MOTOROLA BFR93ALT1

Order this document
by BFR93ALT1/D
SEMICONDUCTOR TECHNICAL DATA
The RF Line
Designed primarily for use in high–gain, low–noise, small–signal UHF and
microwave amplifiers constructed with thick and thin–film circuits using surface
mount components.
• T1 Suffix Indicates Tape and Reel Packaging of 3,000 Units per Reel.
RF TRANSISTORS
NPN SILICON
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector–Emitter Voltage
VCEO
12
Vdc
Collector–Base Voltage
VCBO
15
Vdc
Emitter–Base Voltage
VEBO
2.0
Vdc
Collector Current — Continuous
IC
35
mAdc
Maximum Junction Temperature
TJmax
150
°C
PD(max)
0.306
4.08
W
mW/°C
Symbol
Max
Unit
Tstg
– 55 to +150
°C
RθJC
245
°C/W
Power Dissipation, Tcase = 75°C (2)
Derate linearly above Tcase = 75°C @
THERMAL CHARACTERISTICS
Characteristic
Storage Temperature
Thermal Resistance Junction to Case
CASE 318–08, STYLE 6
SOT–23
LOW PROFILE
DEVICE MARKING
BFR93ALT1 = R2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Max
Unit
Collector–Emitter Breakdown Voltage (1)
(IC = 10 mA)
V(BR)CEO
12
—
Vdc
Collector–Base Breakdown Voltage
(IC = 10 µA)
V(BR)CBO
15
—
Vdc
Emitter–Base Breakdown Voltage
(IC = 100 µA)
V(BR)EBO
2.0
—
Vdc
Collector Cutoff Current (VCE = 10 V)
ICEO
—
50
nA
Collector Cutoff Current (VCB = 10 V)
ICBO
—
50
nA
hFE
40
—
—
Collector–Emitter Saturation Voltage (1)
(IC = 35 mA, IB = 7.0 mA)
VCE(sat)
—
0.5
Vdc
Base–Emitter Saturation Voltage (1)
(IC = 35 mA, IB = 7.0 mA)
VBE(sat)
—
1.2
Vdc
Characteristic
OFF CHARACTERISTICS
ON CHARACTERISTICS
DC Current Gain (1)
(IC = 30 mA, VCE = 5.0 V)
NOTES:
1. Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%.
2. Case temperature measured on collector lead immediately adjacent to body of package.
REV 7
RF DEVICE DATA
MOTOROLA
Motorola, Inc. 1995
BFR93ALT1
1
ELECTRICAL CHARACTERISTICS — continued (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
Current–Gain — Bandwidth Product
(IC = 30 mA, VCE = 5.0 V, f = 500 MHz)
fT
3.0
—
GHz
Noise Figure
(VCE = 5.0 V, IC = 2.0 mA, RS = 50 Ω, f = 30 MHz)
NF
—
3.0
dB
SMALL–SIGNAL CHARACTERISTICS
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD THICKNESS
IS THE MINIMUM THICKNESS OF BASE
MATERIAL.
A
L
3
B S
1
V
2
G
C
H
D
K
J
DIM
A
B
C
D
G
H
J
K
L
S
V
INCHES
MIN
MAX
0.1102 0.1197
0.0472 0.0551
0.0350 0.0440
0.0150 0.0200
0.0701 0.0807
0.0005 0.0040
0.0034 0.0070
0.0140 0.0285
0.0350 0.0401
0.0830 0.1039
0.0177 0.0236
MILLIMETERS
MIN
MAX
2.80
3.04
1.20
1.40
0.89
1.11
0.37
0.50
1.78
2.04
0.013
0.100
0.085
0.177
0.35
0.69
0.89
1.02
2.10
2.64
0.45
0.60
STYLE 6:
PIN 1. BASE
2. EMITTER
3. COLLECTOR
CASE 318–08
ISSUE AE
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
BFR93ALT1
2
◊
*BFR93ALT1/D*
BFR93ALT1/D
MOTOROLA RF DEVICE
DATA