Model MC134MS-3 Model MC134MS-14 Double Balanced Mixer Communications Band Electrical Specifications RF 17.0 to 24.0 GHz (1) : Conditions Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1-dB Compression Point: Input Third Order Intercept Point: LO Power: (4) RF(GHz) 17.0-24.0 17.0-24.0 LO(GHz) 15.0-26.0 15.0-26.0 Specifications IF(MHz) DC-2000 DC-4000 Min Typical 7.5 dB 8.5 dB 17.0-24.0 17.0-24.0 15.0-26.0 DC-4000 38 dB 30 dB 40 dB +3 dBm 17.0-24.0 15.0-26.0 DC-4000 +13 dBm 17.0-24.0 15.0-26.0 DC-4000 +10 dBm 15.0-26.0 15.0-26.0 Max 9.5 dB 10.5 dB MC134MS-3 Outline: MS3C MC134MS-14 Outline: MS3D Typical Performance at 25˚C Mixers Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application note M112, for aid in selecting the outline and for mounting and installation information. ECTRU MICROWAVE INC. M SP All dimensions are in inches and [mm]. A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 601