download 692121230100.pdf

1
2
3
4
5
TECHNICAL CHARACTERISTICS
MATERIAL
INSULATOR: LCP
FLAMMABILITY RATING: UL94-V0
COLOR: BLUE
CONTACT MATERIAL: PHOSPHOR BRONZE
CONTACT TYPE: STAMPED
CONTACT PLATING: UNDERPLATE 1.27 to 2.54 µm Ni
CONTACT AREA 0.76 µm Gold
SOLDER TAIL AREA 2.54 to 5.08 µm Matt Tin
SHIELDING: BRASS MATT TIN PLATED
QUALITY CLASS: 5000 MATING CYCLES
CUT OUT PCB
PCB LAYOUT * - COMPONENT VIEW
A
ENVIRONMENTAL
OPERATING TEMPERATURE: -20°C up to +85°C
COMPLIANCE: LEAD FREE & RoHS
ELECTRICAL
CURRENT RATING:
- PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A MAX
- OTHER PINS 0.25 A MAX
WORKING VOLTAGE: 30 VAC
DIELECTRIC WITHSTANDING VOLTAGE: 100 VAC/MIN
INSULATION RESISTANCE: > 100 MΩ
CONTACT RESISTANCE:
- PIN 1 & PIN 4: 30 mΩ MAX
- OTHER PINS: 50 mΩ MAX
B
STANDARD
CERTIFIED: E323964
MECHANICAL
INSERTION FORCE: 35.0N MAX
EXTRACTION FORCE: 10.0N MIN
SOLDERING
JEDEC LEAD FREE WAVE SOLDERING
C
PACKAGING
TAPE & REEL
RoHS Compliant
G
F
E
* NOTE: THE RECOMMENDED PCB LAYOUT IS FOR AN OPTIMIZED RETENTION FORCE OF CONNECTOR ON PCB BUT IT IMPLIES INSERTION FORCE THAT A LOT OF PICK AND PLACE MACHINES ARE NOT ABLE TO HANDLE. THEREFORE IT MIGHT BE NECESSARY TO
DRILL BIGGER HOLES FOR THE CLIPS. PLEASE CHECK THIS CARFULLY.
27-OCT-14
GENERAL UPDATE
AS
01-APR-14
12-AUG-13
SOLDERING
CHARACTERISTIC
QL
QL
GG
PROJECTION:
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
D
09-NOV-11
STENCIL
C
21-SEP-11
NOTE
GG
B
10-MAY-11
UL
GG
SCALE:
DESCRIPTION: WR-COM - USB 3.0 HORIZONTAL TYPE A
WITH OFFSET 1.04 MM
A
16-SEP-10
PDF
JP
SHEET: 1/3
REV
DATE
BY
DRAW: AS
WERI PART NO: 692 121 230 100
FILE
APPROVAL: NPr
UNIT: MM
SIZE
A4
D
1
2
3
4
5
A
B
C
RoHS Compliant
PROJECTION:
G
F
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
E
D
C
APPROVAL: NPr
B
A
REV
DATE
FILE
BY
SCALE:
DESCRIPTION: WR-COM - USB 3.0 HORIZONTAL TYPE A
WITH OFFSET 1.04 MM
SHEET: 2/3
WERI PART NO: 692 121 230 100
UNIT: MM
DRAW: AS
SIZE
A4
D
1
2
3
4
5
Cautions and Warnings:
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher safety
and reliability are especially required or if there is possibility of direct damage or injury to human body,
Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical circuits
that require high safety, reliability functions or performance, the sufficient reliability evaluation-check
for the safety must be performed before by the user before usage.
A
B
C
RoHS Compliant
PROJECTION:
G
F
GENERAL TOLERANCE
.X = +/- 0.2
.XX = +/- 0.15
E
D
C
APPROVAL: JC
B
UNIT: MM
DESCRIPTION: DISCLAIMER
SIZE
WERI PART NO: DISCLAIMER
A4
SCALE:
A
10-SEP-14
PDF
QL
SHEET: 3/3
REV
DATE
FILE
BY
DRAW: QL
D
Similar pages