PANASONIC 74LVC2G02DC

INTEGRATED CIRCUITS
DATA SHEET
74LVC2G02
Dual 2-input NOR gate
Product specification
Supersedes data of 2003 Oct 15
2004 Sep 15
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
FEATURES
DESCRIPTION
• Wide supply voltage range from 1.65 V to 5.5 V
The 74LVC2G02 is a high-performance, low-power,
low-voltage, Si-gate CMOS device and superior to most
advanced CMOS compatible TTL families.
• 5 V tolerant outputs for interfacing with 5 V logic
• High noise immunity
Inputs can be driven from either 3.3 V or 5 V devices. This
feature allows the use of these devices as translators in a
mixed 3.3 V and 5 V environment.
• Complies with JEDEC standard:
– JESD8-7 (1.65 V to 1.95 V)
– JESD8-5 (2.3 V to 2.7 V)
This device is fully specified for partial power-down
applications using Ioff. The Ioff circuitry disables the output,
preventing the damaging backflow current through the
device when it is powered down.
– JESD8B/JESD36 (2.7 V to 3.6 V).
• ±24 mA output drive (VCC = 3.0 V)
• CMOS low power consumption
• Latch-up performance exceeds 250 mA
The 74LVC2G02 provides the 2-input NOR gate function.
• Direct interface with TTL levels
• Inputs accept voltages up to 5 V
• Multiple package options
• ESD protection:
– HBM EIA/JESD22-A114-B exceeds 2000 V
– MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 °C to +85 °C and −40 °C to +125 °C.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr = tf ≤ 2.5 ns.
SYMBOL
tPHL/tPLH
PARAMETER
propagation delay
inputs nA, nB to output nY
CONDITIONS
TYPICAL
UNIT
VCC = 1.8 V; CL = 30 pF; RL = 1 kΩ
3.8
ns
VCC = 2.5 V; CL = 30 pF; RL = 500 Ω
2.4
ns
VCC = 2.7 V; CL = 50 pF; RL = 500 Ω
3.2
ns
VCC = 3.3 V; CL = 50 pF; RL = 500 Ω
2.4
ns
VCC = 5.0 V; CL = 50 pF; RL = 500 Ω
1.8
ns
CI
input capacitance
2.5
pF
CPD
power dissipation capacitance per gate VCC = 3.3 V; notes 1 and 2
14
pF
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in Volts;
N = total load switching outputs;
Σ(CL × VCC2 × fo) = sum of the outputs.
2. The condition is VI = GND to VCC.
2004 Sep 15
2
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
FUNCTION TABLE
See note 1.
INPUT
OUTPUT
nA
nB
nY
L
L
H
L
H
L
H
L
L
H
H
L
Note
1. H = HIGH voltage level;
L = LOW voltage level.
ORDERING INFORMATION
PACKAGE
TYPE NUMBER
TEMPERATURE
RANGE
PINS
PACKAGE
MATERIAL
CODE
MARKING
74LVC2G02DP
−40 °C to +125 °C
8
TSSOP8
plastic
SOT505-2
V02
74LVC2G02DC
−40 °C to +125 °C
8
VSSOP8
plastic
SOT765-1
V02
74LVC2G02GM
−40 °C to +125 °C
8
XSON8
plastic
SOT833-1
V02
PINNING
PIN
SYMBOL
DESCRIPTION
1
1A
data input
2
1B
data input
3
2Y
data output
4
GND
ground (0 V)
5
2A
data input
6
2B
data input
7
1Y
data output
8
VCC
supply voltage
2004 Sep 15
3
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
02
1A
1
8
VCC
1B
2
7
1Y
2Y
3
6
2B
GND
4
5
2A
02
1A
1
8
VCC
1B
2
7
1Y
2Y
3
6
2B
GND
4
5
2A
001aab642
001aab643
Transparent top view
Fig.1 Pin configuration TSSOP8 and VSSOP8.
Fig.2 Pin configuration XSON8.
handbook, halfpage
handbook, halfpage
1
1A
2
1B
5
2A
6
2B
≥1
7
≥1
3
2
1Y
7
2Y
3
5
6
MNA717
MNA716
Fig.3 Logic symbol.
2004 Sep 15
1
Fig.4 IEC logic symbol.
4
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
handbook, halfpage
B
Y
A
MNA105
Fig.5 Logic diagram (one gate).
2004 Sep 15
5
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VCC
supply voltage
1.65
5.5
V
VI
input voltage
0
5.5
V
VO
output voltage
active mode
0
VCC
V
VCC = 0 V; Power-down mode
0
5.5
V
Tamb
operating ambient temperature
−40
+125
°C
tr, tf
input rise and fall times
VCC = 1.65 V to 2.7 V
0
20
ns/V
VCC = 2.7 V to 5.5 V
0
10
ns/V
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
SYMBOL
PARAMETER
CONDITIONS
MIN.
−0.5
MAX.
VCC
supply voltage
IIK
input diode current
VI < 0 V
−
−50
mA
VI
input voltage
note 1
−0.5
+6.5
V
IOK
output diode current
VO > VCC or VO < 0 V
−
±50
mA
VO
output voltage
active mode; notes 1 and 2
−0.5
VCC + 0.5 V
Power-down mode; notes 1 and 2 −0.5
IO
output source or sink current
VO = 0 V to VCC
−
+6.5
UNIT
V
+6.5
V
±50
mA
ICC, IGND
VCC or GND current
−
±100
mA
Tstg
storage temperature
−65
+150
°C
Ptot
power dissipation
−
300
mW
Tamb = −40 °C to +125 °C
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
2004 Sep 15
6
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
DC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
OTHER
TYP.(1)
MAX.
UNIT
VCC (V)
Tamb = −40 °C to +85 °C
VIH
VIL
VOH
VOL
HIGH-level input voltage
LOW-level input voltage
HIGH-level output
voltage
1.65 to 1.95
0.65 × VCC
−
−
V
2.3 to 2.7
1.7
−
−
V
2.7 to 3.6
2.0
−
−
V
4.5 to 5.5
0.7 × VCC
−
−
V
1.65 to 1.95
−
−
0.35 × VCC
V
2.3 to 2.7
−
−
0.7
V
2.7 to 3.6
−
−
0.8
V
4.5 to 5.5
−
−
0.3 × VCC
V
VI = VIH or VIL
IO = −100 µA
1.65 to 5.5
VCC − 0.1
−
−
V
IO = −4 mA
1.65
1.2
1.53
−
V
IO = −8 mA
2.3
1.9
2.13
−
V
IO = −12 mA
2.7
2.2
2.50
−
V
IO = −24 mA
3.0
2.3
2.60
−
V
IO = −32 mA
4.5
3.8
4.10
−
V
LOW-level output voltage VI = VIH or VIL
IO = 100 µA
1.65 to 5.5
−
−
0.1
V
IO = 4 mA
1.65
−
0.08
0.45
V
IO = 8 mA
2.3
−
0.14
0.3
V
IO = 12 mA
2.7
−
0.19
0.4
V
IO = 24 mA
3.0
−
0.37
0.55
V
IO = 32 mA
4.5
−
0.43
0.55
V
ILI
input leakage current
VI = 5.5 V or GND
5.5
−
±0.1
±5
µA
Ioff
power OFF leakage
current
VI or VO = 5.5 V
0
−
±0.1
±10
µA
ICC
quiescent supply current VI = VCC or GND;
IO = 0 A
5.5
−
0.1
10
µA
∆ICC
additional quiescent
supply current per pin
2.3 to 5.5
−
5
500
µA
2004 Sep 15
VI = VCC − 0.6 V;
IO = 0 A
7
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
OTHER
TYP.(1)
MAX.
UNIT
VCC (V)
Tamb = −40 °C to +125 °C
VIH
VIL
VOH
VOL
HIGH-level input voltage
LOW-level input voltage
HIGH-level output
voltage
1.65 to 1.95
0.65 × VCC
−
−
V
2.3 to 2.7
1.7
−
−
V
2.7 to 3.6
2.0
−
−
V
4.5 to 5.5
0.7 × VCC
−
−
V
1.65 to 1.95
−
−
0.35 × VCC
V
2.3 to 2.7
−
−
0.7
V
2.7 to 3.6
−
−
0.8
V
4.5 to 5.5
−
−
0.3 × VCC
V
IO = −100 µA
1.65 to 5.5
VCC − 0.1
−
−
V
IO = −4 mA
1.65
0.95
−
−
V
IO = −8 mA
2.3
1.7
−
−
V
IO = −12 mA
2.7
1.9
−
−
V
IO = −24 mA
3.0
2.0
−
−
V
IO = −32 mA
4.5
3.4
−
−
V
IO = 100 µA
1.65 to 5.5
−
−
0.1
V
IO = 4 mA
1.65
−
−
0.70
V
IO = 8 mA
2.3
−
−
0.45
V
IO = 12 mA
2.7
−
−
0.60
V
IO = 24 mA
3.0
−
−
0.80
V
VI = VIH or VIL
LOW-level output voltage VI = VIH or VIL
4.5
−
−
0.80
V
ILI
input leakage current
VI = 5.5 V or GND
5.5
−
−
±20
µA
Ioff
power OFF leakage
current
VI or VO = 5.5 V
0
−
−
±20
µA
ICC
quiescent supply current VI = VCC or GND;
IO = 0 A
5.5
−
−
40
µA
∆ICC
additional quiescent
supply current per pin
2.3 to 5.5
−
−
5000
µA
IO = 32 mA
VI = VCC − 0.6 V;
IO = 0 A
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Sep 15
8
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
AC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
SYMBOL
PARAMETER
MIN.
OTHER
TYP.(1)
MAX.
UNIT
VCC (V)
Tamb = −40 °C to +85 °C
tPHL/tPLH
propagation delay
nA, nB to nY
see Figs 6 and 7
1.65 to 1.95
1.2
3.8
8.9
ns
2.3 to 2.7
0.8
2.4
5.4
ns
2.7
0.8
3.2
6.0
ns
3.0 to 3.6
0.6
2.4
4.9
ns
4.5 to 5.5
0.6
1.8
4.3
ns
Tamb = −40 °C to +125 °C
tPHL/tPLH
propagation delay
nA, nB to nY
see Figs 6 and 7
Note
1. All typical values are measured at Tamb = 25 °C.
2004 Sep 15
9
1.65 to 1.95
1.2
−
11.2
ns
2.3 to 2.7
0.8
−
6.8
ns
2.7
0.8
−
7.5
ns
3.0 to 3.6
0.6
−
6.2
ns
4.5 to 5.5
0.6
−
5.5
ns
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
AC WAVEFORMS
VI
handbook, halfpage
VM
nA, nB input
GND
tPHL
tPLH
VOH
VM
nY output
VOL
tTHL
tTLH
MNA218
INPUT
VCC
VM
VI
tr = tf
1.65 V to 1.95 V
0.5 × VCC
VCC
≤ 2.0 ns
2.3 V to 2.7 V
0.5 × VCC
VCC
≤ 2.0 ns
2.7 V
1.5 V
2.7 V
≤ 2.5 ns
3.0 V to 3.6 V
1.5 V
2.7 V
≤ 2.5 ns
4.5 V to 5.5 V
0.5 × VCC
VCC
≤ 2.5 ns
VOL and VOH are typical output voltage drop that occur with the output load.
Fig.6 The input (nA, nB) to output (nY) propagation delays.
2004 Sep 15
10
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
VEXT
VCC
VI
PULSE
GENERATOR
RL
VO
D.U.T.
CL
RT
RL
mna616
VCC
VI
CL
RL
VEXT
tPLH/tPHL tPZH/tPHZ
tPZL/tPLZ
1.65 V to 1.95 V
VCC
30 pF
1 kΩ
open
GND
2 × VCC
2.3 V to 2.7 V
VCC
30 pF
500 Ω
open
GND
2 × VCC
2.7 V
2.7 V
50 pF
500 Ω
open
GND
6V
3.0 V to 3.6 V
2.7 V
50 pF
500 Ω
open
GND
6V
4.5 V to 5.5 V
VCC
50 pF
500 Ω
open
GND
2 × VCC
Definitions for test circuit:
RL = Load resistor.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.7 Load circuitry for switching times.
2004 Sep 15
11
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
PACKAGE OUTLINES
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
D
E
A
SOT505-2
X
c
HE
y
v M A
Z
5
8
A
A2
(A3)
A1
pin 1 index
θ
Lp
L
1
4
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D(1)
E(1)
e
HE
L
Lp
v
w
y
Z(1)
θ
mm
1.1
0.15
0.00
0.95
0.75
0.25
0.38
0.22
0.18
0.08
3.1
2.9
3.1
2.9
0.65
4.1
3.9
0.5
0.47
0.33
0.2
0.13
0.1
0.70
0.35
8°
0°
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
OUTLINE
VERSION
SOT505-2
2004 Sep 15
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
02-01-16
---
12
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
D
E
SOT765-1
A
X
c
y
HE
v M A
Z
5
8
Q
A
A2
A1
pin 1 index
(A3)
θ
Lp
1
4
e
L
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D(1)
E(2)
e
HE
L
Lp
Q
v
w
y
Z(1)
θ
mm
1
0.15
0.00
0.85
0.60
0.12
0.27
0.17
0.23
0.08
2.1
1.9
2.4
2.2
0.5
3.2
3.0
0.4
0.40
0.15
0.21
0.19
0.2
0.13
0.1
0.4
0.1
8°
0°
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT765-1
2004 Sep 15
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
02-06-07
MO-187
13
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 0.95 x 1.95 x 0.5 mm
1
2
SOT833-1
b
4
3
4×
(2)
L
L1
e
8
7
6
e1
5
e1
e1
8×
A
(2)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A (1)
max
A1
max
b
D
E
e
e1
L
L1
mm
0.5
0.04
0.25
0.17
2.0
1.9
1.0
0.9
0.6
0.5
0.35
0.27
0.40
0.32
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
JEITA
SOT833-1
---
MO-252
---
2004 Sep 15
14
EUROPEAN
PROJECTION
ISSUE DATE
04-07-15
04-07-22
Philips Semiconductors
Product specification
Dual 2-input NOR gate
74LVC2G02
DATA SHEET STATUS
LEVEL
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
Development
DEFINITION
I
Objective data
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Production
This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification  The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Life support applications  These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition  Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes  Philips Semiconductors
reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
Application information  Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2004 Sep 15
15
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: [email protected].
SCA76
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R20/02/pp16
Date of release: 2004
Sep 15
Document order number:
9397 750 13772