Panel Mount Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Panel Plugs With Socket Contacts, Crimp Termination, 790-027S A 790-027S connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. These connectors feature machined aluminum shells and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Attach optional shielding adapters (799-016) for EMI protection. B C D How To Order 790-027S H-66 Part Number Shell Size Insert Arr. 790-027S Rear Panel Mounted Plug with Socket Contacts E See Table 1 for Available Insert Arrangements To order a connector without size #16 or #12 power pins, substitute “W” instead of “P” in the insert arrangement. Example: 36P2 is supplied with 2 power pins. F 36W2 is supplied less the power pins. See Section B for coaxial contacts purchased separately. G H Sample Part Number M E P Shell Finish EMI Spring Hardware Option M E Electroless Nickel EMI Spring MT N general purpose applications Nickel-PTFE N No Hardware No Spring 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) EMI SPRING G Guide Pin ZNU Zinc-Nickel with Black Chromate tactical applications (non-reflective black) P Female Jackpost Additional shell finishes are listed on page C-9. S Female Guide Socket Specifications INDEX Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration © 2009 Glenair, Inc. Materials and Finishes #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. Shell Contacts Insulators Retention Clips Grommet Hardware Panel Gasket Aluminum alloy Copper alloy, 50 microinches gold plated, stainless steel hood Liquid crystal polymer (LCP) Beryllium copper alloy Flourosilicone rubber 300 series stainless steel Fluorosilicone, conductive Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-6 Rev. 04-July-2009 E-Mail: [email protected] Table 1 Contact Arrangements Layout A-5 Contact Quantity #23 #16 #12 5 B-2P2 Face View Cross-Sectional View of 790-027S RETAINING CLIP FRONT INSULATOR 9 C-13 13 D-15 15 D-3P3 A .183 (4.65) .025 (0.64) REAR INSULATOR EMI GASKET GROMMET EMI SPRING 2 B-9 Panel Mount Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination POTTING SOCKET CONTACT WIRE (REF.) 3 D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 SHELL .007 (0.18) D 3 23 F-5P5 5 G-33 33 H-10P4 6 N 4 H-29P7 22 7 H-36P2 34 No Mating Hardware Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is .150" (3.8). 2 P Jackposts Connector is supplied with non-removable stainless steel jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. Stainless steel. H-54P2 52 2 H-5P5 H-66 66 G J-25P2 23 2 Guide Pins 33 J-7P7 Connector is supplied with stainless steel nonremovable guide pins. Mates with type "S" guide sockets on corresponding receptacle connector. 7 S Guide Sockets Connector is supplied with stainless steel nonremovable bushings. Mates with type "G" guide pins on corresponding receptacle connector. K-27P4 23 4 K-9P9 F 43 9 L-6P6 © 2009 Glenair, Inc. 6 Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G H INDEX K-35P2 33 2 K-43 E 5 J-17P4 13 4 J-33 C Table 2 Hardware Option F-15P2 13 2 F-23 B E-7 Rev. 04-July-2009 E-Mail: [email protected] Panel Mount Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination 790-027s shell size a,b,c,d,e,f,j,k Dimensions A A MAX B BASIC C BASIC D MAX B .233 (5.92) MAX blind mate .158 (4.01) C 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. SPRING, EMI .335 (8.51) .640 MAX (16.26) MAX .093 ± .005 (2.36 ± 0.13) D SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE E MAX C BASIC .215 (5.46) MAX .485 (12.32) MAX E 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES 790-027S Size A-F, J, K Dimensions F Shell Size A B C D E F J K G A Max. In. mm. 1.211 1.361 1.511 1.611 1.761 1.911 2.261 2.661 30.76 34.57 38.38 40.92 44.73 48.54 57.43 67.59 B Basic In . mm. .925 1.075 1.225 1.325 1.475 1.625 1.975 2.375 23.50 27.31 31.12 33.66 37.47 41.28 50.17 60.33 C Basic In. mm. .565 .715 .865 .965 1.115 1.265 1.615 2.015 14.35 18.16 21.97 24.51 28.32 32.13 41.02 51.18 D Max. In. mm. .335 .485 .635 .735 .885 1.035 1.390 1.795 8.51 12.32 16.13 18.67 22.48 26.29 35.31 45.59 E Max. In. mm. .760 .910 1.060 1.160 1.310 1.460 1.810 2.210 19.30 21.11 26.92 29.46 33.27 37.08 45.97 56.13 H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-8 Rev. 04-July-2009 E-Mail: [email protected] Panel Mount Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination 790-027s shell size g Dimensions A 1.861 (47.27) MAX 1.575 (40.01) BASIC 1.215 (30.86) BASIC .320 (8.13) MAX 1.010 (25.65) MAX .158 (4.01) 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES B JACKPOST SHOWN FOR REFERENCE. C .335 (8.51) MAX .640 (16.26) MAX .093 ± .005 (2.36 ± 0.13) D 1.410 (35.81) MAX 1.215 (30.86) BASIC .215 (5.46) MAX E .575 (14.61) MAX 2-56 UNC-2B X .150 (3.81) MIN 2 PLACES F G blind mate H INDEX SHELL SIZES A, B, C, D, E, F, G, J, K +/- .030 (0.76) ALLOWABLE MISALIGNMENT FROM CENTERLINE © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-9 Rev. 04-July-2009 E-Mail: [email protected] Panel Mount Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination 790-027s shell size H and l Dimensions A F MAX G BASIC H BASIC J MAX B C D blind mate .349 (8.86) MAX 4-40 UNC-2B X .150 (3.81) MIN 2 PLACES JACKPOST SHOWN FOR REFERENCE. SEE ORDERING INFORMATION FOR OTHER OPTIONS. .158 (4.01) SHELL SIZES H, L +/- .040 (1.02) ALLOWABLE MISALIGNMENT FROM CENTERLINE .385 (9.78) MAX .640 (16.26) MAX .093 ± .005 (2.36 ± 0.13) K MAX E H BASIC .265 (6.73) MAX .600 (15.24) MAX F 4-40 UNC-2B X .150 (3.81) MIN 2 PLACES 790-027S Size H & L Dimensions G Shell Size H L F Max. In. mm. G Basic In. mm. H Basic In. mm. J Max. In. mm. K Max. In. mm. 2.500 63.50 2.736 69.49 2.236 56.79 2.472 62.79 1.800 45.72 2.036 51.71 1.385 35.18 1.623 41.22 2.045 51.94 2.281 57.94 H INDEX © 2009 Glenair, Inc. Dimensions in inches (millimeters) and are subject to change without notice. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-10 Rev. 04-July-2009 E-Mail: [email protected]