DZϮϬϭϬϬ>W^ ϮϬ^ƵƌĨĂĐĞDŽƵŶƚdƌĞŶĐŚ^ĐŚŽƚƚŬLJZĞĐƚŝĨŝĞƌϭϬϬs PRIMARY CHARACTERISTICS PD 16W VRRM 100V IO 20A VF 830mV TJ,Max 150℃ TO-277B PACKAGE 1 2 3 Marking code : CP20100S PIN 1 PIN 3 PIN 2 FEATURES MECHANICAL DATA Low forward voltage drop. Case：Molded plastic,TO-277B Excellent high temperature stability. Polarity：As Above Marked Fast switching capability. Lead : Solder plated , solderable per Moisture Sensitivity Level 1 MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant Mounting Position : Any ■ Maximum ratings and electrical characteristics Rating at 25 O C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol MBR20100S UNIT CP20100S Marking code Peak repetitive reverse voltage VRRM Working peak reverse voltage V RW M DC blocking voltage VRM 100 V IO 20 A Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) IFSM 250 A Thermal resistance(1) Junction to ambient RθJA 73 TJ, TSTG -40 ~ +150 Forward rectified current Operating and Storage temperature Parameter Forward voltage drop Reverse current Conditions I F = 20A, T J = 25 O C O V R = V R R M T J = 25 C Symbol MIN. TYP. O C/W O C MAX. UNIT VF 830 mV IR 0.1 mA Note : 1.FR-4 PCB, 2oz.Copper. 2015.01 www.willas.com.tw Rev. D01 P1 DZϮϬϭϬϬ>W^ ϮϬ^ƵƌĨĂĐĞDŽƵŶƚdƌĞŶĐŚ^ĐŚŽƚƚŬLJZĞĐƚŝĨŝĞƌϭϬϬs ■ Rating and characteristic curves Fig. 2 - Instantaneous Forward Characteristics 100 Instantaneous Forward Current,I F (A) Average Forward Current,I F (A) Fig.1 - Forward Current Derating Curve 25 20 15 10 5 0 25 50 75 100 125 150 175 10 T A =125°C 1 T A =100°C T A =85°C 0.1 T A =50°C T A =25°C 0.01 Case Temperature,T C ( O C) T A =150°C 0 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage,V F (Volts) Fig. 3 - Reverse Characteristics Instantaneous Reverse Current,I R (mA) 1000 100 O T A=1 50 C 10 O T A =1 25 C O T A= 1 0 0 1 C T A =85 C O 0.1 T A =50 C O 0.01 T A =25 C O 0.001 0 20 40 60 80 100 Reverse Voltage,V R (V) 2015.01 www.willas.com.tw Rev. D01 P2 DZϮϬϭϬϬ>W^ ϮϬ^ƵƌĨĂĐĞDŽƵŶƚdƌĞŶĐŚ^ĐŚŽƚƚŬLJZĞĐƚŝĨŝĞƌϭϬϬs Outline Drawing TO-277B .030(0.75) .041(1.05) .077(1.95) .065(1.65) .065(1.65) .077(1.96) .248(6.30) .264(6.70) .006(0.15) .017(0.43) .207(5.25) .228(5.80) .028(0.70) .051(1.30) .049(0.95) .049(1.25) .120(3.05) .145(3.69) .110(2.80) .126(3.20) .148(3.75) .169(4.30) .057(1.44) .069(1.74) Dimensions in inches and (millimeters) 2015.01 www.willas.com.tw Rev.A Rev. D01 P3 DZϮϬϭϬϬ>W^ ϮϬ^ƵƌĨĂĐĞDŽƵŶƚdƌĞŶĐŚ^ĐŚŽƚƚŬLJZĞĐƚŝĨŝĞƌϭϬϬs TO-277B 0(1.0 ) Suggested Soldering Pad Layout .264(6.70) .1(3.) . .039(1.00) Dimensions in inches and (millimeters) 2015.01 www.willas.com.tw .059(1.50) .192(4.90) .071(1.80) .150(3.80) RevA Rev. D01 P4 DZϮϬϭϬϬ>W^ ϮϬ^ƵƌĨĂĐĞDŽƵŶƚdƌĞŶĐŚ^ĐŚŽƚƚŬLJZĞĐƚŝĨŝĞƌϭϬϬs Ordering Information: Device PN MBR20100LPS ‐T(1)G(2 )‐WS Packing Tape&Reel: 5 Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.01 www.willas.com.tw Rev. D01 P5