ROHM DAN202K_1

DAN202K
Diodes
Switching diode
DAN202K
zApplications
Ultra high speed switching
zDimensions (Unit : mm)
zLand size figure (Unit : mm)
2.9±0.2
各リードとも
Each
lead has same dimension
同寸法
0.4 +0.1
-0.05
+0.1
2.4
zFeatures
1) Small mold type. (SMD3)
2) High reliability
1.0MIN.
0.8MIN.
0.95
0.15 -0.06
+0.2
2.8±0.2
1.6-0.1
(3)
1.9
0~0.1
(1)
0.95
0.8±0.1
0.95
zStructure
1.1±0.2
0.01
1.9±0.2
zConstruction
Silicon epitaxial planar
0.3~0.6
(2)
SMD3
ROHM : SMD3
JEDEC :S0T-346
JEITA : SC-59
week code
zTaping specifications (Unit : mm)
φ1.5±0.1
0
2.0±0.05
0.3±0.1
3.2±0.1
3.5±0.05
5.5±0.2
0~0.5
3.2±0.1
φ1.05MIN
4.0±0.1
3.2±0.1
8.0±0.2
1.75±0.1
4.0±0.1
1.35±0.1
zAbsolute maximum ratings (Ta=25°C)
Parameter
Reverse voltage (repatitive peak)
Reverse voltage (DC)
Forward current (Single)
Forward current (Double)
Average rectified forward current (Single)
Average rectified forward current (double)
Surge current (t=1us) (Single)
Surge current (t=1us) (Double)
Power dissipation
Junction temperature
Storage temperature
Limits
80
80
300
450
100
150
4
6
200
150
-55 to +150
Symbol
VRM
VR
IFM
IFM
Io
Io
Isurge
Isurge
Pd
Tj
Tstg
Unit
V
V
mA
mA
mA
mA
A
A
mW
℃
℃
zElectrical characteristics (Ta=25°C)
Parameter
Forward voltage
Reverse current
Capacitance between terminals
Reverse recovery time
Symbol
VF
IR
Ct
Min.
-
Typ.
-
Max.
1.2
0.1
3.5
Unit
V
µA
pF
trr
-
-
4
ns
Conditions
IF=100mA
VR=70V
VR=6V , f=1MHz
VR=6V , IF=5mA , RL=50Ω
Rev.C
1/2
DAN202K
Diodes
zElectrical characteristic curves (Ta=25°C)
Ta=150℃
10000
Ta=125℃
10
Ta=25℃
Ta=150℃
Ta=-25℃
1
f=1MHz
Ta=75℃
100
Ta=25℃
10
Ta=-25℃
1
0.1
0.01
0
100 200 300 400 500 600 700 800 900 1000
1
0.1
0
FORWARD VOLTAGE:VF(mV)
VF-IF CHARACTERISTICS
10
20 30 40 50 60 70
REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS
80
0
REVERSE CURRENT:IR(nA)
940
Ta=25℃
VR=80V
n=30pcs
90
930
920
910
80
9
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ta=25℃
IF=100mA
n=30pcs
70
60
50
40
AVE:9.655nA
30
20
AVE:921.7m
900
7
6
5
4
AVE:1.17pF
3
2
1
0
0
IR DISPERSION MAP
Ct DISPERSION MAP
10
8.3ms
10
5
AVE:3.50A
8
7
6
PEAK SURGE
FORWARD CURRENT:IFSM(A)
Ifsm
15
5
Ta=25℃
VR=6V
IF=5mA
RL=50Ω
n=10pcs
9
RESERVE RECOVERY TIME:trr(ns)
1cyc
5
4
3
2
1
0
Ifsm
4
8.3ms 8.3ms
1cyc
3
2
1
AVE:1.93ns
0
0
1
IFSM DISPERSION MAP
trr DISPERSION MAP
t
10
1
0.1
1
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
100
Rth(j-a)
100
Rth(j-c)
Mounted on epoxy board
IM=100mA
10
1ms
IF=10A
time
8
7
6
5
4
2
0
0.01
0.1
1
10
100
TIME:t(ms)
Rth-t CHARACTERISTICS
AVE:2.54kV
3
AVE:0.97kV
1
300us
1
0.001
100
9
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
Ifsm
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
10
1000
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
PEAK SURGE
FORWARD CURRENT:IFSM(A)
100
20
Ta=25℃
VR=6V
f=1MHz
n=10pcs
8
10
VF DISPERSION MAP
20
5
10
15
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
10
100
950
FORWARD VOLTAGE:VF(mV)
10
1000
0.1
PEAK SURGE
FORWARD CURRENT:IFSM(A)
Ta=125℃
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ta=75℃
REVERSE CURRENT:IR(nA)
FORWARD CURRENT:IF(mA)
100
1000
C=200pF
R=0Ω
C=100pF
R=1.5kΩ
ESD DISPERSION MAP
Rev.C
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0