SEMiX191KD16s - TOTEM ELECTRO

SEMiX191KD16s
Absolute Maximum Ratings
Symbol
Conditions
Values
Unit
A
Recitifier Diode
Tc = 85 °C
190
Tc = 100 °C
145
A
Tj = 25 °C
6000
A
Tj = 130 °C
5000
A
Tj = 25 °C
180000
A²s
Tj = 130 °C
125000
A²s
VRSM
1700
V
VRRM
1600
V
-40 ... 130
°C
-40 ... 125
°C
1 min
4000
V
1s
4800
V
IFAV
IFSM
i2t
SEMiX® 1s
sin. 180°
10 ms
10 ms
Tj
Rectifier Diode Module
Module
Tstg
SEMiX191KD16s
Visol
Features
Characteristics
Terminal height 17 mm
Chips soldered directly to isolated
substrate
Symbol
Typical Applications*
• Input Bridge Rectifier for AC/DC motor
control
• Power supply
AC sinus 50Hz
Conditions
min.
typ.
max.
Unit
Diode
VF
Tj = 25 °C, IF = 500 A
1.5
V
V(TO)
Tj = 130 °C
0.85
V
rT
Tj = 130 °C
0.95
m
IRD
Tj = 130 °C, VRD = VRRM
Rth(j-c)
per diode
Rth(j-c)
per diode
12
mA
K/W
K/W
sin. 180
0.18
K/W
K/W
Module
Rth(c-s)
per chip
K/W
per module
0.075
K/W
Ms
to heat sink (M5)
3
5
Nm
Mt
to terminals (M6)
2.5
5
Nm
5 * 9,81
m/s²
a
w
145
g
KD
© by SEMIKRON
Rev. 2 – 13.12.2012
1
SEMiX191KD16s
Fig. 1L: Power dissipation per thyristor/diode vs. on-state
current
Fig. 1R: Power dissipation per thyristor/diode vs.
ambient temperature
Fig. 3L: Power dissipation of two modules vs. direct
current
Fig. 3R: Power dissipation of two modules vs. case
temperature
Fig. 4L: Power dissipation of three modules vs. direct
current
Fig. 4R: Power dissipation of three modules vs. case
temperature
2
Rev. 2 – 13.12.2012
© by SEMIKRON
SEMiX191KD16s
Fig. 6: Transient thermal impedance vs. time
Fig. 7: On-state characteristics
Fig. 8: Surge overload current vs. time
© by SEMIKRON
Rev. 2 – 13.12.2012
3
SEMiX191KD16s
spring configuration
SEMiX 1s
This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX
* The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested
for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is
subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff.
4
Rev. 2 – 13.12.2012
© by SEMIKRON