Series 79 90° PCB Connectors 790-041P Right Angle PCB Terminated Free-Standing Receptacle, Pin Contacts How To Order 790-041P Right Angle Free-Standing Receptacles PIN CONTACTS WITH RIGHT ANGLE PCB TERMINATION Lightweight, rugged right angle headers feature gold-plated contacts for thruhole printed circuit board termination. 790-041P connectors are free-standing (not for panel mounting) and mate to 790-025S cable plugs. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes and integral standoffs simplify installation. EMI shroud improves EMI performance. Fluorosilicone face seal provides watertight interface. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. HOW TO ORDER Sample Part Number 790-041P J-25P2 M P A Part Number Shell Size Insert Arrangements Shell Finish Hardware Option PC Tail Length 790-041P Header Receptacle with 90° PC Tail Pin Contacts for Termination to Backplanes or Flexible Circuits See Table 1 for Available Insert Arrangements M A Electroless Nickel .125 Inch (3.2 mm.) general purpose applications B MT Nickel-PTFE N No Hardware 1000 Hour Grey™ maximum corrosion protection and durability (non-reflective grey) PC TAIL LENGTH ZNU Zinc-Nickel with Black Chromate P tactical applications (non-reflective black) G .250 inch (6.4 mm.) Female Jackpost Additional shell finishes are listed on page C-9. SPECIFICATIONS Current Rating Dielectric Withstanding Voltage Insulation Resistance Operating Temperature Shock Vibration MATERIALS AND FINISHES #23 5 AMPS, #16 13 A., #12 23 A. #23 500 VAC RMS, #12 and #16 1800 VAC RMS 5000 megohms minimum -65° C. to +150° C. 300 g. 37 g. Shell Contacts Insulator EMI Shroud Interfacial Seal Jackposts Tray Encapsulant Aluminum alloy Copper alloy, 50 microinches gold plated Liquid crystal polymer (LCP) Aluminum alloy Flourosilicone rubber 300 series stainless steel Thermoplastic Epoxy Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-6 Series 79 90° PCB Connectors 790-041P Right Angle PCB Terminated Free-Standing Receptacle, Pin Contacts How To Order Table I Contact Arrangements CROSS-SECTIONAL VIEW OF 790-041P Contact Quantity Layout A-5 #23 #16 #12 5 B-9 9 C-13 13 D-15 15 INTERFACIAL SEAL INSULATOR PIN CONTACT EPOXY EMI SHROUD 2 B-2P2 Face View SHELL 3 D-3P3 D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 TABLE 2 HARDWARE OPTION 3 F-15P2 13 2 F-23 23 5 F-5P5 G-33 33 H-10P4 6 4 H-29P7 22 7 H-36P2 34 2 H-54P2 52 2 P Jackposts Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is .150" (3.8). Connector is supplied with non-removable stainless steel jackposts. Shell sizes H and L have #4-40 UNC thread, other sizes have #2-56 thread. 5 H-5P5 H-66 N No Mating Hardware 66 J-17P4 13 4 J-25P2 23 2 J-33 33 G 7 J-7P7 K-27P4 23 4 K-35P2 33 2 K-43 43 9 K-9P9 6 L-6P6 L-78 78 M-102 102 Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-7 www.glenair.com Series 79 90° PCB Connectors 790-041P Right Angle PCB Terminated Free-Standing Receptacle, Pin Contacts Dimensions 790-041P Shell Sizes A-F, J and K Dimensions 790-041P SHELL SIZES A-F, J AND K A MAX .167 (4.95) .228 (5.79) MIN .308 (7.82) MAX B BASIC .078 (1.98) MIN C MAX .430 (12.70) (10.92) .500 MAX Shell Size A B C D E F J K A Max. In. mm. B Basic In. mm. C Max. In. mm. .805 20.45 .565 14.35 .401 10.19 .955 24.26 1.105 28.07 .715 18.16 .865 21.97 .551 14.00 .701 17.81 1.205 30.61 1.355 34.42 1.505 38.23 .965 24.51 1.115 28.32 1.265 32.13 .801 20.35 .951 24.16 1.101 27.96 1.855 47.12 2.255 57.28 1.615 41.02 2.015 51.18 1.460 37.08 1.860 47.24 JACKPOST, #2-56 PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .195 (4.95) 2-56 UNC-2B 2 PLACES CONTACT TAIL DIA #23 CONTACT .018/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) .540 (13.72) MAX .410 (10.41) B BASIC A MAX 790-041P Shell Size G Dimensions .228 (5.79) MIN 1.455 (36.96) MAX .209 (5.31) G BASICBASIC 1.215 B (30.86) 1.079 (27.41) MAX .387 (9.83) MAX .078 (1.98) MIN .530 (13.46) MAX .195 (4.95) JACKPOST, #2-56 .018/.022 (0.46/0.56) .615 (15.62) MAX .485 (12.62) 2-56 UNC-2B 2 PLACES PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) 1.215 (30.86) BASIC 1.455 (36.96) MAX Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-8 Series 79 90° PCB Connectors 790-041P Right Angle PCB Terminated Free-Standing Receptacle, Pin Contacts Dimensions 790-041P Shell Sizes H & L Dimensions #2-56 FLAT HEAD SCREW #2-56 FLATHEAD SCREW AA MAX MAX BASIC BB BASIC MAX CCMAX .222 (5.64) .222 (5.64) .415 (10.54) .415 (10.54) MAX MAX .288 (6.05) .288 (6.05) MIN MIN .088 .088 (2.24) (2.24) .550 (13.97) .550 (13.97) MAX MAX PCTAIL TAILLENGTH LENGTH PC ± .020 (0.51) ±.020 (0.51) CODE A: .125 (3.18) CODEB:A:.250 .125 (3.18) CODE (6.35 CODE B: .250 (6.35) JACKPOST, #4-40 #4-40 JACKPOST CONTACT TAIL CONTACT TAIL DIA DIA. #23 CONTACT .018/.022 (0.46/0.56) #23 CONTACT 0.18/.022 (0.46/0.56) #16 CONTACT .060/.064 (1.52/1.63) #16 CONTACT .060/.064 (1.52/1.63) #12 CONTACT .096/.092 (2.44/2.34) #12 CONTACT .096/.092 (2.44/2.34) .195 (4.95) .195 (4.95) .491 .491 (12.47) (12.47) .700 .700 (17.78) (17.78) MAX MAX Shell Size H L BASIC BB BASIC 4-40UNC-2B UNC-2B 4-40 PLCS 22PLCS 790-041P SHELL SIZES H AND L A MAX MAX A A Max. In. mm. B Basic In. mm. C Max. In. mm. 2.185 55.50 2.430 61.72 1.800 45.72 2.036 51.71 1.450 36.83 1.686 42.82 790-041P Shell Size M Dimensions 2X #2-56 FLAT 2X #2-56 HEAD SCREW FLATHEAD SCREW 2.575 (65.41) BASICBASIC 2.575 (65.41) 2.200 (55.88) BASICBASIC 2.200 (55.88) 1.745 (44.32) MAX 1.745 (44.32)MAX .470 .635 .470 .635 (16.13) (11.94) (11.94) (16.13) MAX. MAX MAX .350 (8.89) MAX MAX .566 .566 (14.38) (14.38) BASIC BASIC .765 .765 (19.43) MAX (19.43) BASIC 2X 6-32 UNC-2B 2X 6-32 UNC-2B .150 (3.81) MIN MIN XX .150 (3.81) JACKPOST SHOWNSHOWN FOR REFERENC E JACKPOST SEE TABLE I (DWG. SHEET #1 ) FOR REFERENCE .078 (1.98) .170 (4.32) .170 (4.32) .250 PC TAIL LENGTH .250) (6.35) (6.35) ±.020 (0.51) MIN MIN PC TAIL LENGTH ±.020 CODE A: .125 (3.18) CODE A: .125 (3.18) CODE B: .250 CODE B:(6.35) .250 (6.35) .018/.022 (0.46/0.56) .018/.022 (0.46/0.56) 2X 4-40 UNC-2B 2X 4-40 UNC-2B 2.200(55.88) (55.88) BASIC 2.200 BASIC 2.575 (65.41) (65.41) MAXMAX 2.575 Dimensions in Inches (millimeters) are subject to change without notice. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] G-9 www.glenair.com G