ROHM RN771V

RN771V
Diodes
PIN diode
RN771V
zApplications
For AGC, Switching.
zDimensions (Unit : mm)
zLand size figure (Unit : mm)
0.1±0.1
0.05
0.8MIN.
1.25±0.1
2.5±0.2
1.7±0.1
2.1
zFeatures
1) Small mold type. (UMD2)
2) High frequency resistance which is small
and low capacity.
0.9MIN.
UMD2
zConstruction
Silicon epitaxial planar
zStructure
0.7±0.2
0.1
0.3±0.05
ROHM : UMD2
JEDEC : S0D-323
JEITA : SC-90/A
dot (year week factory)
zTaping dimensions (Unit : mm)
0.3±0.1
φ1.55±0.05
2.0±0.05
1.40±0.1
4.0±0.1
2.8±0.1
2.75
8.0±0.2
3.5±0.05
1.75±0.1
4.0±0.1
φ1.05
1.0±0.1
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
VR
Reverse voltage (DC)
IF
Reverse current (DC)
Junction temperature
Tj
Storage temperature
Tstg
Limits
50
50
150
-55 to +150
Unit
V
mA
℃
℃
zElectrical characteristics (Ta=25°C)
Parameter
Forward voltage
Reverse current
Capacitance between terminals
High frequency resistance
Symbol
VF
IR
Ct
Min.
-
Typ.
-
Max.
1
0.1
0.9
Unit
V
µA
pF
Rf
-
-
7
Ω
Conditions
IF=10mA
VR=50V
VR=35V , f=1MHz
IF=10mA,f=100MHz
Rev.A
1/2
RN771V
Diodes
zElectrical characteristic curves (Ta=25°C)
100
Ta=150℃
f=1MHz
10000
Ta=25℃
Ta=125℃
Ta=150℃
Ta=-25℃
1
Ta=125℃
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
10
REVERSE CURRENT:IR(nA)
1000
Ta=75℃
100
Ta=25℃
10
Ta=-25℃
1
0.1
0.1
100
200
300
400
500
600
700
800
0.1
0
900 1000 1100
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
10000
10
20
30
40
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
50
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
FORWARD OPERATING
RESISTANCE:rf(Ω)
1000
100MHz
100
1MHz
10MHz
10
1
1
10
0.1
70
60
50
AVE:26.8nA
40
30
20
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
REVERSE CURRENT:IR(nA)
80
35
Ta=25℃
IF=10mA
n=30pcs
AVE:782.8mV
760
740
720
1
10
VF DISPERSION MAP
5
0.6
Ta=25℃
VR=50V
n=30pcs
90
30
780
FREQUENCY(MHz)
Ct-f CHARACTERISTICS
FORWARD CURRENT:IF(mA)
rf-IF CHARACTERISTICS
100
10
15
20
25
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
700
0.1
0.1
5
800
10
Ta=25℃
VR=0V
1
0.01
0
FORWARD VOLTAGE:VF(mV)
0
1
Ta=25℃
f=1MHz
VR=35V
n=30pcs
0.5
0.4
FORWARD OPERATING
RESISTANCE:rf(Ω)
FORWARD CURRENT:IF(mA)
10
100000
Ta=75℃
4
AVE:4.12Ω
Ta=25℃
f=100MHz
IF=10mA
n=30pcs
3
2
1
AVE:0.44pF
10
0
0.3
0
IR DISPERSION MAP
Ct DISPERSION MAP
FORWARD CURRENT:IF(mA)
rf DISPERSION MAP
ELECTROSTATIC
DDISCHARGE TEST ESD(KV)
4
3
AVE:3.44kV
AVE:2.67kV
2
1
AVE:1.48kV
0
C=200pF
R=0Ω
C=150pF
R=330Ω
C=100pF
R=1.5kΩ
ESD DISPERSION MAP
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0