Download

CH-507TX & RX
HDMI to CAT5e/6 with LAN/IR/RS-232
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO.
DATE DD/MM/YY SUMMARY OF CHANGE
VS1
29/02/12
First Release
VR2
02/03/12
PoE Support (Brand only)
VS3
23/03/12
Amended PoE function
Updated the connection diagram
and the specifications table
VR4
16/04/12
Add IR Distance
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Transmitter Front and Rear Panels��3
6.2 Receiver Front and Rear Panels�����4
6.3. D-Sub 9 Pin Definitions��������������������5
7. Connection Diagram���������������������������� 6
8. Specifications���������������������������������������� 7
9. Acronyms����������������������������������������������� 8
1. INTRODUCTION
The HDMI with RS-232 over Single CAT5e/6 transmitter and receiver set
can send uncompressed audio/video over a single run of CAT5e/6
cable up to 100 m with PoE feature and the added benefit of control
through the built-in RS-232 and IR ports and a bi-directional LAN
connection.
2. APPLICATIONS
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1×HDMI to CAT5e/6 (with LAN/IR/RS-232) Transmitter
• 1×CAT5e/6 to HDMI (with LAN/IR/RS-232) Reciever
• 1×IR Blaster
• 1×IR Receiver
• 1×24 V/1.25 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI source equipment such as DVD/Blu-ray player and HDMI
equipped output display (TV or monitor).
1
5. FEATURES
• HDMI 1.4 with 3D, 4k×2k support, HDCP & DVI Compliant
• Supports CEC bypass
• Simultaneous transmission of uncompressed data over a single
100 m/328 ft CAT5e/6 cable
• Uncompressed video 1080p, 60 Hz, 36-bit
• Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
• 5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-232)
• Installation Friendly
Note:
1. This system was tested with CAT6/23AWG cables, results may vary
with cables of a different specification.
2. The PoE function is designed for powering compatible receiver
units only—non-PoE receivers will need their own power supply.
Receivers of another brand may not be compatible.
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
IR1 Blaster
Transmitter
Link
Power
LAN
1
Rear
RS-232 In
HDMI In
2
DC 24V
IR2 Extender
HDMI to CAT5e/6 with LAN/IR/RS232
3
4
5
6
7
CAT5e/6 Out
8
9
1 HDMI In: Connect to HDMI source equipment such as a DVD or Bluray player.
2 LAN: Connect to an internet or network connection.
3 RS-232 In: Connect to a PC or laptop with D-Sub 9 pin male cable
for the transmission of RS-232 commands.
4 Power LED: This blue LED will illuminate when the device is
connected to a power supply.
5 DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet.
6 IR 1 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
7 IR 2 Extender: Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
8 Link LED: The yellow LED will illuminate when both the input and
output signals are connected.
9 CAT5e/6 Out: Connect to the reciever unit with a Single CAT5e/6
cable for tranmission of all data signals.
3
6.2 Receiver Front and Rear Panels
Front
HDMI Out
IR2 Blaster
Receiver
Link
Power
LAN
1
Rear
RS-232 Out
2
IR1 Extender
CAT5e/6 to HDMI with LAN/IR/RS232
3
5
4
6
CAT5e/6 In
7
8
1 HDMI Out: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
2 LAN: Connect to a PC or Laptop to the Internet or network
connection.
3 RS-232 Out: Connect to the device that is to be controlled (via
D-Sub 9 pin female cable) by RS-232 commands.
4 Power LED: This blue LED will illuminate when the device is
connected to a power supply.
5 IR 2 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line of sight of the
equipment to be controlled.
6 IR 1 Extender: Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
7 Link LED: The yellow LED will illuminate when both the input and
output signals are connected.
8 CAT5e/6 In: Connect to the transmitter unit with a Single CAT5e/6
cable for tranmission of all data signals.
4
6.3. IR Cable Pin Assignment
IR Blaster
1 Power 5 V
2 IR Blaster Signal
3 NC
IR Receiver
1
2
3
6.4. D-Sub 9 Pin Definitions
5
Pin
Define TX / RX
1
N/C
2
TxD / RxD
3
RxD / TxD
4
N/C
5
GND
6
N/C
7
N/C
8
N/C
9
N/C
IR Signal
Power 5 V
Grounding
7. CONNECTION DIAGRAM
DVD or Blu-ray Player
Internet Modem
or Router
1.5m
HDMI
CAT5e/6
60°
RS-232
IR Blaster
Power
Supply
3m
7m
RS-232 In
HDMI In
LAN
3m
60°
IR1 Blaster
Link
Power
DC 24V
Transmitter
HDMI to CAT5e/6 with LAN/IR/RS232
IR2 Extender
TX
CAT5e/6 Out
RS-232 Equipped
PC or Notebook
IR Extender
IR Extender
3m
7m
60°
3m
IR2 Blaster
Link
Power
IR1 Extender
IR Blaster
CAT5e/6 In
RS-232 Out
HDMI Out
LAN
Receiver
RX
CAT5e/6 to HDMI with LAN/IR/RS232
60°
1.5m
HDMI
RS-232
RS-232 Equipped
HDMI Switcher
CAT5e/6
TV or Monitor
Notebook
6
8. SPECIFICATIONS
Video Bandwidth
300MHz / 9Gbps
Ethernet Speed
100 Mbps
Transmitter
Input
1×HDMI, 1×IR Extender,1×RS-232, 1×LAN
Output
1×CAT5e/6, 1×IR Blaster
Receiver
Input
1×CAT5e/6, 1×IR Extender
Output
1×HDMI, 1×RS-232, 1× IR Blaster, 1× LAN
HDMI In/Out Cable
Up to 10 Meters
Distance
CAT6 In/Out Cable
Up to 100 Meters
Distance
HDMI In/Out Supports
Resolution
[email protected]/60, [email protected],
VGA~WUXGA
IR Frequency
30~50 kHz
ESD Protection
Human Body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply
24 V/1.25 A DC (US/EU Standards, CE/FCC/
UL certified)
Dimensions
102 mm (W)×113 mm (D)×25 mm (H)/TX
102 mm (W)×107 mm (D)×25 mm (H)/RX
Weight
252 g (TX), 256 g (RX)
Chassis Material
Aluminum
Silkscreen Color
Silver
Power Consumption
13 W
Operating Temperature 0 °C~40 °C/32 °F ~104 °F
Storage Temperature
−20 °C~60 °C/−4 °F~140 °F
Relative Humidity
20~90 % RH (non-condensing)
7
9. ACRONYMS
ACRONYM
COMPLETE TERM
CAT5e
Category 5 Cable
CAT6
Category 6 Cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
HDCP
High-bandwidth Digital Content Protection
HDMI
High Definition Multimedia Interface
IR
Infrared
8
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
Similar pages