Model MC5xSMx-7 Model MC5xSMx-14 Double Balanced Mixer Communications Band : Conditions RF(GHz) 3.7-14.5 3.7-14.5 3.5-15.0 Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: LO(GHz) 3.7-14.5 3.7-14.5 3.5-15.0 IF(MHz) DC-500 DC-2000 DC-4000 3.5-15.0 3.5-15.0 3.5-15.0 DC-2000 DC-4000 Input 1-dB Compression Point: 3.5-15.0 3.5-15.0 DC-4000 Input Third Order Intercept Point: 3.5-15.0 3.5-15.0 DC-4000 3.5-15.0 3.5-15.0 DC-4000 LO Power: (4) Specifications Min Typical 5.0 dB 5.5 dB 7.5 dB 26 dB 21 dB 35 dB 30 dB 23 dB +20 dBm +14 dBm +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +13 dBm +18 dBm Max 7.0 dB 8.5 dB 9.5 dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +13 dBm 7 = +18 dBm D = No Cover H = With Cover MC53 MC54 MC56 MC57 MC53 MC54 MC56 MC57 MC53 MC54 MC56 MC57 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application note M112, for aid in selecting the outline and for mounting and installation information. Outline: SMMC4A: AS SHOWN SMMC4B: RF & LO REVERSED MC5xSMD-7 MC5xSMH-7 Mixers Electrical Specifications RF 3.5 to 15.0 GHz (1) Typical Performance at 25˚C MC5xSMx-7: AS SHOWN MC5xSMx-14: RF & LO REVERSED Outline: SMMT4A: AS SHOWN SMMT4B: RF & LO REVERSED NOTE: See PC board footprint - FP1 on page 3-61 ECTRU MICROWAVE INC. M SP All dimensions are in inches and [mm]. A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 599