10-FY07NBA100S5-M506L58 target datasheet flow BOOST 1 650 V / 100 A Features ● ● ● ● flow 1 12mm housing Symmetric Boost IGBT S5 High speed Diode Thermistor Schematic Target applications ● UPS Types ● 10-FY07NBA100S5-M506L58 Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 650 V 83 A 300 A 125 W Boost Switch Collector-emitter voltage Collector current VCES IC Tj = Tjmax Ts = 80 °C Repetitive peak collector current ICRM tp limited by Tjmax Total power dissipation Ptot Tj = Tjmax Gate-emitter voltage VGES ±20 V Maximum junction temperature Tjmax 175 °C Copyright Vincotech Ts = 80 °C 1 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Maximum Ratings Tj = 25 °C, unless otherwise specified Parameter Symbol Condition Value Unit 650 V 82 A 200 A 106 W 175 °C 650 V 20 A 30 A 36 W Boost Diode Peak Repetitive Reverse Voltage VRRM Continuous (direct) forward current IF Repetitive peak forward current IFRM Total power dissipation Ptot Maximum Junction Temperature Tjmax Tj = Tjmax Ts = 80 °C Tj = Tjmax Ts = 80 °C Boost Sw. Protection Diode Peak Repetitive Reverse Voltage Continuous (direct) forward current VRRM IF Tj = Tjmax Ts = 80 °C Repetitive peak forward current IFRM Total power dissipation Ptot Maximum Junction Temperature Tjmax 175 °C Storage temperature T stg -40…+125 °C Operation temperature under switching condition T jop -40…(T jmax - 25) °C 4000 V min. 12,7 mm 8,44 mm Tj = Tjmax Ts = 80 °C Module Properties Thermal Properties Isolation Properties Isolation voltage V isol DC Voltage tp = 2 s Creepage distance Clearance Comparative Tracking Index Copyright Vincotech CTI > 200 2 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Unit Min Typ Max 3,2 4 4,8 V 1,35 1,75 V Boost Switch Static Gate-emitter threshold voltage VGE(th) Collector-emitter saturation voltage VCEsat VGE = VCE 15 0,001 25 100 25 Collector-emitter cut-off current ICES 0 650 25 100 µA Gate-emitter leakage current IGES 20 0 25 200 nA Internal gate resistance rg none Input capacitance Cies 6200 Output capacitance Coes Reverse transfer capacitance Cres Gate charge Qg f = 1 MHz 0 25 25 Ω 176 pF 24 15 520 100 25 240 nC 0,76 K/W Thermal Thermal resistance junction to sink Rth(j-s) phase-change material λ = 3,4 W/mK Boost Diode Static Forward voltage Reverse leakage c urrent 100 VF 650 Ir 25 1,50 125 1,43 150 1,40 25 1,77 V 5,3 µA Thermal Thermal resistance junc tion to sink Copyright Vincotech R th(j-s) phase-change material λ = 3,4 W /mK 0,90 3 K/W 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Characteristic Values Parameter Symbol Conditions VCE [V] VGE [V] VDS [V] VGS [V] VF [V] Value IC [A] ID [A] IF [A] Tj [°C] Min Unit Typ Max 1,79 1,67 1,87 Boost Sw. Protection Diode Static Forward voltage VF Reverse leakage current Ir 15 650 25 125 25 0,18 V µA Thermal Thermal resistance junction to sink Rth(j-s) phase-change material λ = 3,4 W/mK 2,65 K/W 21,5 kΩ Thermistor Rated resistance R Deviation of R100 ΔR/R Power dissipation 25 R100 = 1486 Ω 100 P Power dissipation constant -4,5 +4,5 % 25 210 mW 25 3,5 mW/K B-value B(25/50) 25 3884 K B-value B(25/100) 25 3964 K Vincotech NTC Reference Copyright Vincotech F 4 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Ordering Code & Marking Version without thermal paste with solder pins 12mm housing Ordering Code 10-FY07NBA100S5-M506L58 NN-NNNNNNNNNNNNNN TTTTTTVV WWYY UL VIN LLLLL SSSS Text Datamatrix Name Date code UL & VIN Lot Serial NN-NNNNNNNNNNNNNN-TTTTTTVV WWYY UL VIN LLLLL SSSS Type&Ver Lot number Serial Date code TTTTTTTVV LLLLL SSSS WWYY Outline Pin table [mm] Pin table [mm] Pin X Y 1 0 2,8 2 0 5,4 N2 26 3 0 8 N2 27 4 0 10,6 N2 28 5 0 17,6 N1 6 0 20,2 N1 7 0 22,8 N1 8 0 25,4 N1 9 16,6 28,2 DC-Boost 10 19,2 28,2 DC-Boost 11 12 13 21,8 24,4 44,2 28,2 28,2 28,2 DC-Boost DC-Boost Therm1 14 52,2 28,2 Therm2 15 49,6 20,5 Boost- 16 52,2 20,5 Boost- 17 49,6 17,9 Boost- 18 52,2 17,9 Boost- 19 49,6 10,4 Boost+ 20 52,2 10,4 Boost+ 21 49,6 7,8 Boost+ 22 52,2 7,8 Boost+ 23 24,4 0 DC+Boost 24 21,8 0 DC+Boost Copyright Vincotech Function N2 Pin X Y 25 19,2 0 Function DC+Boost 16,6 0 DC+Boost 21,8 18,3 S25 21,8 15,5 G25 29 8,4 12,7 G27 30 8,4 9,9 S27 5 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Pinout Identification ID Component Voltage Current Function T1, T2 IGBT 650 V 100 A Boost Switch D3, D4 FWD 650 V 100 A Boost Diode D1, D2 FWD 650 V 15 A Boost Sw. Protection Diode NTC NTC Copyright Vincotech Comment Thermistor 6 02 Apr. 2016 / Revision 1 10-FY07NBA100S5-M506L58 target datasheet Packaging instruction Standard packaging quantity (SPQ) 100 >SPQ Standard <SPQ Sample Handling instruction Handling instructions for flow 1 packages see vincotech.com website. Package data Package data for flow 1 packages see vincotech.com website. UL recognition and file number This device is certified according to UL 1557 standard, UL file number E192116. For more information see vincotech.com website. Document No.: Date: 10-FY07NBA100S5-M506L58-T1-14 02 Apr. 2016 Modification: Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 7 02 Apr. 2016 / Revision 1