DATA SHEET SMV1470-004LF: Hyperabrupt Junction Tuning Varactor Applications Low-noise VCOs and VCXOs in wireless systems Features High-capacitance ratio Designed for high volume SOT-23 package (MSL1, 260 C per JEDEC J-STD-020) Description Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. The SMV1470-004LF is a dual silicon, hyperabrupt junction varactor diode in a common cathode configuration. The specified high-capacitance ratio and low series resistance make this varactor appropriate for low-noise voltage controlled oscillators (VCOs) and voltage-controlled crystal oscillators (VCXOs) in wireless systems. Applications include low-noise and wideband VCOs and VCXOs for GSM, PCS, CDMA, and analog phones. Table 1 describes the package and markings of the SMV1470-004LF varactor. Table 1. Part Number and Configuration Common Cathode SOT-23 SMV1470-004LF Green™ Marking: ET3 LS = 1.4 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHScompliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200069H • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • May 20, 2015 1 DATA SHEET • SMV1470-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMV1470-004LF varactor are provided in Table 2. Electrical specifications are provided in Table 3. Typical capacitance values are listed in Table 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Typical performance characteristics of the SMV1470-004LF varactor are illustrated in Figures 1 and 2. The SPICE model for the SMV1470-004LF varactor is shown in Figure 3 and the associated model parameters are provided in Table 5. The SMV1470-004LF varactor is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Package Dimensions Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Package dimensions are shown in Figure 4, and tape and reel dimensions are provided in Figure 5. Table 2. SMV1470-004LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units 20 mA 250 mW +150 C Forward current IF Power dissipation PD Storage temperature TSTG –55 Operating temperature TA –55 +125 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMV1470-004LF Electrical Specifications (TA = +25 C Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units 20 nA 70.0 74.2 pF 13.4 14.8 pF Reverse current IR VR = 10 V Capacitance CT VR = 1 V, F = 1 MHz 65.8 VR = 4.5 V, F = 1 MHz 12.0 5 6 Capacitance ratio CTR CT (1 V)/CT (5 V) Series resistance RS VR = 1.5 V, F = 900 MHz Breakdown voltage VB IR = 10 μA 0.5 – 0.8 10 Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 May 20, 2015 • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • 200069H Ω V DATA SHEET • SMV1470-004LF HYPERABRUPT JUNCTION TUNING VARACTOR Table 4. Capacitance vs Reverse Voltage VR (V) CT (pF) 0 113.9 0.5 87.4 1.0 71.3 1.5 59.3 2.0 49.0 2.5 39.1 3.0 29.4 3.5 21.4 4.0 16.3 4.5 13.3 5.0 11.5 5.5 10.3 6.0 9.5 6.5 8.9 7.0 8.5 7.5 8.1 8.0 7.9 8.5 7.7 9.0 7.6 9.5 7.5 10.0 7.5 Typical Performance Characteristics +5 Percent of Variation (%) 120 Capacitance (pF) 100 80 60 40 20 +4 VVAR = 1 V +3 VVAR = 2.5 V +2 +1 VVAR = 4 V 0 –1 –2 –3 0 0 1 2 3 Reverse Voltage (V) Figure 1. Capacitance vs Voltage 4 5 –4 –40 –20 0 +20 +40 +60 +80 Temperature (°C) Figure 2. Relative Capacitance Change vs Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200069H • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • May 20, 2015 3 DATA SHEET • SMV1470-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = 0 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 S1672 Figure 3. SPICE Model Table 5. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS (Ω) LS (nH) SMV1470-004LF 110 80 39.7 3.94 0.5 1.4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 May 20, 2015 • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • 200069H DATA SHEET • SMV1470-004LF HYPERABRUPT JUNCTION TUNING VARACTOR 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 3 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 2 1 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8° Max. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.022 (0.55 mm) Ref. S1389 Figure 4. SOT-23 Package Dimension Drawing 4.00 ø1.00 Min. ø1.5 + 0.1/–0 4.00 (See Note 5) 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 1.75 ± 0.10 3.50 ± 0.05 A 1.0 0.8 ± 0.05 R 0.5 Typ. Pin 1 Indicator 8.00 + 0.3/–0.1 2.00 ± 0.05 0.25 ± 0.05 A 3.10 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.40 mm width. 4. Tolerance ±0.10 mm. 5. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm. 6. All measurements are in millimeters. 7. Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22 S1684b Figure 5. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200069H • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • May 20, 2015 5 DATA SHEET • SMV1470-004LF: HYPERABRUPT JUNCTION TUNING VARACTOR Copyright © 2002-2011, 2013-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 May 20, 2015 • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • 200069H