BGO807; BGO807/FC0; BGO807/SC0 870 MHz optical receivers Rev. 01 — 7 July 2004 Product data sheet 1. Product profile 1.1 General description High dynamic range optical receiver amplifier modules in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC connector. The amplifier supply voltage pin and the photo diode bias voltage pin both connect to 24 V (DC). The modules have a mono mode optical input suitable for 1290 nm to 1600 nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75 Ω. CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. MSC895 1.2 Features ■ ■ ■ ■ ■ ■ ■ Excellent linearity Low noise Excellent flatness Standard CATV outline Rugged construction Gold metallization ensures excellent reliability High optical input power range. 1.3 Applications ■ CATV optical node systems operating in the 40 MHz to 870 MHz frequency range. BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter Conditions f frequency range s22 output return losses Min Typ Max Unit 40 - 870 MHz f = 40 MHz to 870 MHz 11 - - dB 45 - - dB d2 optical input return losses second order distortion f = 854.5 MHz - - −55 dB F equivalent noise input f = 40 MHz to 870 MHz - - 8.5 pA/√Hz Itot total current consumption (DC) VB = 24 V 175 - 205 mA 2. Pinning information Table 2: Pinning Pin Description 1 monitor current 2 common 3 common 4 +VB of the photo diode 5 +VB of the amplifier 7 common 8 common 9 output 1 1 2 3 4 5 7 8 2 3 4 5 7 8 1 9 4 5 7 8 9 Side view mbk044 mbl040 Fig 1. Simplified outline SOT115T. (BGO807). Fig 2. Simplified outline SOT115X. (BGO807/FC0). 9397 750 13192 Product data sheet 3 9 Side view Side view 2 mbl041 Fig 3. Simplified outline SOT115Y. (BGO807/SC0). © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 2 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 3. Ordering information Table 3: Ordering information Type number Package Name Description Version BGO807 - rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 × SOT115T 6-32 UNC and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads BGO807/FC0 - rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 × SOT115X 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads BGO807/SC0 - rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 × SOT115Y 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads 4. Limiting values Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Min Max Unit f frequency range Conditions 40 870 MHz Tstg storage temperature −40 +85 °C Tmb operating mounting base temperature −20 +85 °C Pin optical input power continuous - 5 mW ESD ESD sensitivity human body model; R = 1.5 kΩ; C = 100 pF 500 - V 5. Characteristics Table 5: Characteristics In accordance with the Absolute Maximum Rating System (IEC 60134); bandwidth 40 MHz to 870 MHz; VB = 24 V; Tmb = 30 °C; ZL = 75 Ω. Symbol Parameter Conditions Min Typ Max Unit S responsivity BGO807 λ = 1300 nm 800 - - V/W BGO807/FC0; BGO807/SC0 λ = 1300 nm 750 - - V/W FL flatness straight line (peak to valley) f = 40 MHz to 870 MHz - - 1 dB SL slope straight line f = 40 MHz to 870 MHz 0 - 2 dB s22 output return losses f = 40 MHz to 870 MHz optical input return losses d2 d3 second order distortion third order distortion - - dB - - dB fm = 446.5 MHz [1] [2] - - −66 dB fm = 746.5 MHz [1] [3] - - −61 dB fm = 854.5 MHz [1] [4] - - −55 dB fm = 853.25 MHz [5] [6] - - −71 dB 9397 750 13192 Product data sheet 11 45 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 3 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers Table 5: Characteristics …continued In accordance with the Absolute Maximum Rating System (IEC 60134); bandwidth 40 MHz to 870 MHz; VB = 24 V; Tmb = 30 °C; ZL = 75 Ω. Symbol Parameter Conditions Min Typ Max Unit F equivalent noise input f = 40 MHz to 450 MHz - - 7 pA/√Hz f = 450 MHz to 750 MHz - - 8 pA/√Hz f = 750 MHz to 870 MHz - - 8.5 pA/√Hz λ = 1310 ±20 nm 0.85 - - A/W λ = 1550 ±20 nm 0.9 - - A/W 1290 - 1600 nm 1 - - m spectral sensitivity sλ λ optical wavelength L length of optical fiber; SM type; 9/125 µm BGO807 BGO807/FC0; BGO807/SC0 746 - 861 mm Itot total current consumption (DC) 175 - 205 mA Ibias diode bias current at pin 4 (DC) - - 25 mA [1] Two laser test; each laser with a modulation index of 40%; Popt = 1 mW (total). [2] fm = 446.5 MHz; fp = 97.25 MHz; fq = 349.25 MHz. [3] fm = 746.5 MHz; fp = 133.25 MHz; fq = 613.25 MHz. [4] fm = 854.5 MHz; fp = 133.25 MHz; fq = 721.25 MHz. [5] Three laser test; each laser with a modulation index of 60%; Popt = 1 mW (total). [6] fm = 853.25 MHz; fp = 133.25 MHz; fq = 265.25 MHz; fr = 721.25 MHz. Pin 1 10 kΩ photo current 1 kΩ mlb151 Fig 4. Monitor current pin. 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 4 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 6. Package outline Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads N D N1 N2 E S2 SOT115T Z p M M1 M2 A2 1 2 3 4 5 7 8 9 A S1 L F S W c e b w M e1 d U2 B q2 Q y M B q1 x M B y M B p U1 q 0 5 S1 10 mm U1 U2 16.7 4.95 44.75 16.1 4.55 44.25 scale optical input S2 8.2 7.8 x y Z max. 6-32 0.25 UNC 0.7 0.1 12 q1 q2 S W w DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 M2 N min. N1 N2 p Q max. 8.8 2.5 1.6 0.9 1000 10.7 0.0 5 0 4.15 3.85 2.4 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION q 38.1 25.4 10.2 4.2 ISSUE DATE 01-08-10 04-02-04 SOT115T Fig 5. Package outline SOT115T. 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 5 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads E SOT115X N1 N2 D S2 Z p M M1 M2 A2 1 2 3 4 5 7 8 9 A S1 L F S c W e b d U2 B w M e1 Q q2 y M B q1 y M B x M B p N R U1 q 0 25 mm Scale 0 5 10 mm S scale 4.2 connector S1 S2 U1 U2 16.7 4.95 44.75 16.1 4.55 44.25 8.2 7.8 DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 M2 8.8 2.5 1.6 0.9 REFERENCES IEC JEDEC JEITA N N1 861 10.7 746 0.0 x y Z max. 6-32 0.25 UNC 0.7 0.1 12 q1 q2 R min. W N2 p Q max. 5 0 4.15 3.85 2.4 EUROPEAN PROJECTION w q 38.1 25.4 10.2 35 ISSUE DATE 01-08-10 04-02-04 SOT115X Fig 6. Package outline SOT115X. 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 6 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads E SOT115Y N1 N2 D S2 Z p M M1 M2 A2 1 2 3 4 5 7 8 9 A S1 L F S c W e b d U2 B w M e1 Q q2 y M B q1 y M B x M B p N R U1 q 0 25 mm Scale 0 5 10 mm S scale connector S1 S2 U1 x y Z max. 8.2 6-32 0.25 7.8 UNC 0.7 0.1 12 q1 q2 R min. U2 4.2 16.7 4.95 44.75 16.1 4.55 44.25 W w DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 M2 8.8 2.5 1.6 0.9 REFERENCES IEC JEDEC JEITA N N1 861 10.7 746 0.0 N2 p Q max. 5 0 4.15 3.85 2.4 EUROPEAN PROJECTION q 38.1 25.4 10.2 35 ISSUE DATE 01-08-10 04-02-05 SOT115Y Fig 7. Package outline SOT115Y. 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 7 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 7. Handling information Fiberglass optical coupling: maximum tensile strength = 5 N; minimum bending radius = 35 mm. 8. Revision history Table 6: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes BGO807_FC0_SC0_1 20040707 Product data sheet - 9397 750 13192 - 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 8 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 9. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions 11. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 12. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13192 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 7 July 2004 9 of 10 BGO807/BGO807/FC0/SC0 Philips Semiconductors 870 MHz optical receivers 13. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Handling information. . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 2 2 3 3 3 5 8 8 9 9 9 9 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 7 July 2004 Document order number: 9397 750 13192 Published in The Netherlands