OMRON XW2Z-300F

XW2Z
XW2Z
Dimensions
Unit: mm (inch)
3 XW2Z-PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE)
The G79-PC Cable with a connector for the G7TC cannot be
used for the XW2C due to a difference in wiring. The G79-PC
Cable can be used for some of the XW2B Screw Terminal
Blocks, refer to the XW2B data sheet.
Wiring Diagram
FCN-367J024-AU/F
(mated side)
XG4M-2030
(mated side)
Cable length L
Part number
Cable length L
XW2Z-050A
0.5 m (1.64 ft)
XW2Z-100A
1 m (3.28 ft)
XW2Z-150A
1.5 m (4.92 ft)
XW2Z-200A
2 m (6.56 ft)
XW2Z-300A
3 m (9.84 ft)
XW2Z-500A
5 m (16.40 ft)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points
Terminal block
C200H-ID215
C200H-OD215
C200H-MD215
C200H-MD115
C200H-MD501
C200H-ID501
C200H-OD501
C500-ID218CN
C500-ID501CN
C500-OD415CN
C500-MD211CN
C500-OD501CN
32 points input
32 points output
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
32 points input
32 points output
32 points input
32 points input
32 points output
16 points in/16 points out
32 points output
XW2B-20G5
XW2B-20G4
XW2B-40G5-T
XW2B-20G5-D
C200H-ID215
C200H-ID501
C500-ID218CN
C500-ID501CN
C200H-MD215
C200H-MD115
C200H-MD501
C500--MD211CN
32 points input
32 points input
32 points input
32 points input
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
16 points in/16 points out
XW2C-20G5-IN16
(See Note 3)
Dedicated cable
XW2Z-PPPA
Note: 1. The G79-P Cable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC
Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet.
2. The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated
cables.
3. The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output
signals (modules with “MD” in the part number), only the input portion of the PLC module can be used.
3
XW2Z
XW2Z
Unit: mm (inch)
3 XW2Z-PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Wiring Diagram
FCN-367J040-AU/F
(mated side)
Cable length L
XG4M-4030
(mated side)
Part number
Cable length L
XW2Z-050B
0.5 m (1.64 ft)
XW2Z-100B
1 m (3.28 ft)
XW2Z-150B
1.5 m (4.92 ft)
XW2Z-200B
2 m (6.56 ft)
XW2Z-300B
3 m (9.84 ft)
XW2Z-500B
5 m (16.40 ft)
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points
CQM1-ID213
CQM1-OD213
C200H-ID216
C200H-OD218
C200H-OD21B
32 points
C200H-ID111
C200H-ID217
C200H-OD219
C500-ID114
3G2A5-ID219
3G2A5-OD213
64 points
Terminal block
XW2B-40G5
XW2B-40G4
Note: 32-point I/O modules use one Terminal Block and one dedicated cable.
64-point I/O modules use two Terminal Blocks and two dedicated cables.
4
Dedicated cable
XW2Z-PPPB
XW2Z
XW2Z
3 XW2Z-PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)
Part number
XW2Z-P00D
Cable length A
Cable length B
XW2Z-100D
1 m (3.28 ft)
0.75 m (2.46 ft)
XW2Z-150D
1.5 m (4.92 ft)
1.25 m (4.10 ft)
XW2Z-200D
2 m (6.56 ft)
1.75 m (5.74 ft)
XW2Z-300D
3 m (9.84 ft)
2.75 m (9.02 ft)
XW2Z-500D
5 m (16.40 ft)
4.75 m (15.58 ft)
Note: 1. CN2 (black cable side) is wired to line A of CN1 and
CN3 (yellow cable side) is wired to line B of CN1.
2. The G79-PC Cable for the G7TC Terminal Block cannot be used for the XW2C due to a difference in wiring.
Cable length for A and B
B
250 (9.84)
Yellow
Black
Line Line
A
B
500 (19.68)
A
Wiring Diagram
FCN-367J024-AU/F
CN1 (mated side)
XG4M-2030
CN3 (mated side)
XG4M-2030
CN2 (mated side)
Triangle mark
Triangle mark
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points
Terminal block
Dedicated cable
CQM1-ID213
C200H-ID216
32 points
Two XW2C-20GS-IN16 input blocks
One XW2Z-PPPD cable
C200H-ID217
C500-ID114
3G2A5-ID219
64 points
Four XW2C-20GS-IN16 input blocks
Two XW2Z-PPPD cables
5
XW2Z
XW2Z
Unit: mm (inch)
3 XW2Z-PPPH-P FOR 96-POINT CS1 PLC I/O MODULES (CONNECTOR TYPE)
XW2Z-P00H-1
XW2Z-P00H-2
A
XW2Z-P00H-3
A
A
B
B
C
Part number
XW2Z-100H-1
Cable length
Part number
Cable length A
A
1 m (3.28 ft)
B
C
XW2Z-200H-1
2 m (6.56 ft)
XW2Z-100H-3
XW2Z-300H-1
3 m (9.84 ft)
XW2Z-200H-3
2 m (6.56 ft)
1.75 ft (5.74 ft) 2 m (6.56 ft)
XW2Z-500H-1
5 m (16.40 ft)
XW2Z-300H-3
3 m (9.84 ft)
2.75 ft (9.02 ft) 3 m (9.84 ft)
XW2Z-500H-3
5m
(16.40 ft)
4.75 ft
(15.58 ft)
Part number
Cable length A
Cable length B
XW2Z-100H-2
1 m (3.28 ft)
1 m (3.28 ft)
XW2Z-200H-2
2 m (6.56 ft)
2 m (6.56 ft)
XW2Z-300H-2
3 m (9.84 ft)
3 m (9.84 ft)
XW2Z-500H-2
5 m (16.40 ft)
5 m (16.40 ft)
1 m (3.28 ft)
0.75 ft (2.45 ft) 1 m (3.28 ft)
5m
(16.40 ft)
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
I/O points
Terminal blocks
Dedicated cable
CS1W-ID291,
CS1W-OD291, CS1W-OD292
CS1W-MD291, CS1W-MD292
96 points
Two XW2B-60GP terminal blocks
Two XW2Z-PPPH-1 cables
CS1W-ID291,
CS1W-OD291, CS1W-OD292
CS1W-MD291, CS1W-MD292
96 points
Two XW2B-40G4 + XW2B-20G4 or
two XW2B-40G5 + XW2B-20G5
terminal blocks
Two XW2Z-PPPH-2 cables
CS1W-ID291,
CS1W-OD291, CS1W-OD292
CS1W-MD291, CS1W-MD292
96 points
Six XW2B-20G4 or six XW2B-20G5
terminal blocks
Two XW2Z-PPPH-3 cables
Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.
6
XW2Z
XW2Z
3 XW2Z-PPPF CABLE WITH CRIMP TERMINALS (20 POLES)
Wiring Diagram
XG4M-2030
(mated side)
Cable length L
XG4M-2030
Terminal Y
(M3.5)
To
devices
Terminal Y
(M3.5)
300
(11.81)
Triangle mark
Part number
Cable length L
XW2Z-100F
1 m (3.28 ft)
XW2Z-150F
1.5 m (4.92 ft)
XW2Z-200F
2 m (6.56 ft)
XW2Z-300F
3 m (9.84 ft)
XW2Z-500F
5 m (16.40 ft)
Combinations of Omron PLC I/O Modules and Screw Terminal Blocks
PLC I/O module
Use any I/O module with a terminal block
from Omron or another manufacturer, or an
I/O board for a computer.
Terminal block
XW2B-20G5
XW2B-20G4
Dedicated cable
XW2Z-PPPF
7
XW2Z
XW2Z
Installation
3 CONNECTIONS BETWEEN OMRON’S I/O MODULES AND SCREW TERMINAL BLOCKS
Item
Input (ID)
Output (OD)
PLC I/O modules
C200H-OD215
C200H-OD501
C500-OD501CN
C200H-ID215
C200H-ID501
C500-ID501CN
C500-ID218CN
32-point input modules use two
blocks and two cables.
32-point output modules use two
blocks and two cables.
Terminal blocks
XW2B-20G5
XW2B-20G4
XW2B-20G5
XW2B-20G4
XW2Z-PPPA
XW2Z-PPPA
Cable
Connection
diagram
XW2B--20G5
XW2B--20G5
Cable
G79-PC
G79-PC
Connection
diagram
XW2B-20G5
8
XW2B-20G5
XW2Z
XW2Z
Item
Output (OD)
PLC I/O module
C500-OD415CN
32-point output module uses
two blocks and two cables.
Terminal block
XW2B-20G5
XW2B-20G4
Cable
G79-PC
XW2Z-PPPA
Connection
diagram
XW2B-20G5
XW2B-20G5
XW2B-20G5
XW2B-20G5
9
XW2Z
XW2Z
Item
Mixed I/O (MD)
PLC I/O modules
C200H-MD115
C200H-MD215
C200H-MD501
C500-MD211CN
16-point input/16-point output mixed I/O
modules use two blocks and two cables.
Terminal blocks
XW2B-20G5
XW2B-20G4
Cable
G79-PC
XW2Z-PPPA
Connection
diagram
XW2B-20G5
XW2B-20G5
10
XW2B-20G5
XW2B-20G5
XW2Z
XW2Z
Item
Group 2 High--density Input/Output
PLC I/O module
CQM1-ID213
C200H-ID216
C200H-ID111
C200H-ID217
C500-ID114
3G2A5-ID219
32-point
32-point
64-point
64-point
64-point
64-point
Use one terminal block and one cable.
Use one terminal block and one cable.
Use two terminal blocks and two cables.
Use two terminal blocks and two cables.
Use two terminal blocks and two cables.
Use two terminal blocks and two cables.
CQM1-OD213
C200H-OD218
C200H-OD219
32-point Use one terminal block and one cable.
32-point Use one terminal block and one cable.
64-point Use two terminal blocks and two cables.
Terminal block
XW2B-40G5
XW2B-40G4
Cable
Connection
diagram
XW2Z-PPPB
(
( )
XW2B-40G5
)
( )
11
XW2Z
XW2Z
Item
High-density I/O
1:1 Connection
PLC I/O module
CS1W-ID29P
CS1W-OD29P
CS1W-MD29P
Use two terminal blocks and two cables.
Terminal block
One XW2B-60G5 or
one XW2B-60G4 per cable
Cable
XW2Z-PPPH-1
Connection
XW2B-60GP
Item
High-density I/O
1:2 Connection
PLC I/O module
CS1W-ID29P
CS1W-OD29P
CS1W-MD29P
Use two 40-point and two 20-point
terminal blocks and two cables.
Terminal block
XW2B-40G5 + XW2B-20G5 blocks or
XW2B-40G4 + XW2B-20G4 blocks
per cable
Cable
XW2Z-PPPH-2
Connection
XW2B-40GP
XW2B-20GP
Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.
12
XW2Z
XW2Z
Item
High-density I/O
1:3 Connection
PLC I/O module
CS1W-ID29P
CS1W-OD29P
CS1W-MD29P
Use six 20-point terminal blocks of
the same kind and two cables.
Terminal block
Three XW2B-20G5 blocks or
three XW2B-20G4 blocks
per cable
Cable
XW2Z-PPPH-3
Connection
XW2B-20GP
XW2B-20GP
XW2B-20GP
Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
9
OMRON ELECTRONICS, INC.
OMRON CANADA, INC.
One East Commerce Drive
Schaumburg, IL 60173
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. GC RIO-1
04/00
Specifications subject to change without notice.
Printed in U.S.A.