ds32069

A Product Line of
Diodes Incorporated
DXT2011P5
ADVANCE INFORMATION
100V NPN MEDIUM POWER LOW SATURATION TRANSISTOR
®
POWERDI 5
Features
Mechanical Data
•
•
•
•
BVCEO > 100V
IC = 6A High Continuous Collector Current
ICM = 10A Peak Collector Current
PD up to 3.2W
•
•
•
•
•
•
•
43% smaller than SOT223; 60% smaller than TO252
Maximum height just 1.1mm
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Case: PowerDI5
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin Plated Leads. Solderable per
MIL-STD-202, Method 208
Weight: 0.093 grams (approximate)
•
•
•
Applications
•
•
•
•
•
Motor Drive
Voltage Regulator using Emitter-Follower
DC-DC Converter
Telecoms
Power Management
C
POWERDI5
B
E
Device Schematic
Bottom View
Top View
Pin-Out
Top View
Ordering Information (Note 4)
Product
DXT2011P5-13
Notes:
Compliance
AEC-Q101
Marking
DXT2011
Reel size (inches)
13
Tape width (mm)
16
Quantity per reel
5,000
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
DXT2011
YYWWK
DXT2011 = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
1 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Characteristic
ADVANCE INFORMATION
Symbol
Value
Collector-Base Voltage
VCBO
200
V
Collector-Emitter Voltage
VCEO
100
V
Emitter-Base Voltage
VEBO
7
V
IC
6
A
ICM
10
A
Value
3.2
1.7
0.74
39
75
169
Unit
Continuous Collector Current
Peak Pulse Current
Unit
Thermal Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Power Dissipation
Thermal Resistance, Junction to Ambient Air
Thermal Resistance, Junction to Leads
Symbol
(Note 5)
(Note 6)
(Note 7)
(Note 5)
(Note 6)
(Note 7)
(Note 8)
Operating and Storage Temperature Range
PD
RθJA
RθJL
5.6
TJ, TSTG
-55 to +150
W
°C/W
°C
ESD Ratings (Note 9)
Characteristic
Electrostatic Discharge - Human Body Model
Electrostatic Discharge - Machine Model
Notes:
Symbol
Value
Unit
JEDEC Class
ESD HBM
ESD MM
4,000
400
V
V
3A
C
5. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured
under still air conditions whilst operating in a steady-state.
6. Same as note (5), except mounted on 25mm x 25mm 1oz copper.
7. Same as note (5), except mounted on minimum recommended pad (MRP) layout.
8. Thermal resistance from junction to solder-point (on the exposed collector pad).
9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
2 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
Thermal Characteristics and Derating Information
Max Power Dissipation (W)
IC Collector Current (A)
1
DC
1s
100m
100ms 10ms
1ms
100µs
Single Pulse. TA= 25°C
50mmX50mm 2oz Cu FR4
10m
100m
1
10
100
VCE Collector-Emitter Voltage (V)
3.0
50mmX50mm
2oz Cu FR4
2.5
2.0
25mmX25mm
1oz Cu FR4
1.5
MRP
1oz Cu
1.0
0.5
0.0
0
25
50mmX50mm
2oz Cu FR4
30
D=0.5
20
D=0.2
Single Pulse
10
0
100µ 1m
D=0.05
D=0.1
10m 100m
1
10
100
1k
Pulse Width (s)
125
150
175
10
1
100µ 1m
10m 100m
1
10
100
1k
Pulse Width (s)
Pulse Power Dissipation
4
180
TA= 25°C
TA= 25°C
Power Rating (W)
160
140
1 oz. weight Copper
120
100
80
60
20
10
100
Single Pulse. TA= 25°C
50mmX50mm 2oz Cu FR4
100
Transient Thermal Impedance
40
75
Derating Curve
Max Power Dissipation (W)
Thermal Resistance (°C/W)
40
50
Temperature (°C)
Safe Operating Area
Thermal Resistance (°C/W)
ADVANCE INFORMATION
3.5
VCE(sat)
10 Limited
2 oz. weight Copper
100
1000
10000
3
2 oz. weight Copper
2
1
1 oz. weight Copper
0
10
Copper Area (sq mm)
100
1000
10000
Copper Area (sq mm)
Thermal Resistance vs. Cu Area
Power Rating vs. Cu Area
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
3 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
Electrical Characteristics
(@TA = +25°C, unless otherwise specified.)
ADVANCE INFORMATION
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Collector-Base Breakdown Voltage
BVCBO
200
235
—
V
Collector-Emitter Breakdown Voltage (Note 10)
BVCEO
100
115
—
V
IC = 10mA
Emitter-Base Breakdown Voltage
BVEBO
7
8.1
—
V
IE = 100 µA
Collector Cutoff Current
ICBO
—
—
—
—
20
0.5
nA
µA
VCB = 150V
VCB = 150V, TAMB = 100°C
Collector Cutoff Current
ICER
R≤1kΩ
—
—
—
—
20
0.5
nA
µA
VCB = 150V
VCB = 150V, TAMB = 100°C
IC = 100µA
IEBO
—
—
10
nA
VEB = 6V
Collector-Emitter Saturation Voltage (Note 10)
VCE(sat)
—
—
—
—
21
50
95
180
35
65
125
220
mV
IC = 0.1A, IB = -5mA
IC = 1A, IB = 100mA
IC = 2A, IB = 100mA
IC = 5A, IB = 500mA
Base-Emitter Saturation Voltage (Note 10)
VBE(sat)
—
1020
1120
mV
IC = 5A, IB = 500mA
Base-Emitter Turn-On Voltage (Note 10)
VBE(on)
—
920
1000
mV
VCE = 2V, IC = 5A
hFE
100
100
30
10
—
—
—
—
—
300
—
—
—
—
—
—
VCE = 2V, IC = 10mA
VCE = 2V, IC = 2A
VCE = 2V, IC = 5A
VCE = 2V, IC = 10A
Transition Frequency
fT
—
130
—
MHz
Output Capacitance
Cobo
—
26
—
pF
VCB = 10V, f = 1MHz
ton
toff
—
—
41
1010
—
—
ns
VCC = 10V, IC = 1A,
IB1 = IB2 = 100mA
Emitter Cutoff Current
DC Current Gain (Note 10)
Switching Times
Note:
VCE = 10V, IC = 100mA,
f = 50MHz
10. Pulse Test: Pulse width ≤ 300µs. Duty cycle ≤ 2.0%.
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
4 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
0.6
1
Tamb=25°C
IC/IB=10
0.5
VCE(SAT) (V)
VCE(SAT) (V)
IC/IB=50
100m
IC/IB=20
IC/IB=10
0.4
100°C
0.3
25°C
0.2
0.1
-55°C
10m
1m
10m
100m
1
0.0
1m
10
10m
100m
1
10
IC Collector Current (A)
IC Collector Current (A)
VCE(SAT) v IC
VCE(SAT) v IC
250
200
1.0
0.8
150
25°C
0.6
100
0.4
-55°C
50
0.2
0.0
1m
10m
100m
0
10
1
IC/IB=10
1.2
VBE(SAT) (V)
100°C
Typical Gain (hFE)
Normalised Gain
1.4
VCE=2V
1.2
1.0
0.8 -55°C
0.6
25°C
100°C
0.4
1m
hFE v IC
1.4
10m
100m
1
10
IC Collector Current (A)
IC Collector Current (A)
VBE(SAT) v IC
VCE=2V
1.2
VBE(ON) (V)
ADVANCE INFORMATION
Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
1.0
0.8
0.6
0.4
-55°C
25°C
100°C
1m
10m
100m
1
10
IC Collector Current (A)
VBE(ON) v IC
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
5 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
ADVANCE INFORMATION
D
D2
A2
b2
L
E
E2
E1
W
L1
e
b1
b1
A2
POWERDI5
Dim
Min
Max
A
1.05
1.15
A2
0.33
0.43
b1
0.80
0.99
b2
1.70
1.88
D
3.90
4.05
D2
3.054 Typ
E
6.40
6.60
e
1.84 Typ
E1
5.30
5.45
E2
3.549 Typ
L
0.75
0.95
L1
0.50
0.65
W
1.10
1.41
All Dimensions in mm
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X
Dimensions
C
G
X
X1
Y
Y1
Y
X1
(2x)
Value (in mm)
1.840
0.852
3.360
1.390
4.860
1.400
G
Y1
(2x)
C
Note:
For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between
device Terminals and PCB tracking.
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
6 of 7
www.diodes.com
August 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2011P5
IMPORTANT NOTICE
ADVANCE INFORMATION
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
POWERDI is a registered trademark of Diodes Incorporated.
DXT2011P5
Document number: DS32069 Rev. 4 - 2
7 of 7
www.diodes.com
August 2014
© Diodes Incorporated