 1505SHI TMV 1512SHI TMV 1515SHI TMV 1505DHI TMV 1512DHI TMV 1515DHI TMV 2405SHI TMV 2412SHI TMV 2415SHI TMV 2405DHI TMV 2412DHI TMV 2415DHI Input voltage 5 VDC ± 10% 12 VDC ± 10% 15 VDC ± 10% 24 VDC ± 10% Output voltage Output current max. 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 200 mA 84 mA 66 mA ± 100 mA ± 42 mA ± 33 mA 200 mA 84 mA 66 mA ± 100 mA ± 42 mA ± 33 mA 200 mA 84 mA 66 mA ± 100 mA ± 42 mA ± 33 mA 200 mA 84 mA 66 mA ± 100 mA ± 42 mA ± 33 mA TEM-3N Series 3W DC/DC Converter Cost optimized design in DIP-24 package Output ripple & noise 30 mVpp Short circuit protection Input filter to meet EN 55022, class A No minimum load required Specifications Line regulation 0.2 % max. Load regulation 0.2 % max. Input filter EN55022, class A (internal filter) Short circuit protection continuous Efficiency 78 % typ. Operating temp. range –40 ° C to +85 ° C above 75 °C derating 5 %/K I/O isolation voltage 1500 VDC (60 sec.) Safety approvals cUL/UL 60950-1, IEC/EN 60950-1 (pending) TEM 3-0511N TEM 3-0512N Full datasheet www.tracopower.com/products/tem3n.pdf TEM 3-0513N Models Order code 2.0 (0.079) Pin-Out (1.1) (0.7) 0.5 20.0 5 VDC 12 VDC 600 mA 250 mA 15 VDC 200 mA TEM 3-0522N ± 12 VDC ± 125 mA Dual TEM 3-0523N ± 15 VDC ± 100 mA 1 +Vin (Vcc) +Vin (Vcc) 2 NC –Vout TEM 3-1211N TEM 3-1212N 5 VDC 12 VDC 600 mA 250 mA 2 4 3 2.54 2.54 (0.1) (0.1) (0.4 Output current max. Single Bottom View 27.94 17.78 4.5 10.2 (0.18) (0.094) 5 VDC ± 10% Output voltage Pin 2 3 24 23 22 2.54 2.54 (0.1) (0.1) 32.0 (1.26) 15.24 2.4 Input voltage (0.6) (0.787) 0.02) 3 NC Common 10 –Vout Common 11 +Vout +Vout 12 –Vin (GND) 13 –Vin (GND) 14 +Vout +Vout 15 -Vout Common 22 NC Common 15 VDC 200 mA 23 NC -Vout TEM 3-2422N ± 12 VDC ± 125 mA 24 +Vin(Vcc) +Vin(Vcc) TEM 3-2423N ± 15 VDC ± 100 mA TEM 3-1213N 15 VDC 200 mA TEM 3-1222N ± 12 VDC ± 125 mA –Vin (GND) TEM 3-1223N ± 15 VDC ± 100 mA –Vin (GND) TEM 3-2411N TEM 3-2412N 5 VDC 12 VDC 600 mA 250 mA THI-3 Series 3W TEM 3-2413N 12 VDC ± 10% 24 VDC ± 10% Reinforced Insulation DC/DC Converter CB I/O isolation voltage 3000 VACrms reinforced insulation Rated for working voltage up to 300 VAC Industrial and medical safety approvals Input filter to meet EN 55022, class A Scheme Specifications Line regulation 0.5 % max. Load regulation 0.5 % max. Input filter EN55022, class A (internal filter) Efficiency 61 % typ. Operating temp. range –40 ° C to +75 ° C above 60 °C derating 2.9 %/K I/O isolation voltage 3000 VAC (60sec.) I/O isolation capacitance 20pF typ. I/O isolation resistance >10 GOhm Safety standards / approvals (pending) IEC/EN 60601-1 3rd edition, 2 x MOOP, UL/cUL 60601-1 IEC/EN 60950-1, UL/cUL 60950-1, CB-report I/O isolation capacitance 20 pF typ. plastic (UL 94V-0 rated) Full datasheet www.tracopower.com/products/thi3.pdf (0.1) 1 2 THI 3-0513 1 +Vin(Vcc) +Vin(Vcc) Common 11 No Pin Common 12 -Vout 13 +Vout 15 No Pin 15.22 23 20.3 24 bottom view +Vin(Vcc) No Pin (0.8) (0.15) (0.41) (0.1) Dual +Vin(Vcc) 20.32 2.54 Single 2 13 3.8 10.5 Pin 10 15 (0.1) 2.54 (0.1) 2.54 (1.1) 27.94 31.8 (1.25) 24 23 (0.6) (0.8) 10 11 12 Order code Input voltage THI 3-0511 THI 3-0512 Pin-Out 2.54 2.0 (0.08) Casing Models Output current max. 5 VDC 12 VDC 600 mA 250 mA 15 VDC 200 mA THI 3-0522 ± 12 VDC ± 125 mA THI 3-0523 ± 15 VDC ± 100 mA THI 3-1211 THI 3-1212 5 VDC 12 VDC 600 mA 250 mA THI 3-1213 5 VDC ± 10% Output voltage 15 VDC 200 mA THI 3-1222 12 VDC ± 10% ± 12 VDC ± 125 mA No Pin THI 3-1223 ± 15 VDC ± 100 mA -Vout +Vout THI 3-2411 THI 3-2412 5 VDC 12 VDC 600 mA 250 mA -Vin(GND) -Vin(GND) THI 3-2413 15 VDC 200 mA -Vin(GND) -Vin(GND) THI 3-2422 ± 12 VDC ± 125 mA THI 3-2423 ± 15 VDC ± 100 mA 24 VDC ± 10% www.tracopower.com 5 THM-3WI Series 3W Reinforced Insulation CB Ultra wide 4:1 input voltage range I/O isolation voltage 5000 VACrms reinforced insulation Rated for working voltage 250 VAC Medical safety to IEC/EN60601-1 3rd edition, 2 x MOPP Very high efficiency up to 87 % Input filter meet EN 55022, class A Scheme Models Specifications Order code Input voltage Output voltage Output current max. 3.3 VDC 5 VDC 1000 mA 600 mA 12 VDC 250 mA 15 VDC 200 mA Line regulation 0.5 % max. Load regulation single output models: 0.2 % max. dual output models: 1 % max. Conducted EMI EN 55022, class A (internal filter) THM 3-0513WI Efficiency 85 % typ. THM 3-0515WI 24 VDC 125 mA Operating temperature –40 ° C to +85 ° C (with derating, tba) THM 3-0521WI ± 5 VDC ± 300 mA Safety standards/ approvals (pending) IEC/EN60601-1 3rd edition, 2 x MOPP, UL 60601-1 THM 3-0522WI ± 12 VDC ± 125 mA THM 3-0523WI ± 15 VDC ± 100 mA I/O isolation voltage 5000VAC (60 sec.), reinforced insulation rated for 250VAC working voltage, clearance/creepage 8mm THM 3-2410WI THM 3-2411WI 3.3 VDC 5 VDC 1000 mA 600 mA 12 VDC 250 mA 15 VDC 200 mA THM 3-0510WI THM 3-0511WI THM 3-0512WI I/O isolation capacitance 17pF max. THM 3-2412WI Full datasheet THM 3-2413WI www.tracopower.com/products/thm3wi.pdf 4.5 ±0.5 (0.18 ±0.02) (0.1) 2.54 Pin-Out 2 23 22 15.24 (0.6) (0.9) (0.2) 5.08 16 (1.25 ±0.02) 22.86 32 ±0.5 Bottom view 11 14 15.24 2.4 ±0.5 (0.6) 20.3 ±0.5 (0.8 ±0.02) (0.8 ±0.02) 5.0 10.2 ±0.5 (0.2) (0.4 ±0.02) 4.5-9 VDC 9-36 VDC THM 3-2415WI 24 VDC 125 mA THM 3-2421WI ± 5 VDC ± 300 mA THM 3-2422WI ± 12 VDC ± 125 mA THM 3-2423WI ± 15 VDC ± 100 mA 3.3 VDC 5 VDC 1000 mA 600 mA 12 VDC 250 mA 15 VDC 200 mA Pin Single Dual 2 -Vin(GND) -Vin(GND) 11 No con. -Vout THM 3-4810WI THM 3-4811WI 14 +Vout +Vout THM 3-4812WI 16 -Vout Common THM 3-4813WI 22 +Vin(Vcc) +Vin(Vcc) THM 3-4815WI 24 VDC 125 mA 23 +Vin(Vcc) +Vin(Vcc) THM 3-4821WI ± 5 VDC ± 300 mA THM 3-4822WI ± 12 VDC ± 125 mA THM 3-4823WI ± 15 VDC ± 100 mA (0.1 ±0.02) 18-75 VDC TMR-6WI Series 6W DC/DC Converter CB Highest power density in SIP package Smallest footprint 6W converter Operating temperature -40 to +71 °C without derating Ultra wide 4:1 input range Fully regulated outputs I/O isolation 1500 VDC No minimum load required Scheme pending Models Specifications 0.2 % max. Order code Load regulation 0.5 % max. ; 1 % max. for dual output models Efficiency 83 % typ. TMR 6-2410WI TMR 6-2411WI Operating temperature –40 ° C to +71 ° C (without derating) TMR 6-2419WI I/O isolation voltage 1500VDC (60 sec.) TMR 6-2412WI Remote On/Off shutdown input for low input current (2.5mA) in standby operation TMR 6-2413WI 15 VDC 400 mA TMR 6-2415WI 24 VDC 250 mA www.tracopower.com/products/tmr6wi.pdf TMR 6-2421WI ± 5 VDC ± 600 mA TMR 6-2422WI ± 12 VDC ± 250 mA TMR 6-2423WI ± 15 VDC ± 200 mA TMR 6-4810WI TMR 6-4811WI 3.3 VDC 5 VDC 1500 mA 1200 mA 9 VDC 666 mA 12 VDC 500 mA Pin-Out 4.1 (0.16) 0.5 (0.02) 11.2 (0.44) Line regulation Full datasheet 2.0 2 x 2.54 5.08 3 x 2.54 (0.08) (2 x 0.1) (0.2) (3 x 0.1) 3 5 6 7 8 3.2 (0.13) 2 0.5 (0.02) www.tracopower.com 9.1 (0.36) bottom view 1 0.25 (0.01) 21.8 (0.86) 6 DC/DC Converter Pin Single Dual 1 -Vin(GND) -Vin(GND) 2 +Vin(Vcc) +Vin(Vcc) 3 Remote On/Off Remote On/Off 5 No con. 6 +Vout 7 8 Input voltage 9-36 VDC TMR 6-4819WI TMR 6-4812WI 18-75 VDC Output voltage Output current max. 3.3 VDC 5 VDC 1500 mA 1200 mA 9 VDC 666 mA 12 VDC 500 mA No con. TMR 6-4813WI 15 VDC 400 mA +Vout TMR 6-4815WI 24 VDC 250 mA -Vout Common TMR 6-4821WI ± 5 VDC ± 600 mA No con. -Vout TMR 6-4822WI ± 12 VDC ± 250 mA TMR 6-4823WI ± 15 VDC ± 200 mA THM-WI Series 6 & 10W Reinforced Insulation DC/DC Converter CB Scheme 6 Watt models THM 6WI series Order code Input voltage THM 6-0510WI THM 6-0511WI Ultra wide 4:1 input voltage range I/O isolation voltage 5000 VAC reinforced insulation Rated for working voltage 250 VAC Compact DIP-24 package Medical safety to IEC/EN60601-1 3rd edition, 2 x MOPP Very high efficiency up to 89 % Input filter to meet EN 55022, class A THM 6-0512WI THM 6-0513WI Specifications 0.5 % max. Load regulation single output models: 0.2 % max. dual output models: 1 % max. Conducted EMI EN 55022, class A (internal filter) Efficiency 88 % typ. Operating temperature –40 ° C to +85 ° C (with derating, tba) Safety standards / approvals (pending) IEC/EN 60601-1 3rd edition, 2 x MOPP, UL 60601-1 I/O isolation voltage 5000 VAC (60 sec.), reinforced insulation rated for 250 VAC working voltage, clearance/creepage 8 mm Casing plastic (UL 94V-0 rated) Full datasheet www.tracopower.com/products/thm6wi.pdf www.tracopower.com/products/thm10wi.pdf 3.3 VDC 5 VDC 1800 mA 1200 mA 12 VDC 500 mA 15 VDC 400 mA 24 VDC 250 mA THM 6-0521WI ± 5 VDC ± 600 mA THM 6-0522WI ± 12 VDC ± 250 mA THM 6-0523WI ± 15 VDC ± 200 mA THM 6-2410WI THM 6-2411WI 3.3 VDC 5 VDC 1800 mA 1200 mA 12 VDC 500 mA 15 VDC 400 mA THM 6-2412WI 9-36 VDC THM 6-2415WI 24 VDC 250 mA THM 6-2421WI ± 5 VDC ± 600 mA THM 6-2422WI ± 12 VDC ± 250 mA THM 6-2423WI ± 15 VDC ± 200 mA THM 6-4810WI THM 6-4811WI 3.3 VDC 5 VDC 1800 mA 1200 mA 12 VDC 500 mA 15 VDC 400 mA THM 6-4812WI I/O isolation capacitance 17pF max. Output current max. THM 6-0515WI THM 6-2413WI Line regulation 4.5-9 VDC Output voltage THM 6-4813WI 18-75 VDC THM 6-4815WI 24 VDC 250 mA THM 6-4821WI ± 5 VDC ± 600 mA THM 6-4822WI ± 12 VDC ± 250 mA THM 6-4823WI ± 15 VDC ± 200 mA Output voltage Output current max. 3.3 VDC 5 VDC 2500 mA 2000 mA 12 VDC 830 mA 15 VDC 670 mA 10 Watt models (0.1) 2.54 4.5 (0.18 ) Order code 2 23 22 15.24 THM 10-0510WI THM 10-0511WI (0.6) (0.9) THM 10-0512WI THM 10-0513WI (0.2) 5.08 16 (1.25 ±0.02) 22.86 32 ±0.5 Bottom view 11 14 2.4 ±0.5 THM 10WI series 15.24 (0.6) (0.1 ±0.02) 20.3 ±0.5 (0.8 ±0.02) (0.8 ±0.02) 5.0 10.2 ±0.5 (0.2) (0.4 ±0.02) Input voltage 4.5-9 VDC THM 10-0515WI 24 VDC 416 mA THM 10-0521WI ± 5 VDC ± 1000 mA THM 10-0522WI ± 12 VDC ± 416 mA THM 10-0523WI ± 15 VDC ± 333 mA THM 10-2410WI THM 10-2411WI 3.3 VDC 5 VDC 2500 mA 2000 mA 12 VDC 830 mA 15 VDC 670 mA THM 10-2412WI Pin-Out THM 10-2413WI 9-36 VDC Pin Single Dual 2 THM 10-2415WI 24 VDC 416 mA -Vin(GND) -Vin(GND) 11 No con. -Vout THM 10-2421WI ± 5 VDC ± 1000 mA 14 +Vout +Vout THM 10-2422WI ± 12 VDC ± 416 mA 16 -Vout Common THM 10-2423WI ± 15 VDC ± 333 mA 22 +Vin(Vcc) +Vin(Vcc) 23 +Vin(Vcc) +Vin(Vcc) THM 10-4810WI THM 10-4811WI 3.3 VDC 5 VDC 2500 mA 2000 mA 12 VDC 830 mA 15 VDC 670 mA THM 10-4812WI THM 10-4813WI 18-75 VDC THM 10-4815WI 24 VDC 333 mA THM 10-4821WI ± 5 VDC ± 1000 mA THM 10-4822WI ± 12 VDC ± 416 mA THM 10-4823WI ± 15 VDC ± 333 mA www.tracopower.com 7 TEN-50WI Series 50W DC/DC Converter Ultra compacte 50W converter Ultra wide 4:1 input range Excellent efficiency up to 91 % Protection against over-temperature Adjustable output voltage, remote On/Off CB Scheme Specifications Line regulation 0.5 % max. Load regulation 0.5 % max. Output voltage adjustment ± 10 % by external resistor Models 90 % typ. Operating temperature –40 ° C to +80 ° C (with derating), optional heatsink Order code I/O isolation voltage 1500 VDC (60 sec.) Safety approvals UL/cUL 60950-1, IEC/EN 60950-1 (pending) TEN 50-2410WI TEN 50-2411WI Casing metal, with insulated baseplate TEN 50-2412WI www.tracopower.com/products/ten50wi.pdf TEN 50-2413WI TEN 50-2415WI 24 VDC 2080 mA TEN 50-4810WI TEN 50-4811WI 3.3 VDC 5 VDC 10000 mA 10000 mA 2.54 (0.4) 5 3 Pin-Out (0.8) Bottom View 10.16 4 20.32 (0.1) (2.0) 1 2 6 2.54 (0.1) 5.5 11.0 45.72 (1.8) (0.22) (0.43) (0.4) (0.2) 10.16 5.08 2.54 50.8 25.4 (1.0) Full datasheet (0.1) Efficiency Pin Single 1 +Vin(Vcc) 2 -Vin(GND) 3 Remote On/Off 4 +Vout 5 -Vout 6 Trim TEN 50-4812WI Input voltage 18-36 VDC 36-75 VDC Output voltage Output current max. 3.3 VDC 5 VDC 10000 mA 10000 mA 12 VDC 4170 mA 15 VDC 3330 mA 12 VDC 4170 mA TEN 50-4813WI 15 VDC 3330 mA TEN 50-4815WI 24 VDC 2080 mA TEN-60N Series 60W DC/DC Converter CB Highest power density 60W converter Wide 2:1 input voltage Highest efficiency up to 92 % Adjustable output voltage, remote On/Off Input filter to meet EN55022, class A Scheme Specifications Line regulation 0.2 % max. Load regulation single output models: 0.5 % , dual output models 1 % Output voltage adjustment ± 10 % by external resistor Order code Input voltage Output voltage Output current max. 3.3 VDC 5 VDC 12000 mA 12000 mA 12 VDC 5000 mA 15 VDC 4000 mA 91 % typ. Operating temperature –40 ° C to +85 ° C (with derating) , optional heatsink TEN 60-1210N TEN 60-1211N I/O isolation voltage 1500 VDC (60 sec.) TEN 60-1212N Safety approvals UL/cUL 60950-1, IEC/EN 60950-1 (pending) TEN 60-1213N Casing metal,6-side shielded with insulated baseplate TEN 60-1215N 24 VDC 2500 mA Full datasheet www.tracopower.com/products/ten60n.pdf TEN 60-1222N ± 12 VDC ± 2500 mA TEN 60-1223N ± 15 VDC ± 2000 mA TEN 60-2410N TEN 60-2411N 3.3 VDC 5 VDC 12000 mA 12000 mA 12 VDC 5000 mA 15 VDC 4000 mA 3 2.54 5 (0.4) 6 5.5 www.tracopower.com (0.22) (0.43) 2.54 (0.1) 10.2 45.72 (1.8) 25.4 (1.0) Bottom View (0.8) 4 10.16 1 2 20.32 (0.1) 2.54 (0.4) (0.2) 10.16 5.08 (2.0) (0.1) Efficiency 50.8 8 Models 9-18 VDC TEN 60-2412N Pin-Out Pin Single Dual 1 +Vin(Vcc) +Vin(Vcc) TEN 60-2413N 18-36 VDC TEN 60-2415N 24 VDC 2500 mA TEN 60-2422N ± 12 VDC ± 2500 mA 2 -Vin(GND) -Vin(GND) TEN 60-2423N ± 15 VDC ± 2000 mA 3 Remote On/Off Remote On/Off 4 +Vout +Vout TEN 60-4810N TEN 60-4811N 3.3 VDC 5 VDC 12000 mA 12000 mA 5 -Vout Common TEN 60-4812N 12 VDC 5000 mA -Vout TEN 60-4813N 15 VDC 4000 mA 6 Trim 36-75 VDC TEN 60-4815N 24 VDC 2500 mA TEN 60-4822N ± 12 VDC ± 2500 mA TEN 60-4823N ± 15 VDC ± 2000 mA TEN-60WIN Series 60W DC/DC Converter CB Highest power density 60W converter Ultra wide 4:1 input voltage Highest efficiency up to 92 % Low input current at no load Input filter to meet EN55022, class A Scheme Specifications Line regulation 0.2 % max. Load regulation single output models: 0.5 %, dual output models 1 % Output voltage adjustment ± 10 % by external resistor (single output models) Models 91 % typ. Operating temperature –40 ° C to +85 ° C (with derating, tba) optional heatsink Order code I/O isolation voltage 1500 VDC (60 sec.) Safety approvals UL/cUL 60950-1, IEC/EN 60950-1 (pending) TEN 60-2410WIN TEN 60-2411WIN Casing shielded metal with insulated baseplate TEN 60-2412WIN Full datasheet www.tracopower.com/products/ten60win.pdf TEN 60-2413WIN 2.54 (0.4) 5 3 6 25.4 (1.0) Bottom View Pin-Out (0.8) 4 2.54 (0.1) 5.5 11.0 45.72 (1.8) (0.22) (0.43) 1 2 10.16 (0.1) (2.0) 20.32 (0.4) (0.2) 10.16 5.08 2.54 50.8 (0.1) Efficiency Pin Single Dual 1 +Vin(Vcc) +Vin(Vcc) 2 -Vin(GND) -Vin(GND) 3 Remote On/Off Remote On/Off 4 +Vout +Vout 5 -Vout Common 6 Trim -Vout Input voltage 9-36 VDC Output voltage Output current max. 3.3 VDC 5 VDC 12000 mA 12000 mA 12 VDC 5000 mA 15 VDC 4000 mA TEN 60-2415WIN 24 VDC 2500 mA TEN 60-2422WIN ± 12 VDC ± 2500 mA TEN 60-2423WIN ± 15 VDC ± 2000 mA TEN 60-4810WIN TEN 60-4811WIN 3.3 VDC 5 VDC 12000 mA 12000 mA 12 VDC 5000 mA 15 VDC 4000 mA TEN 60-4812WIN TEN 60-4813WIN 18-75 VDC TEN 60-4815WIN 24 VDC 2500 mA TEN 60-4822WIN ± 12 VDC ± 2500 mA TEN 60-4823WIN ± 15 VDC ± 2000 mA TEQ-100WIR Series 100W DC/DC Converter CB High power block with excellent thermal convection Operating temperature -40 °C up to +85 °C without derating! Increased shock & vibration resistance Ultra wide 4:1 input voltage EN 50155 approval for railway applications Excellent efficiency up to 93 % Input filter to meet EN 55022, class A Specifications Scheme Line regulation 0.2 % max. Load regulation 0.3 % max. Output voltage +10 % / -20 % adjustable by internal potentiometer Conducted EMI EN55022, class A (internal filter) Efficiency 92 % typ. TEQ 100-2412WIR TEQ 100-2415WIR Operating temperature –40 ° C to +85 ° C without derating Thermal protection shutdown at 115 °C I/O isolation voltage 2250 VDC (60 sec.), basic insulation Safety approvals Full datasheet Models Input voltage Output voltage Output current max. 9-36 VDC 12 VDC 24 VDC 8.4 A 4.2 A TEQ 100-2416WIR 28 VDC 3.6 A TEQ 100-2418WIR 48 VDC 2.1 A UL/cUL 60950-1, IEC/EN 60950-1, EN 50155 (Railway) - pending TEQ 100-4812WIR TEQ 100-4815WIR 12 VDC 24 VDC 8.4 A 4.2 A www.tracopower.com/products/teq100wir.pdf TEQ 100-4816WIR 28 VDC 3.6 A TEQ 100-4818WIR 48 VDC 2.1 A TEQ 100-7212WIR TEQ 100-7215WIR 12 VDC 24 VDC 8.4 A 4.2 A TEQ 100-7216WIR 28 VDC 3.6 A TEQ 100-7218WIR 48 VDC 2.1 A 99.6 (3.92) Order code 18-75 VDC 43-160 VDC Optional DIN-rail mount adapter 88 .9 ( 3.5 0) 1.6 10 ) (4.0 www.tracopower.com 9 TEQ-160WIR Series 144 to 182W DC/DC Converter CB High power block with excellent thermal convection Operating temperature -40 °C up to +70 °C without derating! Increased shock & vibration resistance Ultra wide 4:1 input voltage EN 50155 approval for railway applications Excellent efficiency up to 93 % Input filter to meet EN 55022, class A Scheme Specifications Line regulation 0.2 % max. Load regulation 0.3 % max. Output voltage +10 % / -20 % adjustable by internal potentiometer Conducted EMI EN55022, class A (internal filter) Efficiency 92 % typ. Operating temperature –40 ° C to +70 ° C without derating Thermal protection shutdown at 115 °C Order code I/O isolation voltage 2250 VDC (60 sec.), basic insulation Safety approvals UL/cUL 60950-1, IEC/EN 60950-1, EN 50155 (Railway) - pending TEQ 160-4812WIR TEQ 160-4815WIR Full datasheet www.tracopower.com/products/teq160wir.pdf TEQ 160-4816WIR 28 VDC 5.5 A TEQ 160-4818WIR 48 VDC 3.2 A 12 VDC 24 VDC 15 A 7.5 A TEQ 160-7216WIR 28 VDC 6.5 A TEQ 160-7218WIR 48 VDC 3.8 A Models 99.6 (3.92) TEQ 160-7212WIR TEQ 160-7215WIR Input voltage Output voltage Output current max. 18-75 VDC 12 VDC 24 VDC 13 A 6.5 A 43-160 VDC Optional DIN-rail mount adapter 88 .9 ( 3.5 0) 1.6 10 ) (4.0 TEQ-200WIR Series 180 to 240W DC/DC Converter High power block with excellent thermal convection Operating temperature -40 °C up to +55 °C without derating! Increased shock & vibration resistance Ultra wide 4:1 input voltage EN 50155 approval for railway applications Excellent efficiency up to 93 % Input filter to meet EN 55022, class A CB Scheme Specifications Line regulation 0.2 % max. Load regulation 0.3 % max. Output voltage +10 % / -20 % adjustable by internal potentiometer Conducted EMI EN55022, class A (internal filter) Efficiency 92 % typ. Operating temperature –40 ° C to +55 ° C without derating Thermal protection shutdown at 115 °C Order code I/O isolation voltage 2250 VDC (60 sec.), basic insulation Safety approvals UL/cUL 60950-1, IEC/EN 60950-1, EN 50155 (Railway) - pending TEQ 200-4812WIR TEQ 200-4815WIR Full datasheet www.tracopower.com/products/teq200wir.pdf TEQ 200-4816WIR 28 VDC 7.5 A TEQ 200-4818WIR 48 VDC 4.5 A 12 VDC 24 VDC 20 A 10 A Models 99.6 (3.92) TEQ 200-7212WIR TEQ 200-7215WIR 88 .9 ( 10 www.tracopower.com 3.5 0) 1.6 10 (4 Output voltage Output current max. 18-75 VDC 12 VDC 24 VDC 18 A 9.0 A 43-160 VDC TEQ 200-7216WIR 28 VDC 8.5 A TEQ 200-7218WIR 48 VDC 5.0 A Optional DIN-rail mount adapter .0) Input voltage TMSB-2 Series 2W Power Module AC/DC CB Standby power module to comply with ErP directive No load input power < 30mW Suitable to drive relays, solenoids, capacitive loads and LED’s Constant power characteristics at 2W (no current limitation) Constant voltage auxiliary outputs 3.3 and 5 VDC Scheme Specifications Input voltage range 85-264 VAC, 47-440 Hz Line regulation 1.0 % Load regulation 1.0 % Efficiency 70 % typ. EMI suppression EN55022, class B, EN 55014-1 Operating temperature –30 ° C to +70 ° C Safety approvals IEC/EN 60950-1, UL 60950-1, EN 60335-1 - pending Degree of protection safety class II Full datasheet www.tracopower.com/products/tmsb2.pdf Models 7 3.00 21.00 (0.83) (0.12) (0.55) 36.5 (1.44) 14.00 7.50 1 28.4 (1.12) Output current max. 8 VDC 14 VDC 250 mA 143 mA TMSB 2-124 24 VDC 83 mA 8 VDC 250 mA TMSB 2-285 2) 8 VDC 250 mA TMSB 2-2143 1) 14 VDC 143 mA TMSB 2-2145 2) 14 VDC 143 mA TMSB 2-283 1) Pin Single Dual 1 NC NC 2 NC NC 3 +Vout +Vout1 4 -Vout Common 5 No Pin +Vout2 6 AC(N) AC(N) 7 AC(L) AC(L) 2W 1) Auxiliary output 3.3 VDC 2) Auxiliary output 5 VDC Output characteristics: (e.g. TMSB 2-108) Output Voltage (VDC) 4.0 (0.16) 6 3.75 14.8 (0.58) Bottom view (0.30) 7.50 25.25 (0.99) 5 (0.30) 4 Output voltage TMSB 2-108 TMSB 2-114 Pin-Out 2x3.75 (2x0.15) 3 (0.15) 2 Output power max. Order code 10 constant power area constant voltage 8 6 4 2 0 0 100 200 300 400 500 600 700 800 900 Output Current (mA) TMM-24 Series 24W Medical AC/DC Power Modules AC/DC Medical safety to IEC/EN60601-1 3rd edition, 2 x MOPP Extended operating temp.range -40 °C to +60 °C at full load Fully encapsulated low profile plastic case Ready to meet ErP directive, <0.3W no load power consumption PCB-mount version or chassis-mount version with DC-OK LED-indicator CB Scheme Specifications Input voltage range 85–264 VAC, 47–440 Hz Line regulation 0.5 % Load regulation single output models: 0.5 %, dual ouput models: 2.5 % Efficiency 82 % typ. EMI suppression EN55022, class B Operating temperature –40 ° C to +80 ° C, derating above 60 °C Safety approvals (pending) IEC/EN 60601-1 3rd edition, 2 x MOPP, UL 60601-1 IEC/EN 609501-1, UL60950-1, UL 508 for chassis mount ver. Degree of protection safety class II prepared Casing fully encapsulated plastic, PCB or chassis mount Full datasheet Models 3 4 1000 mA TMM 24212 ± 12 VDC ± 1000 mA TMM 24215 ± 15 VDC ± 800 mA 4.0 5.0 11.8 (0.16) (0.20 (0.46) 4 5 6 Pin-Out 7 76.0 (2.99) 96.0 (3.78) 86.0 (3.39) 74.0 (2.91) 62.0 (2.44) Top view 40.0 (1.57) Bottom view 6.0 Pin Single Dual 1 AC (N) AC (N) 2 AC (L) AC (L) 3 No Pin / NC No Pin / NC 4 -Vout -Vout 5 No Pin / NC Common 6 +Vout +Vout 7 No Pin / NC No Pin / NC 10.0 (0.39) 2 5.0 5.0 0.5 (0.02) 1 (0.20) 27.0 (1.06) (0.20) 6.0 20.32 (0.80) (0.24) 1 2 1600 mA 24 VDC 19.9 (0.78) 2 x M3.5 THD 15 VDC 24W TMM 24124 4 x ø3.5 19.9 (0.78) 3000 mA 2000 mA 23.3 (0.92) 19.3 (0.76) 5.0 (0.45) 5 VDC 12 VDC (0.20) 11.43 5 TMM 24115 54.0 (2.13) 46.0 (1.81) (0.45) Output current max. * for chassis mount version add suffix C www.tracopower.com/products/tmm24.pdf 11.43 Output voltage TMM 24105 TMM 24112 54.0 (2.13) 6 Output power max. Order code* (0.24) www.tracopower.com 11 TMM-40 Series 40W Medical AC/DC Power Modules AC/DC Medical safety to IEC/EN60601-1 3rd edition, 2 x MOPP Extended operating temp.range -40 °C to +60 °C at full load Fully encapsulated low profile plastic case Ready to meet ErP directive, <0.3W no load power consumption PCB-mount version or chassis-mount version with DC-OK LED CB Scheme Specifications Input voltage range 85–264 VAC, 47–440 Hz Line regulation 0.5 % Load regulation -Single output models: 1 %, dual ouput models: 2 % Efficiency 84 % typ. Order code* EMI suppression EN55022, class B Operating temperature –40 ° C to +80 ° C, derating above 60 °C TMM 40105 TMM 40112 Safety approvals (pending) IEC/EN 60601-1 3rd edition, 2 x MOPP, UL 60601-1 IEC/EN 609501-1, UL60950-1, UL 508 for chassis mount ver. TMM 40115 TMM 40124 24 VDC 1660 mA Degree of protection Safety class II prepared TMM 40212 ± 12 VDC ± 1660 mA Casing Fully encapsulated plastic, PCB or chassis mount TMM 40215 ± 15 VDC ± 1330 mA Full datasheet 63.8 (2.51) (0.50) 30.0 (1.18) 5 4 6.9 5.0 11.8 (0.27) (0.20) (0.46) 4 5 6 7 92.0 (3.62) 112.0 (4.41) 100.0 (3.94) 88.9 (3.50) 81.3 (3.20) 27.5 (1.08) 0.5 (0.02) 2660 mA Pin Single Dual 1 AC (N) AC (N) 2 AC (L) AC (L) 3 No Pin / NC No Pin / NC 4 -Vout -Vout 5 No Pin / NC Common 6 +Vout +Vout 7 No Pin / NC No Pin / NC 1 6.0 2 6.0 (0.24) 10.0 (0.24) 27.94 (1.10) (0.39) 5.0 3.8 (0.15) 5.0 (0.20) 27.94 (1.10) 15 VDC (0.20) 27.65 (1.09) Top view 1 2 8000 mA 3330 mA 40 W 4 x ø3.5 2 x M3.5 THD 5 VDC 12 VDC Pin-Out 3 Bottom view Output current max. 34.1 (1.34) 50.0 (1.97) 5.0 12.70 (0.50) Output voltage (0.20) 12.70 Output power max. * for chassis mount version add suffix C www.tracopower.com/products/tmm40.pdf 63.5 (2.50) 6 Models 31.75 (1.25) TMM-60 Series 60W Medical AC/DC Power Modules AC/DC Medical safety to IEC/EN60601-1 3rd edition, 2 x MOPP Extended operating temp.range -40 °C to +60 °C at full load Fully encapsulated low profile plastic case Ready to meet ErP directive, <0.3W no load power consumption PCB-mount version or chassis-mount version with DC-OK LED CB Scheme Specifications Input voltage range 85–264 VAC, 47–440 Hz Line regulation 0.2 % Load regulation 0.5 % Efficiency 87 % typ. EMI suppression EN55022, class B Order code* Operating temperature –40 ° C to +80 ° C, derating above 60 °C Safety approvals (pending) IEC/EN 60601-1 3rd edition, 2 x MOPP, UL 60601-1 IEC/EN 609501-1, UL60950-1, UL 508 for chassis mount ver. TMM 60105 TMM 60112 Models Degree of protection safety class II prepared Casing fully encapsulated plastic, PCB or chassis mount Full datasheet 34.0 (1.34) 4 3 15 VDC 4000 mA 24 VDC 2500 mA TMM 60148 48 VDC 1250 mA 38.0 (1.50) 8.9 5.0 11.8 (0.35) (0.20) (0.46) 4 5 6 Pin-Out 7 92.0 (3.62) 112.0 (4.41) 100.0 (3.94) 89.0 (3.50) 81.3 (3.20) 27.5 (1.08) Top view 33.75 (1.33) 12 www.tracopower.com 1 2 (0.39) 6.0 (0.24) 6.0 0.5 (0.02) (0.24) 3.85 5.0 27.94 (1.10) (0.15) 5.55 (0.219) 27.94 (1.10) 10.0 1 2 (0.20) 27.05 (1.065) 2 x M3.5 THD 10000 mA 5000 mA 60 W 4 x ø3.5 Bottom view 5.1 VDC 12 VDC * for chassis mount version add suffix C 50.0 (1.97) 5.0 (0.50) Output current max. (0.20) 12.70 (0.50) Output voltage TMM 60124 67.8 (2.67) 12.70 6 TMM 60115 www.tracopower.com/products/tmm60.pdf 67.5 (2.66) Output power max. Pin Single 1 AC (N) 2 AC (L) 3 No Pin / NC 4 -Vout 5 No Pin / NC 6 +Vout 7 No Pin / NC TML-100C Series 100W AC/DC Power Module CB Fully encapsulated compact low profile plastic casing Active power factor correction High efficiency up 93 % Safety class II prepared DC-OK LED indicator EMI meets IEC/EN 61000-6-3 Remote On/Off control input Adjustable output voltage Scheme Models Specifications Output power max. 90–264 VAC, 47–63 Hz Order code Output voltage Output current max. Line regulation 1.0 % max. 85 W Load regulation 1.0 % TML 100-112C TML 100-115C 12 VDC 15 VDC 7000 mA 5660 mA EMI suppression IEC/EN 61000-6-3 90 % typ. TML 100-124C TML 100-148C 100 W Efficiency 24 VDC 48 VDC 4200 mA 2100 mA Operating temperature –25 ° C to +70 ° C above 50°C derating 2%/K Safety standards / approvals (pending) IEC/EN 60950-1, UL/cUL 60950-1, UL 508 Degree of protection safety class II prepared Casing plastic (UL 94V-0 rated) Full datasheet www.tracopower.com/products/tml.pdf 36.6 (1.46) Input voltage range 4 62.0 (2.48) 1 5 2 6 Top view 3 7 8 140.0 (5.6) TIW Series 24W AC/DC Flush Box Mount CB Easy installation into standard flush boxes Dust and waterproof to IP 67 Ready to meet ERP directive, <0.3 W no load power consumption, high efficiency across full load range Regulated output voltage Safety approvals to IEC/EN/UL 60950-1 and EN 60335-1 Protection class II Short circuit and overload protection prepared Scheme Models Line regulation 1.0 % max. Load regulation 2.0 % EMI suppression IEC/EN 61000-6-3 EMC immunity IEC/EN 61000-6-2 Efficiency 80 % typ. Operating temperature –25 ° C to +50 ° C Safety standards / approvals (pending) IEC/EN/UL 60950-1, EN 50178, EN 60335-1, CB-report Degree of protection class II as per IEC/EN 61140 Casing IP 67, plastic (UL 94V-0 rated) Full datasheet www.tracopower.com/products/tiw.pdf Order code Output power Output voltage Output current max. 24 W 24 W 12 VDC 24 VDC 2000 mA 1000 mA TIW 24-112 TIW 24-124 8mm 90–264 VAC, 47–63 Hz, 90-370 VDC 570mm (+30/-0) Input voltage range 40mm Specifications Flat 2-core cable 16 -18AWG. Outer insulation 3.5mm x 7.0mm typ. 55 4.0 .0 N L 3.2 R .5 27 20.5 52.0 20.5 Input 3.2 Output +- 4.0 Ø 1 .8 23.6 12.5 12.5 48.0 Ø 1. 8 200mm (+20/-0) Side View Bottm View 20AWG/BLACK 5.0±2 20AWG/RED Tolerances: ±0.2mm 5.7 Top Side www.tracopower.com 13 TPP Series 100-150W Medical AC/DC Power Supply AC/DC CB Highest power density open frame power supply 100 W in 2” x 3” and 150 W in 2” x 4” Medical safety approval according IEC 60601-1 3rd edition 2 x MOPP Ready to meet ErP directive: Highest efficiency 89 % to 92 % across 10 %-100 % load range, <0.3 W no load power consumption Safety class II prepared Specifications Scheme Models Input voltage range 90–264 VAC, 47–63 Hz Line regulation 0.3 % max. Load regulation 0.5 % TPP 100-105 TPP 100-112 Ripple & noise (20MHz) < 1 % of Vout TPP 100-115 EMI suppression EN 55022 class B TPP 100-124 EMC immunity EN 61000-6-2 Efficiency Output power max. Order code Output voltage Output current max. 5 VDC 12 VDC 20.0 A 8.34 A 15 VDC 6.67 A 24 VDC 4.17 A TPP 100-128 28 VDC 3.58 A 92 % typ. TPP 100-148 48 VDC 2.09 A Operating temperature –20 ° C to +70 ° C Safety standards / approvals IEC 60601-1 3rd edition 2 x MOPP, UL 60601-1 IEC/EN 60950-1, UL 60950-1 TPP 150-112 TPP 150-115 12 VDC 15 VDC 12.5 A 10.0 A TPP 150-124 24 VDC 6.25 A Degree of protection Safety class II prepared TPP 150-136 36 VDC 4.17 A Casing Open frame with pin connector TPP 150-148 48 VDC 3.13 A Full datasheet www.tracopower.com/products/tpp.pdf 100 W 150 W TSP/TSPC DIN-Rail Battery Controller Modules All modules provide a professional battery control function to charge and monitor external lead-acid batteries. These are to build professional DC-UPS systems using TSP and TSP-WR series power supplies. Battery protection against over-voltage, deep discharge, short circuit and reverse connection Remote On/Off for battery and power supply Alarm outputs for input, output and battery condition Controlled end of charge voltage by external battery temperature sensor TSPC 240UPS 24 VDC / 240 W power supply with integrated battery controller TSP-BCMU360 Universal battery controller module, 24 / 48 VDC step up from 12 V batteries Models Order code Output 115 / 230 VAC (selection switch) 24 VDC / 10 A (12A boost) 12 V / 1 A Any 24 VDC or 48 VDC Input voltage, 240 W (360 W boost) 12 V / 1.2 A TSP-BCM12 TSP 070-112 or TSP 140-112 12 VDC 12 V / 1.4 A TSP-BCM24 TSP 090-124 or TSP 180-124 (-WR) or TSP 360-124(-WR) 24 VDC 24 V / 3.0 A TSP 600-124(-WR) 24 VDC 24 V / 6.4 A TSP 090-148 or TSP 180-148 or TSP 360-148 48 VDC 48 V / 1.4 A TSP 600-148 48 VDC 48 V / 3.0 A TSPC 240UPS TSP-BCMU360 TSP-BCM24A TSP-BCM48 TSP-BCM Battery controller modules for TSP power supplies, for 12, 24 and 48 VDC output voltage systems 14 www.tracopower.com Battery / max. charging current Input TSP-BCM24A TFP Series 250-750W DIN-Rail C B CCBB Robust low profile metal casing Extended operating temperature range -40 to +70 °C Boost power 150 % / 5s, Peak power 300 % / 20ms Extended monitoring and control modules Optional CAN and LAN interface with current share function Optional battery charger module and DC-UPS module Excellent efficiency up to 93 % Atex, IECEx and HazLoc approvals Specifications Scheme Scheme Scheme AC/DC IP67 IP67 UL 508 UL 508 Models Output power nom. Input voltage range 85–264 VAC, 45–440 Hz, 90-350 VDC Order code Output voltage Output current nom. Line regulation 0.5 % max. 250 W Load regulation 1.0 % TFP 250-124 TFP 250-148 24 VDC 48 VDC 10 A 5 A Ripple & noise (20 MHz) <100 mVp-p TFP 500-124 500 W 24 VDC 20 A EMI suppression IEC/EN 61000-6-3, EN 61204-3 TFP 500-148 48 VDC 10 A EMC immunity IEC/EN 61000-6-2, EN 61204-3 TFP 750-124 24 VDC 30 A Efficiency 92 % typ. TFP 750-148 48 VDC 15 A 750 W Options: -CS Active current share module Operating temperature –40 ° C to +70 ° C, above 60 °C derating 2.5 %/K Safety standards / approvals IEC/EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1-03 UL 508, CSA-C22.2 No.107, EN 60204-1, EN 61552-2-4 IEC/EN 60079-15 Degree of protection class I as per IEC/EN 61140 -BC Battery charger moduel Shock 25g acc. IEC 60068-2-27 -UPS DC-UPS system module Vibration 2g acc. IEC 60068-2-6 Casing alluminium / stainless steel Full datasheet www.tracopower.com/products/tfp.pdf -CAN CAN-bus interface and current share function -NET LAN inferface and current share function For complete product range see online Selection Guide 2012 www.tracopower.com/products/sg.html www.tracopower.com 15 TRACO ELECTRONIC AG 1, Jenatschstrasse · P.O. Box CH-8027 Zurich · Switzerland Tel. +41 43 311 4511 · Fax +41 43 311 4545 [email protected] · www.tracopower.com