MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE A SCALE 1:1 1 12 3 STRAIGHT LEAD DATE 08 MAY 2012 2 3 BENT LEAD A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN DIMENSIONS P AND L. DIMENSIONS D AND J APPLY BETWEEN DI MENSIONS L AND K MINIMUM. THE LEAD DIMENSIONS ARE UNCONTROLLED IN DIMENSION P AND BEYOND DIMENSION K MINIMUM. STRAIGHT LEAD B R P L F K DIM A B C D F G H J K L N P R V D X X G J H V C SECTION X−X N 1 N INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.021 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 --0.250 --0.080 0.105 --0.100 0.135 --0.135 --- MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.53 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 --6.35 --2.04 2.66 --2.54 3.43 --3.43 --- A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN DIMENSIONS P AND L. DIMENSIONS D AND J APPLY BETWEEN DIMENSIONS L AND K MINIMUM. THE LEAD DIMENSIONS ARE UNCONTROLLED IN DIMENSION P AND BEYOND DIMENSION K MINIMUM. BENT LEAD R B P T SEATING PLANE G K DIM A B C D G J K N P R V D X X J V 1 C N SECTION X−X INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.021 0.094 0.102 0.018 0.024 0.500 --0.080 0.105 --0.100 0.135 --0.135 --- MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.53 2.40 2.80 0.46 0.61 12.70 --2.04 2.66 --2.54 3.43 --3.43 --- STYLES ON PAGE 2 DOCUMENT NUMBER: STATUS: NEW STANDARD: 98AON52857E ON SEMICONDUCTOR STANDARD http://onsemi.com TO−92 (TO−226) 1 WATT 1 © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 1 OFXXX 3 TO−92 (TO−226) 1 WATT CASE 29−10 ISSUE A DATE 08 MAY 2012 STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 3: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. DRAIN 2. SOURCE 3. GATE STYLE 6: PIN 1. GATE 2. SOURCE & SUBSTRATE 3. DRAIN STYLE 7: PIN 1. SOURCE 2. DRAIN 3. GATE STYLE 8: PIN 1. DRAIN 2. GATE 3. SOURCE & SUBSTRATE STYLE 9: PIN 1. BASE 1 2. EMITTER 3. BASE 2 STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE STYLE 11: PIN 1. ANODE 2. CATHODE & ANODE 3. CATHODE STYLE 12: PIN 1. MAIN TERMINAL 1 2. GATE 3. MAIN TERMINAL 2 STYLE 13: PIN 1. ANODE 1 2. GATE 3. CATHODE 2 STYLE 14: PIN 1. EMITTER 2. COLLECTOR 3. BASE STYLE 15: PIN 1. ANODE 1 2. CATHODE 3. ANODE 2 STYLE 16: PIN 1. ANODE 2. GATE 3. CATHODE STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER STYLE 18: PIN 1. ANODE 2. CATHODE 3. NOT CONNECTED STYLE 19: PIN 1. GATE 2. ANODE 3. CATHODE STYLE 20: PIN 1. NOT CONNECTED 2. CATHODE 3. ANODE STYLE 21: PIN 1. COLLECTOR 2. EMITTER 3. BASE STYLE 22: PIN 1. SOURCE 2. GATE 3. DRAIN STYLE 23: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 24: PIN 1. EMITTER 2. COLLECTOR/ANODE 3. CATHODE STYLE 25: PIN 1. MT 1 2. GATE 3. MT 2 STYLE 26: PIN 1. 2. 3. STYLE 27: PIN 1. MT 2. SUBSTRATE 3. MT STYLE 28: PIN 1. CATHODE 2. ANODE 3. GATE STYLE 29: PIN 1. NOT CONNECTED 2. ANODE 3. CATHODE STYLE 30: PIN 1. DRAIN 2. GATE 3. SOURCE STYLE 32: PIN 1. BASE 2. COLLECTOR 3. EMITTER STYLE 33: PIN 1. RETURN 2. INPUT 3. OUTPUT STYLE 34: PIN 1. INPUT 2. GROUND 3. LOGIC STYLE 35: PIN 1. GATE 2. COLLECTOR 3. EMITTER VCC GROUND 2 OUTPUT STYLE 31: PIN 1. GATE 2. DRAIN 3. SOURCE DOCUMENT NUMBER: STATUS: NEW STANDARD: 98AON52857E ON SEMICONDUCTOR STANDARD http://onsemi.com TO−92 (TO−226) 1 WATT 2 © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 2 OFXXX 3 DOCUMENT NUMBER: 98AON52857E PAGE 3 OF 3 ISSUE REVISION DATE O ADDED BENT−LEAD TAPE & REEL VERSION. TRANSFERRED FROM OLD 98A# 98ASB42022B TO NEW 98AON52857E. REQ. BY D. TRUHITTE. 17 AUG 2010 A REMOVED REFERENCE TO BULK PACK, AMMO PACK & TAPE & REEL. REQ. BY M. JONES. 08 MAY 2012 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. © Semiconductor Components Industries, LLC, 2012 May, 2012 − Rev. A Case Outline Number: 29−10