INTEGRATED CIRCUITS 74LV04 Hex inverter Product specification Supersedes data of 1997 Feb 03 IC24 Data Handbook 1998 Apr 20 Philips Semiconductors Product specification Hex inverter 74LV04 FEATURES DESCRIPTION • Wide operating voltage: 1.0 to 5.5 V • Optimized for low voltage applications: 1.0 to 3.6 V • Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V • Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V, The 74LV04 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC/HCT04. The 74LV04 provides six inverting buffers. Tamb = 25°C • Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V, Tamb = 25°C • Output capability: standard • ICC category: SSI QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf 2.5 ns PARAMETER SYMBOL tPHL/tPLH Propagation delay nA to nY CI Input capacitance CPD CONDITIONS CL = 15 pF; VCC = 3.3 V Power dissipation capacitance per gate See Notes NO TAG and 2 TYPICAL UNIT 6 ns 3.5 pF 21 pF NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in µW) PD = CPD VCC2 fi (CL VCC2 fo) where: fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL VCC2 fo) = sum of the outputs. 2. The condition is V1 is V1 = GND to VCC. ORDERING INFORMATION PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 14-Pin Plastic DIL –40°C to +125°C 74LV04 N 74LV04 N SOT27-1 14-Pin Plastic SO –40°C to +125°C 74LV04 D 74LV04 D SOT108-1 14-Pin Plastic SSOP Type II –40°C to +125°C 74LV04 DB 74LV04 DB SOT337-1 14-Pin Plastic TSSOP Type I –40°C to +125°C 74LV04 PW 74LV04PW DH SOT402-1 PIN DESCRIPTION FUNCTION TABLE PIN NUMBER SYMBOL 1, 3, 5, 9, 11, 13 1A – 6A Data inputs FUNCTION 2, 4, 6, 8, 10, 12 1Y – 6Y Data outputs 7 GND Ground (0 V) 14 VCC Positive supply voltage 1998 Apr 20 INPUTS OUTPUTS nA nY L H H L NOTES: H = HIGH voltage level L = LOW voltage level 2 853–1900 19257 Philips Semiconductors Product specification Hex inverter 74LV04 PIN CONFIGURATION LOGIC SYMBOL 1A 1 14 V CC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y 1 1A 1Y 2 3 2A 2Y 4 5 3A 3Y 6 9 4A 4Y 8 11 5A 5Y 10 13 6A 6Y 12 SV00396 LOGIC SYMBOL (IEEE/IEC) 1 1 2 3 1 4 5 1 6 9 1 8 11 1 10 13 1 12 SV00397 LOGIC DIAGRAM (ONE INVERTER) A Y SV00399 SV00398 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC PARAMETER DC supply voltage CONDITIONS MIN TYP MAX UNIT 1.0 3.3 5.5 V VI Input voltage 0 – VCC V VO Output voltage 0 – VCC V +85 +125 °C 500 200 100 50 ns/V Tamb Operating ambient temperature range in free air tr, tf Input rise and fall times See NoteNO TAG See DC and AC characteristics –40 –40 VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V to 5.5V – – – – – – – – NOTE: 1. The LV is guaranteed to function down to VCC = 1.0V (input levels GND or VCC); DC characteristics are guaranteed from VCC = 1.2V to VCC = 5.5V. 1998 Apr 20 3 Philips Semiconductors Product specification Hex inverter 74LV04 ABSOLUTE MAXIMUM RATINGSNO TAG, NO TAG In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). PARAMETER SYMBOL VCC DC supply voltage IIK DC input diode current IOK IO IGND, ICC Tstg PTOT CONDITIONS RATING UNIT –0.5 to +7.0 V VI < –0.5 or VI > VCC + 0.5V 20 mA DC output diode current VO < –0.5 or VO > VCC + 0.5V 50 mA DC output source or sink current – standard outputs –0.5V < VO < VCC + 0.5V 25 DC VCC or GND current for types with – standard outputs mA mA 50 Storage temperature range °C –65 to +150 Power dissipation per package – plastic DIL – plastic mini-pack (SO) – plastic shrink mini-pack (SSOP and TSSOP) for temperature range: –40 to +125°C above +70°C derate linearly with 12 mW/K above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K 750 500 400 mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER -40°C to +85°C TEST CONDITIONS MIN VIH VIL HIGH level Input voltage LOW level Input voltage TYP. NO TAG VOH VOL VOL 1998 Apr 20 HIGH level output voltage; g STANDARD outputs LOW level output voltage all outputs out uts voltage; LOW level output voltage; g STANDARD outputs MIN 0.9 0.9 VCC = 2.0V 1.4 1.4 VCC = 2.7 to 3.6V 2.0 2.0 VCC = 4.5 to 5.5V 0.7VCC UNIT MAX V 0.7VCC VCC = 1.2V 0.3 0.3 VCC = 2.0V 0.6 0.6 VCC = 2.7 to 3.6V 0.8 0.8 0.3VCC 0.3VCC VCC = 1.2V; VI = VIH or VIL; –IO = 100µA HIGH level output voltage out uts voltage; all outputs MAX VCC = 1.2V VCC = 4.5 to 5.5 VOH -40°C to +125°C V 1.2 VCC = 2.0V; VI = VIH or VIL; –IO = 100µA 1.8 2.0 1.8 VCC = 2.7V; VI = VIH or VIL; –IO = 100µA 2.5 2.7 2.5 VCC = 3.0V; VI = VIH or VIL; –IO = 100µA 2.8 3.0 2.8 VCC = 4.5V; VI = VIH or VIL; –IO = 100µA 4.3 4.5 4.3 VCC = 3.0V; VI = VIH or VIL; –IO = 6mA 2.40 2.82 2.20 VCC = 4.5V; VI = VIH or VIL; –IO = 12mA 3.60 4.20 3.50 V V VCC = 1.2V; VI = VIH or VIL; IO = 100µA 0 VCC = 2.0V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VCC = 2.7V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VCC = 3.0V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VCC = 4.5V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VCC = 3.0V; VI = VIH or VIL; IO = 6mA 0.25 0.40 0.50 VCC = 4.5V; VI = VIH or VIL; IO = 12mA 0.35 0.55 0.65 V V 4 Philips Semiconductors Product specification Hex inverter 74LV04 DC ELECTRICAL CHARACTERISTICS (Continued) Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER -40°C to +85°C TEST CONDITIONS MIN TYP. -40°C to +125°C MAX NO TAG MIN UNIT MAX Input leakage current VCC = 5.5V; VI = VCC or GND 1.0 1.0 µA ICC Quiescent supply current; SSI VCC = 5.5V; VI = VCC or GND; IO = 0 20.0 40 µA ∆ICC Additional quiescent supply current VCC = 2.7V to 3.6V; VI = VCC – 0.6V 500 850 µA II NOTE: 1. All typical values are measured at Tamb = 25°C. AC CHARACTERISTICS GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF; RL = 1KΩ LIMITS CONDITION SYMBOL PARAMETER –40 to +85°C WAVEFORM VCC(V) Propagation delay nA to nY tPHL/tPLH TYP MIN NO TAG –40 to +125°C MAX MIN 1.2 40 2.0 14 20 25 2.7 10 15 19 3.0 to 3.6 8NO TAG 12 15 9 11 Figure 1 4.5 to 5.5 UNIT MAX ns NOTES: 1. Unless otherwise stated, all typical values are measured at Tamb = 25°C 2. Typical values are measured at VCC = 3.3 V. AC WAVEFORMS TEST CIRCUIT VM = 1.5 V at VCC ≥ 2.7 V and ≤ 3.6 V; VM = 0.5 × VCC at VCC < 2.7 V and ≥ 4.5 V; VOL and VOH are the typical output voltage drop that occur with the output load. Vcc Vl VI nA INPUT VO PULSE GENERATOR VM(1) D.U.T. 50pF RT CL GND t PHL t PLH VOH(2) nY OUTPUT Test Circuit for Outputs VM(1) DEFINITIONS VOL(2) RL = Load resistor SV00395 Figure 1. RL= 1k CL = Load capacitance includes jig and probe capacitiance RT = Termination resistance should be equal to ZOUT of pulse generators. Input (nA) to output (nY) propagation delays and output transition times. TEST tPLH/tPHL VCC VI < 2.7V VCC 2.7–3.6V 2.7V ≥ 4.5 V VCC SV00902 Figure 2. Load circuitry for switching times 1998 Apr 20 5 Philips Semiconductors Product specification Hex inverter 74LV04 DIP14: plastic dual in-line package; 14 leads (300 mil) 1998 Apr 20 6 SOT27-1 Philips Semiconductors Product specification Hex inverter 74LV04 SO14: plastic small outline package; 14 leads; body width 3.9 mm 1998 Apr 20 7 SOT108-1 Philips Semiconductors Product specification Hex inverter 74LV04 SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm 1998 Apr 20 8 SOT337-1 Philips Semiconductors Product specification Hex inverter 74LV04 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm 1998 Apr 20 9 SOT402-1 Philips Semiconductors Product specification Hex inverter 74LV04 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Formative or in Design This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. Preliminary Specification Preproduction Product This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product Specification Full Production This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 print code Document order number: 1998 Apr 20 10 Date of release: 05-96 9397-750-04404