WILLAS FM120-M+ MMBD3004S THRU HIGH VOLTAGE SURFACE MOUNT FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SWITCHING DIODE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H profile surface mounted • Low Switching Speed application in order to ·Fast optimize board space. ·High powerConductance loss, high efficiency. • Low current capability, low forward voltage drop. • High ·High Reverse Breakdown Voltage Rating • High surge capability. ·We declare that the material of product for overvoltage protection. • Guardring compliance with RoHS requirements. • Ultra high-speed switching. · Moisture Sensitivity Level 1 silicon junction. epitaxial planar chip, metal • Silicon parts meet environmental standards of • Lead-free Ordering Information(Pb-free) • 0.146(3.7) 0.130(3.3) 0.071(1.8) 0.056(1.4) SOT –23 MIL-STD-19500 /228 RoHS product for packing code suffix "G" Marking Device Halogen free product for packing code suffix "H" MMBD3004S KAE Mechanical data Pb-Free package is available 0.012(0.3) Typ. Shipping 3000 / Tape &Reel 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant RoHS product for packing code suffix ”G” • Case : Molded plastic, SOD-123H Halogen free product for packing code suffix “H” , • Terminals :Plated terminals, solderable per MIL-STD-750 CAHODE/ANODE 3 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band Position : Any @ TA=25℃ unless otherwise specified • Mounting Maximum Ratings • Weight : Approximated 0.011 gram Characteristic Symbol CATHODE Dimensions in inches and (millimeters) MMBD3004S Unit Repetitive Peak Reverse Voltage AND ELECTRICAL CHARACTERISTICS VRRM 350 MAXIMUM RATINGS Ratings atWorking 25℃ ambient temperature unless otherwise specified. Peak Reverse Voltage Single phase half wave, 60Hz, resistive of inductive load. DC Blocking Voltage For capacitive load, derate current by 20% RMS Reverse Voltage RATINGS Forward Continuous Current(Note 2) VR(RMS) IF 14 VRMS @t=1.0µs Forward Surge Current VDC 13 30 IFRM 14 40 15 50 21 28 35 40 50 IFSM 30 20 @t=1.0s IO Peak Forward Surge Current 8.3 ms single half sine-wave IFSM Thermal Resistance Junction to Ambient Air(Note 2) Maximum Average Forward Rectified Current VR 12 20 Maximum Recurrent Peak Reverse Voltage Peak Repetitive Forward Current(Note 2) VRRM Maximum DC Blocking Voltage VRWM V 300 V 212 V SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH U Marking Code Maximum RMS Voltage Non-Repetitive Peak Power Dissipation(Note 2) superimposed on rated load (JEDEC method) Operating and Storage Temperature RangeRΘJA Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ 225 16 625 60 18 80 4.0 42 60 56 1.0 Pd 350 R0JA 357 Tj , TSTG Typical Thermal Resistance (Note 2) mA 1.0 30 Characteristic ReverseCHARACTERISTICS Breakdown Voltage(Note 1) TSTG Symbol Maximum Average Reverse Current at @T A=25℃ Forward Voltage(Note 1) Rated DC Blocking Voltage @T A=125℃ IR 0.50 VF NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Reverse Current(Note 1) IR Total Capacitance CT Reverse Recovery Time Trr 2- Thermal Resistance From Junction to Ambient Typ Unit 2012-1 140 V 150 200 V A A ℃ ℃ P -55 to +150 - 65 to +175 Test Condition 0.70 0.87 0.93 1.0 1.03 1.25 30 100 nA VR=240V 35 100 µA VR=240V, Tj=150℃ 1.0 5.0 Pf VR=0V, f=1.0MHZ 50 ns V IF=20mA 0.85 0.78 0.9 0.92 0.5 IF10 =100mA V m IF=200mA Notes: 1. Short duration test pulse used to minimize self-heating effect. 2. Part mounted on FR-4 board with recommended pad layout. 2012-06 105 ℃/W MAX V 70 FM120-MH FM130-MH FM140-MH FM150-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH U V(BR) R 350 V FM160-MH IR=100µA SYMBOL VF Maximum Forward Voltage at 1.0A DC Min 120 200 mW 120 -55 to +125 115 150 A100 80 -55 to +150 40 10 100 mA Electrical Characteristics @ TA=25℃ unless otherwise specified, per element Storage Temperature Range 0.031(0.8) Typ. 2 1 ANODE IF=IR=30mA Irr=3.0mA, RL=100Ω WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ MMBD3004S THRU HIGH VOLTAGE SURFACE MOUNT FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SWITCHING DIODE Pb Free Product SOD-123+ PACKAGE Package outline Features better reverse leakage current and thermal resistance. 500 • Low profile surface mounted application in order to optimize board space. Pd, POWER DISSIPATION (mW) • Low power loss, high efficiency. High current capability, low forward voltage drop. • 400 • High surge capability. • Guardring for overvoltage protection. Ultra high-speed switching. • 300 • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of MIL-STD-19500 /228 200 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 100 • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , 0 • Terminals :Plated terminals, solderable per MIL-STD-750 0 100 Method 2026 TA, AMBIENT TEMPERATURE, (°C) IF, INSTANTANEOUS FORWARD CURRENT (mA) • Batch process design, excellent power dissipation offers Tj = 75°C 10 0.071(1.8) 0.056(1.4) Tj = 25°C 1.0 0.1 0.040(1.0) 0.024(0.6) 0.01 0.031(0.8) Typ. 0 0.031(0.8) Typ. 400 1600 1200 800 2000 1.1 CHARACTERISTICS CT, TOTAL CAPACITANCE (pF) RATINGS 0.012(0.3) Typ. Tj = 150°C VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Dimensions inches and (millimeters) Fig. 2 Typical ForwardinCharacteristics, per element Tj = 150°C MAXIMUM RATINGS AND ELECTRICAL 100 Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. 10 For capacitive load, derate current by 20% 1.0 0.146(3.7) 0.130(3.3) 100 200 • Polarity Fig. : Indicated cathode bandtotal package 1 Powerby Derating Curve, • Mounting Position : Any 1000 • Weight : Approximated 0.011 gram SOD-123H 1000 1.0 FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN SYMBOL FM120-MH FM130-MH0.9 Marking Code VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Vol VRMS 14 21 28 35 42 56 70 105 140 Vol Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Vol Maximum0.01 Average Forward Rectified Current IO IFSM Maximum Recurrent Peak Reverse Voltage Maximum 0.1 RMS Voltage Tj = 25°C Peak Forward Surge Current 8.3 ms single half sine-wave 0.001 superimposed on rated load (JEDEC method) 0 100 150 300 350 RΘJA (V) Typical JunctionVCapacitance (Note 1) REVERSE VOLTAGE CJ R, INSTANTANEOUS Fig. 3 Typical Reverse Characteristics, per element Operating Temperature Range TJ 50 Typical Thermal Resistance (Note 2) 200 250 Storage Temperature Range 0.8 0.7 0.01 0.1 1.0 30 Am 10 1.0 Am 100 ℃/W 40 VOLTAGE (V) VR, REVERSE 120 Total Capacitance Fig. 4 Typical vs. Reverse Voltage, per-55 element to +150 -55 to +125 PF ℃ - 65 to +175 TSTG ℃ CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.5 0.9 0.92 Vol 10 mAm NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-1 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ MMBD3004S THRU HIGH VOLTAGE SURFACE MOUNT FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SWITCHING DIODE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards ofSOT-23 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 Halogen free product for packing code suffix "H" Mechanical data 0.031(0.8) Typ. • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS Marking Code .080(2.04) .070(1.78) .008(0.20) SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UN .003(0.08) 18 Maximum Recurrent Peak Reverse Voltage VRRM 12 20 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Vo Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Vo Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave .004(0.10)MAX. superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) CJ Typical Junction Capacitance (Note 1) TJ Operating Temperature Range Storage Temperature Range TSTG CHARACTERISTICS Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 14 40 15 50 16 60 80 10 100 115 150 120 200 Vo 1.0 30 40 120 -55 to +125 Am Am ℃/ P -55 to +150 ℃ - 65 to +175 .020(0.50) .012(0.30) SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH VF Maximum Forward Voltage at 1.0A DC 13 30 .055(1.40) .035(0.89) Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% .083(2.10) Dimensions in inches and (millimeters) .110(2.80) Method 2026 .063(1.60) .047(1.20) • Epoxy : UL94-V0 rated flame retardant .122(3.10) • Case : Molded plastic, SOD-123H , .106(2.70) • Terminals :Plated terminals, solderable per MIL-STD-750 .006(0.15)MIN. • RoHS product for packing code suffix "G" IR Dimensions @T A=125℃ 0.50 0.70 0.85 0.5 in inches and (millimeters) 0.9 0.92 ℃ UN Vo 10 mA NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-1 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU MMBD3004S HIGH VOLTAGE SURFACE MOUNT FM1200-M+ 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SWITCHING DIODE Pb Free Product SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. Ordering Information: 0.146(3.7) • Low power loss, high efficiency. 0.130(3.3) Device PN Packing • High current capability, low forward voltage drop. (1) (2) capability. • High surge Tape&Reel: 3 Kpcs/Reel MMBD3004S‐T G ‐WS • Guardring for overvoltage protection. Note: (1) Packing code, Tape&Reel Packing switching. • Ultra high-speed epitaxial planar chip, metal silicon junction. • Silicon (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” • Lead-free parts meet environmental standards of 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" free product for packing code suffix "H" Halogen Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Dimensions in inches and (millimeters) ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS specification herein, to make corrections, modifications, enhancements or other Ratings at 25℃ ambient temperature unless otherwise specified. changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. load, derate current by 20% for any errors or inaccuracies. Data sheet specifications and its information For capacitive SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNI RATINGS contained are intended to provide a product description only. "Typical" parameters Marking Code 12 13 14 15 16 18 10 115 120 which may be included on WILLAS data sheets and/ or specifications can 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage Volts VRRM Volts 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage V RMS and do vary in different applications and actual performance may vary over time. Volts Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC WILLAS does not assume any liability arising out of the application or Amp Maximum Average Forward Rectified Current IO 1.0 use of any product or circuit. Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM Amp on rated load (JEDEC method) superimposed ℃/W 40 Typical Thermal Resistance (Note 2) RΘJA WILLAS products are not designed, intended or authorized for use in medical, PF 120 Typical Junction Capacitance (Note 1) CJ life‐saving implant or other applications intended for life‐sustaining or other related -55 to +125 -55 to +150 Operating Temperature Range TJ ℃ - 65 to +175 Storage Temperature Range TSTG ℃ applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH UNIT Volts 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 of WILLAS. Customers using or selling WILLAS components for use in 0.5 Maximum Average Reverse Current at @T A=25℃ IR mAm such applications do so at their own risk and shall agree to fully indemnify WILLAS 10 @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-1 WILLAS ELECTRONIC CORP. WILLAS ELECTRONIC CORP.