FZ06BIA045FH02 preliminary datasheet flowSOL BI 600V/35A Features flow0 housing ● High efficiency ● Ultra fast switching frequency ● Low inductive design ● Open emitter ● SiC in boost and H bridge Target Applications Schematic ● Transformerless solar inverters Types ● FZ06BIA045FH02 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 600 V 36 49 A 370 A 360 A2s 42 63 W Tjmax 150 °C VDS 600 V 30 37 A 230 A 92 139 W Bypass Diode Repetitive peak reverse voltage VRRM Forward current per diode IFAV Surge forward current IFSM I2t-value I2t Power dissipation per Diode Ptot Maximum Junction Temperature DC current Th=80°C Tc=80°C tp=10ms Tj=25°C Tj=Tjmax Th=80°C Tc=80°C Input Boost MOSFET Drain to source breakdown voltage DC drain current Pulsed drain current ID IDpulse Tj=Tjmax Th=80°C Tc=80°C tp limited by Tjmax Tj=Tjmax Th=80°C Tc=80°C Power dissipation Ptot Gate-source peak voltage VGS ±20 V Tjmax 150 °C Maximum Junction Temperature Copyright by Vincotech 1 Revision: 3 FZ06BIA045FH02 preliminary datasheet Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 600 V 20 24 A 70 A 41 62 W 175 °C 600 V Input Boost Diode Peak Repetitive Reverse Voltage DC forward current VRRM Tj=25°C IF Tj=Tjmax Repetitive peak forward current IFRM tp limited by Tjmax Power dissipation Ptot Tj=Tjmax Maximum Junction Temperature Th=80°C Tc=80°C Th=80°C Tc=80°C Tjmax Buck Diode Peak Repetitive Reverse Voltage DC forward current VRRM IF Tj=25°C Tj=Tjmax Th=80°C Tc=80°C 13 16 A Repetitive peak forward current IFRM tp limited by Tjmax Tc=100°C 35 A Power dissipation per Diode Ptot Tj=Tjmax Th=80°C Tc=80°C 29 44 W 175 °C 600 V Maximum Junction Temperature Tjmax Buck MOSFET Drain to source breakdown voltage DC drain current Pulsed drain current VDS ID IDpulse Tj=Tjmax Th=80°C Tc=80°C 30 tp limited by Tjmax Tc=25°C 230 A Tj=Tjmax Th=80°C Tc=80°C 94 142 W 37 A Power dissipation Ptot Gate-source peak voltage Vgs ±20 V Tjmax 150 °C VCE 600 V 40 40 A 150 A 86 131 W ±20 V 6 360 μs V 175 °C Maximum Junction Temperature Boost IGBT Collector-emitter break down voltage DC collector current IC Tj=Tjmax Repetitive peak collector current ICpuls tp limited by Tjmax Power dissipation per IGBT Ptot Tj=Tjmax Gate-emitter peak voltage VGE Short circuit ratings tSC VCC Maximum Junction Temperature Copyright by Vincotech Tj≤150°C VGE=15V Tjmax 2 Th=80°C Tc=80°C Th=80°C Tc=80°C Revision: 3 FZ06BIA045FH02 preliminary datasheet Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 600 V Boost Inverse Diode Peak Repetitive Reverse Voltage DC forward current VRRM IF Tc=25°C Tj=Tjmax Repetitive peak forward current IFRM tp limited by Tjmax Power dissipation per Diode Ptot Tj=Tjmax Th=80°C 16 Tc=80°C 20 A 20 A 32 49 W Tjmax 175 °C Storage temperature Tstg -40…+125 °C Operation temperature under switching condition Top -40…+(Tjmax - 25) °C 4000 V Creepage distance min 12,7 mm Clearance min 12,7 mm Maximum Junction Temperature Th=80°C Tc=80°C Thermal Properties Insulation Properties Insulation voltage Copyright by Vincotech Vis t=2s DC voltage 3 Revision: 3 FZ06BIA045FH02 preliminary datasheet Characteristic Values Parameter Conditions Symbol VGE [V] or VGS [V] Vr [V] or VCE [V] or VDS [V] Value IC [A] or IF [A] or ID [A] Unit Tj Min Typ Max Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C 0,7 1,01 0,93 0,86 0,75 0,01 0,01 1,3 Bypass Diode Forward voltage solar inverte Threshold voltage (for power loss calc. only) Vto Slope resistance (for power loss calc. only) rt Reverse current Ir Thermal resistance chip to heatsink per chip RthJH 15 1200 V Ω 0,05 Thermal foil thickness=76um Kunze foil KUALF5 V 1,68 mA K/W Input Boost MOSFET Static drain to source ON resistance Gate threshold voltage RDS(on) V(GS)th 44 10 VGS=VDS 0,003 Gate to Source Leakage Current Igss 20 0 Zero Gate Voltage Drain Current Idss 0 600 Turn On Delay Time Rise Time Turn off delay time Fall time td(ON) tr td(OFF) tf Turn-on energy loss per pulse Eon Turn-off energy loss per pulse Eoff Total gate charge Qg Gate to source charge Qgs Gate to drain charge Qgd Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Thermal resistance chip to heatsink per chip RthJH Rgoff=4 Ω Rgon=4 Ω Rgon=4 Ω 10 400 10 400 15 44 Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C 2,1 0,04 0,09 3 Ω 3,9 200 25000 28 27 5 6 154 167 10 9 0,063 0,072 0,025 0,025 150 V nA nA ns mWs 190 34 nC 51 6800 f=1MHz 0 Tj=25°C 100 pF 320 48 Thermal grease thickness≤50um λ = 1 W/mK 0,76 K/W Input Boost Diode Forward voltage VF Reverse leakage current Irm Peak recovery current trr Reverse recovery charge Qrr Reverse recovered energy Erec Thermal resistance chip to heatsink per chip Copyright by Vincotech 10 400 15 IRRM Reverse recovery time Peak rate of fall of recovery current 16 Rgon=4 Ω 400 10 di(rec)max /dt RthJH Thermal grease thickness≤50um λ = 1 W/mK 15 Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C 1 1,54 1,71 400 16,63 14,68 9,3 10,4 0,058 0,064 0,005 0,006 4244 2752 2,34 4 1,8 V μA A ns μC mWs A/μs K/W Revision: 3 FZ06BIA045FH02 preliminary datasheet Characteristic Values Parameter Conditions Symbol VGE [V] or VGS [V] Vr [V] or VCE [V] or VDS [V] Value IC [A] or IF [A] or ID [A] Tj Unit Min Typ Max 1 1,52 1,64 14 12 7,8 8,8 0,05 0,05 4078 3373 0,008 0,007 1,8 Buck Diode Diode forward voltage Peak reverse recovery current Reverse recovery time Reverse recovered charge Peak rate of fall of recovery current VF 8 IRRM trr Qrr Rgon=4 Ω 400 10 15 di(rec)max /dt Reverse recovered energy Erec Thermal resistance chip to heatsink per chip RthJH Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Thermal grease thickness≤50um λ = 1 W/mK V A ns μC A/μs mWs 3,28 K/W Buck MOSFET Static drain to source ON resistance Rds(on) Gate threshold voltage V(GS)th Gate to Source Leakage Current Zero Gate Voltage Drain Current Turn On Delay Time Rise Time Turn off delay time Fall time 44 10 VDS=VGS Igss 0 20 Idss 0,003 600 0 td(ON) tr td(OFF) tf Turn-on energy loss per pulse Eon Turn-off energy loss per pulse Eoff Total gate charge Qg Gate to source charge Qgs Rgoff=4 Ω Rgon=4 Ω 400 10 15 Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C 2,1 45 90 3 200 25000 31 30 5,4 6 147 158 13,7 10,3 0,063 0,067 0,02 0,03 150 10 400 44 Tj=25°C 34 Gate to drain charge Qgd 51 Input capacitance Ciss 6800 Output capacitance Coss Reverse transfer capacitance Crss Thermal resistance chip to heatsink per chip Copyright by Vincotech RthJH f=1MHz 0 100 Tj=25°C mΩ 3,9 320 V nA nA ns mWs 190 nC pF 48 Thermal grease thickness≤50um λ = 1 W/mK 0,75 5 K/W Revision: 3 FZ06BIA045FH02 preliminary datasheet Characteristic Values Parameter Conditions Symbol VGE [V] or VGS [V] Vr [V] or VCE [V] or VDS [V] Value IC [A] or IF [A] or ID [A] Tj Unit Min Typ Max 5 5,8 6,5 Boost IGBT Gate emitter threshold voltage VGE(th) VCE=VGE 0,0008 Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Tj=25°C Tj=125°C Collector-emitter saturation voltage VCE(sat) 15 Collector-emitter cut-off incl diode ICES 0 600 Gate-emitter leakage current IGES 20 0 Integrated Gate resistor Rgint none Input capacitance Cies 3140 Output capacitance Coss Reverse transfer capacitance Crss Gate charge QGate Thermal resistance chip to heatsink per chip RthJH f=1MHz 50 0 25 15 480 V 1,18 1,21 V 0,03 650 mA nA Ω Tj=25°C 200 Tj=25°C 310 nC 1,1 K/W 1,68 1,63 V pF 93 50 Thermal grease thickness≤50um λ = 1 W/mK Note: For the Boost IGBT only LF switching allowed Boost Inverse Diode Diode forward voltage Thermal resistance chip to heatsink per chip VF RthJH 10 Tj=25°C Tj=125°C Thermal grease thickness≤50um λ = 1 W/mK 2,949 K/W Thermistor Rated resistance* R25 R100 Power dissipation P B(25/100) B-value Tj=25°C Tol. ±5% Tol. ±3% 17,5 22 1486 29,0 kΩ Ω Tj=25°C 210 mW Tj=25°C 4000 K * see details on Thermistor charts on Figure 2. Copyright by Vincotech 6 Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck MOSFET MOSFET 100 100 IC (A) Figure 2 Typical output characteristics IC = f(VCE) IC (A) Figure 1 Typical output characteristics IC = f(VCE) 80 80 60 60 40 40 20 20 0 0 0 1 At tp = Tj = VGE from 2 3 V CE (V) 4 5 0 At tp = Tj = VGE from 250 μs 25 °C 4 V to 14 V in steps of 1 V MOSFET Figure 3 Typical transfer characteristics IC = f(VGE) 1 2 3 4 V CE (V) 250 μs 125 °C 4 V to 14 V in steps of 1 V FRED Figure 4 Typical diode forward current as a function of forward voltage IF = f(VF) 50 5 IF (A) 30 IC (A) Tj = Tjmax-25°C Tj = 25°C 25 40 20 Tj = Tjmax-25°C 30 15 20 10 Tj = 25°C 10 5 0 0 0 At tp = VCE = 1 250 10 2 3 4 5 V GE (V) 6 0 At tp = μs V Copyright by Vincotech 7 0,8 250 1,6 2,4 3,2 V F (V) 4 μs Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck MOSFET MOSFET Figure 6 Typical switching energy losses as a function of gate resistor E = f(RG) 0,16 0,16 E (mWs) E (mWs) Figure 5 Typical switching energy losses as a function of collector current E = f(IC) Eon High T 0,14 0,14 Eon High T 0,12 Eon Low T 0,12 0,10 0,10 Eon Low T 0,08 0,08 Eoff High T 0,06 0,06 Eoff Low T 0,04 0,04 Eoff High T 0,02 0,02 Eoff Low T 0,00 0,00 0 5 10 15 20 25 I C (A) 0 30 With an inductive load at Tj = °C 25/125 VCE = 400 V VGE = 10 V Rgon = 4 Ω Rgoff = 4 Ω 4 8 12 16 R G (W) 20 With an inductive load at Tj = °C 25/125 VCE = 400 V VGE = 10 V IC = 15 A FRED Figure 7 Typical reverse recovery energy loss as a function of collector current Erec = f(Ic) FRED Figure 8 Typical reverse recovery energy loss as a function of gate resistor Erec = f(RG) E (mWs) E (mWs) 0,012 0,014 0,012 0,010 Erec High T 0,010 0,008 Erec Low T Erec Low T 0,008 Erec High T 0,006 0,006 0,004 0,004 0,002 0,002 0,000 0,000 0 5 10 15 20 25 I C (A) 0 30 With an inductive load at Tj = 25/125 °C VCE = 400 V VGE = 10 V Rgon = 4 Ω Copyright by Vincotech 4 8 12 16 R G (W) 20 With an inductive load at Tj = 25/125 °C VCE = 400 V VGE = 10 V IC = 15 A 8 Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck MOSFET MOSFET 1,00 1,00 t (ms) Figure 10 Typical switching times as a function of gate resistor t = f(RG) t (ms) Figure 9 Typical switching times as a function of collector current t = f(IC) tdoff tdoff 0,10 0,10 tf tdon tdon tr 0,01 0,01 tf tr 0,00 0,00 0 5 10 15 20 25 I C (A) 30 0 With an inductive load at Tj = 125 °C VCE = 400 V VGE = 10 V Rgon = 4 Ω Rgoff = 4 Ω 4 8 12 16 R G (W) 20 With an inductive load at Tj = 125 °C VCE = 400 V VGE = 10 V IC = 15 A FRED Figure 11 Typical reverse recovery time as a function of collector current trr = f(Ic) FRED Figure 12 Typical reverse recovery time as a function of IGBT turn on gate resistor trr = f(Rgon) 0,025 t rr(ms) t rr(ms) 0,014 0,012 0,020 trr High T 0,010 trr High T 0,015 0,008 trr Low T trr Low T 0,006 0,010 0,004 0,005 0,002 0,000 0,000 0 At Tj = VCE = VGE = Rgon = 5 25/125 400 10 4 10 15 20 25 I C (A) 0 30 At Tj = VR = IF = VGE = °C V V Ω Copyright by Vincotech 9 4 25/125 400 15 10 8 12 16 R gon (W) 20 °C V A V Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck FRED FRED Figure 14 Typical reverse recovery charge as a function of IGBT turn on gate resistor Qrr = f(Rgon) 0,08 Qrr (mC) Qrr (mC) Figure 13 Typical reverse recovery charge as a function of collector current Qrr = f(IC) 0,07 0,07 0,06 Qrr High T 0,06 Qrr Low T Qrr Low T 0,05 Qrr High T 0,05 0,04 0,04 0,03 0,03 0,02 0,02 0,01 0,01 0,00 At At Tj = VCE = VGE = Rgon = 0 0 5 25/125 400 10 4 10 15 20 25 I C (A) 30 0 At Tj = VR = IF = VGE = °C V V Ω FRED Figure 15 Typical reverse recovery current as a function of collector current IRRM = f(IC) 4 25/125 400 15 10 8 12 16 R g on ( Ω) 20 °C V A V FRED Figure 16 Typical reverse recovery current as a function of IGBT turn on gate resistor IRRM = f(Rgon) 25 IrrM (A) 20 IrrM (A) IRRM Low T IRRM Low T 20 16 IRRM High T 12 15 8 10 4 5 IRRM High T 0 0 0 5 At Tj = VCE = VGE = Rgon = 25/125 400 10 4 10 15 20 25 I C (A) 0 30 At Tj = VR = IF = VGE = °C V V Ω Copyright by Vincotech 10 4 25/125 400 15 10 8 12 16 R gon (W) 20 °C V A V Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck FRED Figure 17 Typical rate of fall of forward and reverse recovery current as a function of collector current dI0/dt,dIrec/dt = f(Ic) 8000 dI0/dt direc / dt (A/ms) 7000 direc / dt (A/ms) FRED Figure 18 Typical rate of fall of forward and reverse recovery current as a function of IGBT turn on gate resistor dI0/dt,dIrec/dt = f(Rgon) dIrec/dtLow T dIrec/dt 6000 dI0/dt dIrec/dt 7000 dIrec/dtLow T 6000 5000 di0/dtHigh T 5000 dIo/dtLow T 4000 4000 3000 dIrec/dtHigh T dIrec/dtHigh T 3000 2000 dI0/dtLow T 2000 1000 1000 dI0/dtHigh T 0 0 0 At Tj = VCE = VGE = Rgon = 5 25/125 400 10 4 10 15 20 25 I C (A) 0 30 At Tj = VR = IF = VGE = °C V V Ω MOSFET Figure 19 IGBT transient thermal impedance as a function of pulse width ZthJH = f(tp) 25/125 400 15 10 8 12 R gon (W) 16 20 °C V A V FRED Figure 20 FRED transient thermal impedance as a function of pulse width ZthJH = f(tp) 101 ZthJH (K/W) ZthJH (K/W) 101 10 4 0 0 10 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 10-1 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 -1 10 10-2 10-2 10-5 10-4 At D= RthJH = 10-3 10-2 10-1 100 t p (s) 10-5 1011 At D= RthJH = tp / T 0,75 K/W 10-4 10-3 3,28 R (C/W) 0,03 0,12 0,41 0,11 0,03 0,04 R (C/W) 0,17 1,04 1,34 0,65 0,08 11 100 t p (s) 1011 K/W FRED thermal model values Copyright by Vincotech 10-1 tp / T IGBT thermal model values Tau (s) 9,3E+00 1,2E+00 1,6E-01 3,8E-02 5,2E-03 3,7E-04 10-2 Tau (s) 9,7E-01 8,5E-02 1,6E-02 2,5E-03 3,2E-04 Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck MOSFET Figure 21 Power dissipation as a function of heatsink temperature Ptot = f(Th) MOSFET Figure 22 Collector current as a function of heatsink temperature IC = f(Th) 50 IC (A) Ptot (W) 240 200 40 160 30 120 20 80 10 40 0 0 0 At Tj = 50 150 100 150 T h ( o C) 0 200 At Tj = VGE = °C FRED Figure 23 Power dissipation as a function of heatsink temperature Ptot = f(Th) 50 150 15 100 150 T h ( o C) 200 °C V FRED Figure 24 Forward current as a function of heatsink temperature IF = f(Th) 20 IF (A) Ptot (W) 60 50 16 40 12 30 8 20 4 10 0 0 0 At Tj = 50 175 100 150 T h ( o C) 0 200 At Tj = °C Copyright by Vincotech 12 50 175 100 150 T h ( o C) 200 °C Revision: 3 FZ06BIA045FH02 preliminary datasheet Buck MOSFET Figure 25 Safe operating area as a function of collector-emitter voltage IC = f(VCE) VGE = f(Qg) 10 VGE (V) 3 IC (A) 10 10uS 10 MOSFET Figure 26 Gate voltage vs Gate charge 8 2 100uS 10mS 100mS 10 120V 1mS DC 1 480V 6 4 100 2 -1 10 0 0 20 40 60 80 100 120 140 160 Q g (nC) 100 At D= Th = VGE = Tj = 1 10 10 2 V CE (V) 103 At IC = single pulse 80 ºC 15 V Tjmax ºC Copyright by Vincotech 13 44 A Revision: 3 FZ06BIA045FH02 preliminary datasheet Boost IGBT Figure 1 Typical output characteristics IC = f(VCE) IGBT Figure 2 Typical output characteristics IC = f(VCE) 70 IC (A) IC (A) 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0,0 At tp = Tj = VGE from 1,0 2,0 3,0 V CE (V) 4,0 5,0 0,0 At tp = Tj = VGE from 250 μs 25 °C 7 V to 17 V in steps of 1 V IGBT Figure 3 Typical transfer characteristics IC = f(VGE) 1,0 2,0 3,0 V CE (V) 4,0 5,0 250 μs 125 °C 7 V to 17 V in steps of 1 V IGBT Figure 4 IGBT transient thermal impedance as a function of pulse width ZthJH = f(tp) 101 ZthJH (K/W) IC (A) 50 40 100 30 Tj = Tjmax-25°C Tj = 25°C D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 20 10-1 10 0 10 0 At tp = VCE = 2 250 10 4 6 8 10 V GE (V) 12 10-5 μs V Copyright by Vincotech -2 At D= RthJH = 14 10-4 tp / T 1,10 10-3 K/W 10-2 10-1 t p (s) 100 101 1 IGBT thermal model values 0,04 6,3E+00 0,17 6,9E-01 0,58 1,0E-01 0,22 1,6E-02 0,05 1,7E-03 Revision: 3 FZ06BIA045FH02 preliminary datasheet Boost IGBT Figure 5 Power dissipation as a function of heatsink temperature Ptot = f(Th) 50 IC (A) 160 Ptot (W) IGBT Figure 6 Collector current as a function of heatsink temperature IC = f(Th) 140 40 120 100 30 80 20 60 40 10 20 0 0 0 At Tj = 50 175 100 150 T h ( o C) 200 0 At Tj = VGE = ºC Copyright by Vincotech 15 50 175 15 100 150 T h ( o C) 200 ºC V Revision: 3 FZ06BIA045FH02 preliminary datasheet Boost Boost Inverse Diode Figure 7 Typical diode forward current as a function of forward voltage IF = f(VF) Boost Inverse Diode Figure 8 Diode transient thermal impedance as a function of pulse width ZthJH = f(tp) 30 ZthJC (K/W) IF (A) 101 Tj = 25°C 25 Tj = Tjmax-25°C 20 0 10 15 10 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 10-1 5 0 -2 10 0 At tp = 0,5 1 1,5 2 3 VF (V) 3,5 10-5 At D= RthJH = μs 250 Boost Inverse Diode Figure 9 Power dissipation as a function of heatsink temperature Ptot = f(Th) 10-4 10-3 tp / T 2,95 K/W 10-2 10-1 100 t p (s) 1011 Boost Inverse Diode Figure 10 Forward current as a function of heatsink temperature IF = f(Th) 25 60 IF (A) Ptot (W) 2,5 50 20 40 15 30 10 20 5 10 0 0 0 At Tj = 50 175 100 150 Th ( o C) 0 200 At Tj = ºC Copyright by Vincotech 16 50 175 100 150 Th ( o C) 200 ºC Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST MOSFET Figure 1 Typical output characteristics ID = f(VDS) BOOST MOSFET Figure 2 Typical output characteristics ID = f(VDS) IC (A) 100 IC(A) 100 80 80 60 60 40 40 20 20 0 0 0 1 At tp = Tj = VGS from 2 3 V CE (V) 4 5 0 At tp = Tj = VGS from 250 μs 25 °C 4 V to 14 V in steps of 1 V BOOST MOSFET Figure 3 Typical transfer characteristics ID = f(VDS) 1 2 3 4 V CE (V) 5 250 μs 126 °C 4 V to 14 V in steps of 1 V BOOST FRED Figure 4 Typical diode forward current as a function of forward voltage IF = f(VF) 50 IF (A) ID (A) 50 Tj = 25°C 40 40 30 30 Tj = Tjmax-25°C Tj = Tjmax-25°C 20 20 Tj = 25°C 10 10 0 0 0 At tp = VDS = 1 250 10 2 3 4 5 0 V GS (V) 6 At tp = μs V Copyright by Vincotech 17 0,8 250 1,6 2,4 3,2 V F (V) 4 μs Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST MOSFET Figure 5 Typical switching energy losses as a function of collector current E = f(ID) BOOST MOSFET Figure 6 Typical switching energy losses as a function of gate resistor E = f(RG) 0,2 E (mWs) E (mWs) 0,2 0,16 Eon High T 0,16 Eon Low T Eon High T 0,12 0,12 Eon Low T Eoff High T 0,08 0,08 Eoff Low T Eoff High T 0,04 0,04 Eoff Low T 0 0 0 5 10 15 20 25 I C (A) 30 0 With an inductive load at Tj = 25/125 °C VDS = 400 V VGS = 10 V Rgon = 4 Ω Rgoff = 4 Ω 4 8 12 RG (Ω ) 16 20 With an inductive load at Tj = 25/125 °C VDS = 400 V VGS = 10 V ID = 15 A BOOST FRED Figure 7 Typical reverse recovery energy loss as a function of collector (drain) current Erec = f(Ic) BOOST FRED Figure 8 Typical reverse recovery energy loss as a function of gate resistor Erec = f(RG) 0,025 E (mWs) E (mWs) 0,018 0,015 0,02 Erec High T 0,012 Erec Low T 0,015 0,009 0,01 0,006 Erec High T 0,005 0,003 Erec Low T 0 0 0 5 10 15 20 25 I C (A) 30 0 With an inductive load at Tj = 25/125 °C VDS = 400 V VGS = 10 V Rgon = 4 Ω Rgoff = 4 Ω Copyright by Vincotech 4 8 12 16 R G( Ω ) 20 With an inductive load at Tj = 25/125 °C VDS = 400 V VGS = 10 V ID = 15 A 18 Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST MOSFET Figure 9 Typical switching times as a function of collector current t = f(ID) BOOST MOSFET Figure 10 Typical switching times as a function of gate resistor t = f(RG) t ( μs) 1 t ( μs) 1 tdoff tdoff tf 0,1 0,1 tdon tdon tf tr 0,01 0,01 tr 0,001 0,001 0 5 10 15 20 25 I D (A) 30 0 With an inductive load at Tj = 125 °C VDS = 400 V VGS = 10 V Rgon = 4 Ω Rgoff = 4 Ω 4 8 12 16 R G( Ω ) 20 With an inductive load at Tj = 125 °C VDS = 400 V VGS = 10 V IC = 15 A BOOST FRED Figure 11 Typical reverse recovery time as a function of collector current trr = f(Ic) BOOST FRED Figure 12 Typical reverse recovery time as a function of MOSFET turn on gate resistor trr = f(Rgon) 0,02 t rr( μs) t rr( μs) 0,03 0,025 trr High T 0,016 trr Low T 0,02 0,012 trr High T 0,015 0,008 trr Low T 0,01 0,004 0,005 0 0 0 At Tj = VCE = VGE = Rgon = 5 25/125 400 10 4 10 15 20 25 I C (A) 30 0 At Tj = VR = IF = VGS = °C V V Ω Copyright by Vincotech 19 4 25/125 400 15 10 8 12 16 R Gon ( Ω ) 20 °C V A V Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST FRED Figure 13 Typical reverse recovery charge as a function of collector current Qrr = f(IC) BOOST FRED Figure 14 Typical reverse recovery charge as a function of MOSFET turn on gate resistor Qrr = f(Rgon) 0,1 Qrr ( μC) Qrr ( μC) 0,1 Qrr High T 0,08 0,08 Qrr High T Qrr Low T 0,06 Qrr Low T 0,06 0,04 0,04 0,02 0 0,02 At 0 At Tj = VCE = VGE = Rgon = 5 25/125 400 10 4 10 15 20 25 I C (A) 30 °C V V Ω BOOST FRED Figure 15 Typical reverse recovery current as a function of collector current IRRM = f(IC) 0 4 At Tj = VR = IF = VGS = 25/125 400 15 10 8 12 R Gon ( Ω) 20 °C V A V BOOST FRED Figure 16 Typical reverse recovery current as a function of MOSFET turn on gate resistor IRRM = f(Rgon) 25 16 IrrM (A) IrrM (A) 30 IRRM Low T 25 IRRM Low T 20 20 IRRM High T 15 15 IRRM High T 10 10 5 5 0 0 0 5 At Tj = VCE = VGE = Rgon = 25/125 400 10 4 10 15 20 25 I C (A) 30 °C V V Ω Copyright by Vincotech 20 0 4 At Tj = VR = IF = VGS = 25/125 400 15 10 8 12 16 R Gon ( Ω ) 20 °C V A V Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST FRED Figure 17 Typical rate of fall of forward and reverse recovery current as a function of collector current dI0/dt,dIrec/dt = f(Ic) BOOST FRED Figure 18 Typical rate of fall of forward and reverse recovery current as a function of MOSFET turn on gate resistor dI0/dt,dIrec/dt = f(Rgon) 6000 direc / dt (A/ μs) 12000 direc / dt (A/ μs) dI0/dt dIrec/dt 5000 dI0/dt dIrec/dt dIrec/dtLow T 10000 di0/dtHigh T dIrec/dtLow T 4000 8000 dI0/dtLow T di0/dtLow T dIrec/dtHigh T 3000 6000 2000 4000 1000 2000 dIrec/dtHigh T 0 0 0 At Tj = VCE = VGE = Rgon = 5 25/125 400 10 4 10 15 20 25 I C (A) 30 0 At Tj = VR = IF = VGS = °C V V Ω BOOST MOSFET Figure 19 IGBT/MOSFET transient thermal impedance as a function of pulse width ZthJH = f(tp) 25/125 400 15 10 8 12 R Gon ( Ω) 16 20 °C V A V BOOST FRED ZthJH (K/W) ZthJH (K/W) 101 0 0 10 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 10-1 10 4 Figure 20 FRED transient thermal impedance as a function of pulse width ZthJH = f(tp) 101 10 dI0/dtHigh T D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 10-1 10-2 -2 10-5 10-4 At D= RthJH = 10-3 10-2 10-1 100 t p (s) 1011 tp / T 0,76 K/W 10-5 10-4 At D= RthJH = 2,34 10-3 R (C/W) 3,25E-02 1,22E-01 4,26E-01 1,17E-01 3,10E-02 3,30E-02 R (C/W) 1,02E-01 4,95E-01 9,89E-01 4,87E-01 2,67E-01 21 100 t p (s) 1011 K/W FRED thermal model values Copyright by Vincotech 10-1 tp / T IGBT thermal model values Tau (s) 9,97E+00 1,22E+00 1,80E-01 4,70E-02 5,89E-03 4,04E-04 10-2 Tau (s) 2,89E+00 3,44E-01 7,04E-02 1,00E-02 1,61E-03 Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST MOSFET Figure 21 Power dissipation as a function of heatsink temperature Ptot = f(Th) BOOST MOSFET Figure 22 Collector/Drain current as a function of heatsink temperature IC = f(Th) 240 IC (A) Ptot (W) 50 200 40 160 30 120 20 80 10 40 0 0 0 At Tj = 50 150 100 150 Th ( o C) 200 0 At Tj = VGS = ºC BOOST FRED Figure 23 Power dissipation as a function of heatsink temperature Ptot = f(Th) 50 150 10 100 150 200 ºC V BOOST FRED Figure 24 Forward current as a function of heatsink temperature IF = f(Th) 25 Ptot (W) IF (A) 80 Th ( o C) 20 60 15 40 10 20 5 0 0 0 At Tj = 50 175 100 150 T h ( o C) 200 0 At Tj = ºC Copyright by Vincotech 22 50 175 100 150 T h ( o C) 200 ºC Revision: 3 FZ06BIA045FH02 preliminary datasheet INPUT BOOST BOOST MOSFET Figure 25 Safe operating area as a function of drain-source voltage ID = f(VDS) BOOST MOSFET Figure 26 Gate voltage vs Gate charge VGS = f(Qg) 102 ID (A) UGS (V) 10 8 101 10uS 120V 480V 100uS 6 1mS 10mS 100mS 100 DC 4 -1 10 2 0 100 At D= Th = VGS = Tj = 101 102 0 50 75 100 125 150 Qg (nC) At ID = single pulse 80 ºC V 10 Tjmax ºC Copyright by Vincotech 25 V DS (V) 23 44 A Revision: 3 FZ06BIA045FH02 preliminary datasheet Bypass Diode Bypass diode Figure 1 Typical diode forward current as a function of forward voltage IF= f(VF) Bypass diode Figure 2 Diode transient thermal impedance as a function of pulse width ZthJH = f(tp) 50 ZthJC (K/W) IF (A) 101 40 100 30 20 Tj = Tjmax-25°C D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 10-1 Tj = 25°C 10 0 0 0,3 0,6 0,9 1,2 VF (V) 10-2 1,5 10-5 At tp = At D= RthJH = μs 250 Bypass diode 10-3 10-2 10-1 100 1011 tp / T 1,677 K/W Bypass diode Figure 4 Forward current as a function of heatsink temperature IF = f(Th) 100 t p (s) 70 IF (A) Ptot (W) Figure 3 Power dissipation as a function of heatsink temperature Ptot = f(Th) 10-4 60 80 50 60 40 30 40 20 20 10 0 0 0 At Tj = 50 150 100 150 T h ( o C) 200 0 At Tj = ºC Copyright by Vincotech 24 50 150 100 150 T h ( o C) 200 ºC Revision: 3 FZ06BIA045FH02 preliminary datasheet Thermistor Thermistor Figure 1 Typical NTC characteristic as a function of temperature RT = f(T) Thermistor Figure 2 Typical NTC resistance values B25/100⋅ 1 − 1 T T 25 NTC-typical temperature characteristic R(T ) = R25 ⋅ e R/Ω 25000 [Ω] 20000 15000 10000 5000 0 25 50 Copyright by Vincotech 75 100 T (°C) 125 25 Revision: 3 FZ06BIA045FH02 preliminary datasheet Switching Definitions BUCK MOSFET General conditions = 125 °C Tj = 4Ω Rgon Rgoff = 4Ω Output inverter IGBT Figure 1 Output inverter IGBT Figure 2 Turn-off Switching Waveforms & definition of tdoff, tEoff (tEoff = integrating time for Eoff) Turn-on Switching Waveforms & definition of tdon, tEon (tEon = integrating time for Eon) 200 140 IC 120 tdoff 150 VCE 100 VGE 90% VCE 90% VCE 80 100 % IC %60 VGE tdon 50 40 tEoff IC10% VGE 20 VGE10% IC 1% VCE3% 0 0 tEon -20 -0,1 -50 -0,05 0 VGE (0%) = VGE (100%) = VC (100%) = IC (100%) = tdoff = tEoff = 0,05 0,1 time (us) 0 10 400 15 0,16 0,17 0,15 0,2 0,25 0,3 2,4 2,45 2,5 VGE (0%) = VGE (100%) = VC (100%) = IC (100%) = tdon = tEon = V V V A μs μs Output inverter IGBT Figure 3 2,55 time(us) 0 10 400 15 0,03 0,06 2,6 2,7 V V V A μs μs Output inverter IGBT Figure 4 Turn-off Switching Waveforms & definition of tf 2,65 Turn-on Switching Waveforms & definition of tr 140 220 120 180 IC 100 VCE IC 90% 80 140 fitted IC 60% %60 %100 VCE IC90% IC 40% 40 tr 60 20 IC10% 20 0 -20 0,14 VC (100%) = IC (100%) = tf = 0,145 0,15 400 15 0,01 Copyright by Vincotech IC10% Ic tf 0,155 time (us) 0,16 0,165 -20 2,45 0,17 VC (100%) = IC (100%) = tr = V A μs 26 2,5 time(us) 2,55 400 15 0,01 2,6 2,65 V A μs Revision: 3 FZ06BIA045FH02 preliminary datasheet Switching Definitions BUCK MOSFET Output inverter IGBT Figure 5 Output inverter IGBT Figure 6 Turn-off Switching Waveforms & definition of tEoff Turn-on Switching Waveforms & definition of tEon 160 180 % % 130 100 Pon 140 Eoff Poff Eon 100 70 40 60 10 tEoff 20 VGE90% -20 VGE10% VCE3% IC 1% tEon -50 -0,1 -0,05 Poff (100%) = Eoff (100%) = tEoff = 0 0,05 0,1 time (us) 6,01 0,02 0,17 0,15 0,2 0,25 -20 2,475 0,3 2,5 2,55 2,575 2,6 time(us) Pon (100%) = Eon (100%) = tEon = kW mJ μs Figure 7 Gate voltage vs Gate charge (measured) 2,525 Output inverter FRED 6,01 0,07 0,06 kW mJ μs Output inverter IGBT Figure 8 Turn-off Switching Waveforms & definition of trr 120 15 80 Id fitted trr VGE (V) 10 40 Vd % 5 0 IRRM10% -40 0 IRRM90% -80 -120 2,52 -5 -20 VGEoff = VGEon = VC (100%) = IC (100%) = Qg = 0 20 0 10 400 15 112,54 Copyright by Vincotech 40 Qg (nC) 60 80 100 120 IRRM100% 2,53 2,54 2,55 2,56 2,57 time(us) Vd (100%) = Id (100%) = IRRM (100%) = trr = V V V A nC 27 400 15 -6 0,01 V A A μs Revision: 3 FZ06BIA045FH02 preliminary datasheet Switching Definitions BUCK MOSFET Output inverter FRED Figure 9 Output inverter FRED Figure 10 Turn-on Switching Waveforms & definition of tQrr (tQrr = integrating time for Qrr) Turn-on Switching Waveforms & definition of tErec (tErec= integrating time for Erec) 200 200 Qrr 150 Erec 150 Id 100 100 tQrr % 50 % 50 tErec 0 0 -50 -100 2,48 Id (100%) = Qrr (100%) = tQrr = Prec -50 2,51 2,54 15 0,03 0,02 2,57 2,6 time(us) 2,63 2,5 2,51 2,52 Prec (100%) = Erec (100%) = tErec = A μC μs 2,53 6,01 0,01 0,02 2,54 2,55 2,56 2,57 2,58 time(us) 2,59 2,6 kW mJ μs Measurement circuits Figure 11 BUCK stage switching measurement circuit Copyright by Vincotech 28 Revision: 3 FZ06BIA045FH02 preliminary datasheet Ordering Code and Marking - Outline - Pinout Ordering Code & Marking Version without thermal paste 12mm housing Ordering Code 10-FZ06BIA045FH02-P897D in DataMatrix as P897D in packaging barcode as P897D Outline Pinout Copyright by Vincotech 29 Revision: 3 FZ06BIA045FH02 preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright by Vincotech 30 Revision: 3