Character drivers Graphics drivers These low-power CMOS LCD controller/drivers are designed to drive dot-matrix LCD displays. The PCF2113x controls up to two lines of 12 or one line of 24 characters, with a dot format of 5 x 8, and supports up to 120 icons. The icon-driving feature can also be used to drive a number of segments, such as a line of 7- or 14-segment digits. The PCF2119x is the same as the PCF2113x, but controls up to two lines of 16 or one line of 32 characters and supports up to 160 icons. Both devices are standalone ICs with on-chip generation of LCD bias voltages, including temperature compensation. The result is fewer external components and lower current consumption. Both devices interface to most microcontrollers using a 4- or 8-bit parallel bus or the two-wire I²C-bus. Both devices also include a character generator and display alphanumeric and kana (Japanese) characters. Custom character sets can be provided on request. Combining a number of digits results in a full-graphic block with up to 16 x 40 pixels. The block can be controlled by the 16-digit CGRAM, which can also be used to generate custom, user-specific characters. To reduce power consumption during idle time, the Icon Mode can be used to show device activity status on the display. Also known as dot-matrix drivers, these are low-power CMOS LCD row/column drivers, designed to drive dot-matrix graphic displays at multiplex rates up to 80. They can drive a large number of icons, and can drive a series of 7- or 14-segment digits. Each driver is a standalone IC, including on-chip generation of VLCD and the LCD bias voltages. The result is fewer external components and lower power consumption. Most of the drivers communicate with a microcontroller using the two-wire, bidirectional I²C-bus; some use the SPI-bus or a parallel bus. Large display matrixes – such as 65 x 133 or 80 x 128 – make it possible to display more text, and ensure that fonts are sharp and easy to read, with almost invisible pixels. Key features } Single-chip LCD controller / driver } 5 x 7 character format plus cursor; 5 x 8 for kana (Japanese) and user-defined symbols. } Very low power consumption (20 to 200 μA), in Icon Mode < 25 μA, in Power-down mode < 2 μA } Integrated generation of VLCD with temperature compensation (external supply also possible) } Icon and display blinking mode } Display shift or static display modes } Display data RAM: 80 characters } Character generator ROM: 240 characters } User-defined characters: 16 } Multiplex rates 1:18 (normal operation), 1:9 (single line operation) and 1:2 (for icon mode only) } I²C-bus and parallel interfaces } Internal oscillator, with external clock also possible Key features } Standalone LCD controller / driver } Low power consumption, suitable for battery-operated systems } Display data RAM with one-to-one pixel correspondence } Can also drive icons } Software-selectable multiplex rates } Integrated generation of VLCD with temperature compensation (external supply also possible) } No external components required } I²C-bus, SPI-bus and parallel interfaces Graphic driver selection guide Rows Columns Matrix size Vdd [V] logic Vdd2 [V] Vlcd gen. PCF8531 34, 26, 17 128 34 x 128 or 33 x 128 plus 128 icons 1.8 - 5.5 2.5 - 4.5 4.0 - 9.0 Yes PCF8578 8, 16, 24, 32 32, 24, 16, 8 8 x 32 or 16 x 24 stand alone Up to 40960 dots combined with 32 PCF8579 2.5 - 6.0 - 3.5 - 9.0 No 40 32 PCF8579 drive up to 40960 dots, matrix size 32 x 1280. Must be used with PCF8578 2.5 - 6.0 Type Character driver selection guide Matrix size (lines x chars) Type Vdd [V] logic Effective Vdd2 [V] Vlcd [V] Vlcd gen. Idd, typ [uA] (int. Vlcd gen.) On-chip bias/ Vlcd generator PCF2113 2 lines by 12 + 120 icons or 1 line by 24 + 120 icons 1.8 - 5.5 2.2 - 4.0 2.2 - 6.5 190 Yes PCF2116 1 or 2 lines by 24 or up to 4 lines by 12 2.5 - 6.0 2.5 - 6.0 3.5 - 9.0 700 PCF2119 2 lines by 16 + 160 icons or 1 line by 32 + 160 icons 1.5 - 5.5 2.2 - 4.0 2.2 - 6.5 190 Temp comp Interface Frame frequency [Hz] (internal osc) Packages Operating temperature [°C] PCF8579 Yes I²C Fast Mode and 4/8-bit parallel 95, typ. U, LQFP100 -40 to +85 Yes No I²C and 4/8-bit parallel 65, typ. U -40 to +85 Yes Yes I²C Fast Mode and 4/8-bit parallel 95, typ. U -40 to +85 32, driven by PCF8578 Interface Frame frequency [Hz] (internal osc) Packages Operating temperature [°C] Yes I²C Fast Mode 66 (typ.) U (chip with bumps) -40 to +85 No I²C 64 (typ.) VSO56, TQFP64 -40 to +85 Effective On-chip Temp Vlcd Vlcd comp [V] generator Seeing is believing - 3.5 - 9.0 No No I²C 64 (typ.) -40 to +85 LCD display driver solutions Graphic drivers Character drivers www.nxp.com © 2012 NXP Semiconductors N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The Date of release: January 2012 information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and Document order number: 9397 750 17231 may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof Printed in the Netherlands does not convey nor imply any license under patent- or other industrial or intellectual property rights. VSO56, TQFP64 Coming soon: Rec LCD display drivers Segment drivers NXP’s standalone LCD display drivers bring high reliability and low power consumption to a broad range of applications. They require few external components for operation, operate over a wide temperature range, support a wide range of supply voltages, and integrate vital interfaces. They are available in several different packages and delivery forms, to support various assembly technologies, and can be used in conjunction with an NXP RGB LED controller for LED backlighting. These peripheral devices can be interfaced to almost any LCD with low multiplex rates. They generate the drive signals for any static or multiplexed LCD, with up to four backplanes and up to 160 segments, making it possible to drive up to 640 elements at once. Some devices can be used to drive eight or 16 backplanes. Most drivers are easy to cascade together for use with larger LCDs. Most of the devices communicate via a two-line I²C-bus; a driver for the SPI bus is also available. Several features minimize communication overhead, including a display RAM with auto-incremented addressing, hardware sub-addressing, and display memory switching (in static and duplex drive modes). NXP’s portfolio includes segment, character, and graphic display drivers. NXP’s segment display drivers lead the industry in terms of the number of segments that can be driven per device. That means more information can be displayed, at a lower cost. For automotive applications, NXP even has options that are AEC-Q100 compliant, ensuring reliable operation under the harshest conditions. NXP’s character display drivers can be configured to drive almost any character set, including Japanese, and support a large number of icons. The graphic display drivers, for use with monochrome, dot-matrix LCDs, are available in two resolutions: 34 x 128, and 80 x 128. Key features } Standalone LCD controllers / drivers } No external components required } Low power consumption } Wide temperature range } Wide supply-voltage range } Various interfaces, including I²C-bus, SPI, and parallel } Suitable packages for different assembly technologies - TSSOP, QFP, and surface-mount for standard assembly - Bare die for chip-on-board (COB) modules - Bumped die for chip-on-glass (COG) modules - Bumped die for chip-on-flexfoil (COF) } Add NXP RGB LED controller for LED backlighting in any color Applications } eMetering (electricity, gas, water) } Automotive display clusters } Consumer electronics } White goods } Medical equipment } Telecommunication equipment } Industrial } Test & measurement } Simple graphical charts } Point-of-sale terminals The NXP I2C-bus LCD driver evaluation board (OM6290) demonstrates the features of NXP’s LCD drivers. The board contains three displays, each controlled by an I2C-bus LCD driver. One member of every driver family is present, thus there is one segment driver, one character driver and one graphic driver on board. In addition, the segment display has a backlight driven by LED driver PCA9633. All drivers are controlled by an LPC2148 microcontroller. Key features } Standalone LCD controller / driver }Industry-leading in terms of number of segments that can be driven per device } Internal LCD bias generation with voltage follower buffers } Internal oscillator, with external clock also possible } On-chip RAM with auto-incremental addressing for storing display data } Cascadable with auto-incremented display data loading across device sub-address boundaries } Versatile blinking modes } AEC-Q100 compliant options for automotive applications } Low power consumption } I²C-bus, C-bus or SPI-bus interface } Wide range of packages for different assembly technologies, including chip-on-glass (COG) NEW: PCA9620 – Automotive 60 x 8 segment driver for multiplex rates up to 1:8 This 60 x 8 LCD high-drive segment driver offers AEC-Q100 grade 2 compliance and is optimized for use in automotive applications such as instrument clusters, car radios, and climate-control units. It also supports displays in demanding industrial applications, including machine control systems and measuring equipment. The PCA9620 generates the drive signals for static or multiplexed LCD containing up to 8 backplanes, 60 segments, and 480 elements. Housed in a single LQFP80 package, it can drive almost any LCD with low multiplex rates. It is compatible with most microcontrollers and communicates via the two-line bidirectional 400 kHz I2C-bus. For more information log on to : http://www.standardics.nxp.com/support/boards/lcd. demo.board/ NEW: PCF8536 and PCA8536 – Automotive and industrial 40 x 8 segment driver with integrated PWM channels for LEDs This advanced, highly integrated LCD controller drives up to eight backplanes, up to 44 segments, and up to 320 elements. It includes an on-chip PWM controller for LED backlight illumination. The PWM controller has six outputs with 7-bit resolution (128 steps), and is ideal for driving external transistors. Up to six independent channels can be configured. The 128 levels per channel can control two RGB backlights with a spectrum of more than 2 million colors. Each channel can also be used for static LED drive or as a logic output. Communication overheads are minimized by using a 320-bit display RAM with auto-incremented addressing. The device is available in an industrial version (PCF8536, for white goods and consumer products) and in an automotive version (PCA8536, e.g. for car radios, climate control and dashboard displays). The automotive type supports an extended operating temperature range up to 95 °C, and is AEC-Q100 compliant. Both types of the peripheral device are equipped with a low-power serial interface: either the two-line bidirectional I2C-bus (400 kHz) or the three-line unidirectional SPI bus (5 MHz). The interface controls and drives almost any LCD display with multiplex rates up to 1:8. PCA8538 – Automotive 9 x 102 segment driver with AEC-Q100 grade 2 compliance } 918 elements } Temp range: -40 to +105 °C } Enhanced temp compensation - Programmable temp regions - Programmable compensation slope } Selectable backplane configuration: static, 2, 4, 6, 8, or 9 backplane multiplexing } Wide LCD voltage range from 4.0 to 12.0 V for TN LCDs } Programmable frame frequency from 45 to 300 Hz (factory calibrated) Coming soon: PCF8537 and PCA8537 – Industrial and automotive 8 x 44 segment driver with AEC-Q100 compliance } 352 elements } Temp range: -40 to +95 °C } Selectable backplane configuration: static, 2, 4, 6, or 8 backplane multiplexing } Integrated temp sensor with temperature read out } Programmable frame frequency from 60 Hz to 300 Hz (factory calibrated) Segment driver selection guide Multiplex rate versus number of segments Product 1:16 AECQ100 compliant SPIbus VDD1 C-bus I2C-bus I2C speed [min] (V) VDD1 [max] (V) IDD [typ] (µA) VLCD [min] (V) VLCD [max] (V) Tamb [min] (ºC) Tamb [max] (ºC) Cascade ffr for larger (Hz) conf 1:1 1:2 1:3 1:4 1:6 1:8 OM4068H 32 64 96 - - - - N Y - - - 2.5 5.5 12 3.5 6.5 -40 105 84 Y PCA85132U 160 320 480 640 - - - Y - - Y Fast 1.8 5.5 - 1.8 8 -40 95 SEL Y PCA85133U 80 160 240 320 - - - Y - - Y Fast 1.8 5.5 16 2.5 8 -40 95 SEL Y PCA85134H 60 120 180 240 - - - Y - - Y Fast 1.8 5.5 24 2.5 8 -40 95 82 Y PCA85162T 32 64 96 128 - - - Y - - Y Fast 1.8 5.5 - 2.5 8 -40 95 110 Y PCA85176H 40 80 120 160 - - - Y - - Y Fast 1.8 5.5 - 2.5 8 -40 95 82 Y PCA85176T 40 80 120 160 - - - Y - - Y Fast 1.8 5.5 - 2.5 8 -40 95 82 Y PCA85232U 160 320 480 640 - - - Y - - Y Fast 1.8 5.5 - 1.8 8 -40 95 SEL Y PCA8533U 80 160 240 320 - - - N - - Y Fast 1.8 5.5 - 2.5 6.5 -40 85 64 Y PCA8534AH 60 120 180 240 - - - Y - - Y Fast 1.8 5.5 8 2.5 6.5 -40 85 64 Y PCA8536AT - - - 176 252 320 - Y - - Y Fast 1.8 5.5 30 2.5 9 -40 95 SEL N PCA8536BT - - - 176 252 320 - Y Y - - - 1.8 5.5 30 2.5 9 -40 95 SEL N PCA8576CH 40 80 120 160 - - - Y - - Y Fast 2 6 - 2.5 6 -40 85 69 Y PCA8576DU 40 80 120 160 - - - Y - - Y Fast 1.8 5.5 18 2.5 6.5 -40 85 77 Y PCA9620H 60 120 - 240 320 480 - Y - - Y Fast 2.5 5.5 100 2.5 9 -40 105 SEL N PCA9620U 60 120 - 240 320 480 - Y - - Y Fast 2.5 5.5 100 2.5 9 -40 105 SEL N PCF2100CT - 40 - - - - - N - Y - - 2.25 6 - 2.25 6 -40 80 75 Y PCF2111CT - 64 - - - - - N - Y - - 2.25 6 - 2.25 6 -40 80 75 Y PCF2112CT 32 - - - - - - N - Y - - 2.25 6 - 2.25 6 -40 80 35 Y PCF85132U 160 320 480 640 - - - N - - Y Fast 1.8 5.5 - 1.8 8 -40 85 SEL Y PCF85133U 80 160 240 320 - - - N - - Y Fast 1.8 5.5 16 2.5 6.5 -40 85 SEL Y PCF85134HL 60 120 180 240 - - - N - - Y Fast 1.8 5.5 24 2.5 6.5 -40 85 82 Y PCF85162T 32 64 96 128 - - - N - - Y Fast 1.8 5.5 - 2.5 6.5 -40 85 82 Y PCF85176H 40 80 120 160 - - - N - - Y Fast 1.8 5.5 - 2.5 6.5 -40 85 82 Y PCF85176T 40 80 120 160 - - - N - - Y Fast 1.8 5.5 - 2.5 6.5 -40 85 82 Y PCF8532U 160 320 480 640 - - - N - - Y Fast 1.8 5.5 8 1.8 8 -40 85 SEL Y PCF8533U 80 160 240 320 - - - N - - Y Fast 1.8 5.5 - 2.5 6.5 -40 85 64 Y PCF8534AHL 60 120 180 240 - - - N - - Y Fast 1.8 5.5 8 2.5 6.5 -40 85 64 Y PCF8534AU 60 120 180 240 - - - N - - Y Fast 1.8 5.5 8 2.5 6.5 -40 85 64 Y PCF8536AT - - - 176 252 320 - N - - Y Fast 1.8 5.5 30 2.5 9 -40 85 SEL N N PCF8536BT - - - 176 252 320 - N Y - - - 1.8 5.5 30 2.5 9 -40 85 SEL PCF8562TT 32 64 96 128 - - - Y - - Y Fast 1.8 5.5 8 2.5 6.5 -40 85 77 Y PCF8566P 24 48 72 96 - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 69 Y PCF8566T 24 48 72 96 - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 69 Y PCF8566TS 24 48 72 96 - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 69 Y PCF8566U 24 48 72 96 - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 69 Y PCF8576CHL 40 80 120 160 - - - N - - Y Standard 2 6 - 2.5 6 -40 85 69 Y PCF8576CT 40 80 120 160 - - - N - - Y Standard 2 6 - 2.5 6 -40 85 69 Y PCF8576CU 40 80 120 160 - - - N - - Y Standard 2 6 - 2.5 6 -40 85 69 Y PCF8576DH 40 80 120 160 - - - Y - - Y Fast 1.8 5.5 18 2.5 6.5 -40 85 77 Y PCF8576DT 40 80 120 160 - - - Y - - Y Fast 1.8 5.5 2.7 2.5 6.5 -40 85 77 Y PCF8576DU 40 80 120 160 - - - N - - Y Fast 1.8 5.5 2.7 2.5 6.5 -40 85 77 Y PCF8576T 40 80 120 160 - - - N - - Y Standard 2 9 - 2 9 -40 85 64 Y PCF8577CT 32 64 - - - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 90 Y PCF8577CU 32 64 - - - - - N - - Y Standard 2.5 6 - 2.5 6 -40 85 90 Y