Ordering number : ENN7380 2SB1700 / 2SD2663 PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB1700 / 2SD2663 Driver Applications Applications Package Dimensions unit : mm 2042B • • 4.0 1.0 1.0 High DC current gain. Large current capacity and wide ASO. Micaless package facilitating mounting. 3.3 3.0 1.5 7.5 • [2SB1700 / 2SD2663] 8.0 Features 11.0 Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. 1.4 • 15.5 3.0 1.6 0.8 0.8 0.7 0.75 1 2 1 : Emitter 2 : Collector 3 : Base 3 ( ) : 2SB1700 1.7 2.4 Specifications 4.8 SANYO : TO-126ML Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--)110 V Collector-to-Emitter Voltage VCEO (--)100 V Emitter-to-Base Voltage VEBO (--)6 V IC (--)3 A ICP (--)5 A 1.5 W Collector Current Collector Current (Pulse) Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C 10 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO Conditions Ratings min typ max VCB=(--)80V, IE=0 VEB=(--)5V, IC=0 Unit (--)0.1 mA (--)3.0 mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1003 TS IM TA-100279, 100280 No.7380-1/4 2SB1700 / 2SD2663 Continued from preceding page. Parameter Symbol DC Current Gain Ratings Conditions min typ hFE fT VCE=(--)3V, IC=(--)1.5A VCE=(--)5V, IC=(--)1.5A 20 Collector-to-Emitter Saturation Voltage VCE(sat) (--1.0)0.9 Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)1.5A, IB=(--)3mA IC=(--)1.5A, IB=(--)3mA Gain-Bandwidth Product Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Turn-ON Time Storage Time Fall Time 1500 IC=(--)5mA, IE=0 IC=(--)50mA, RBE=∞ Unit max 4000 MHz (--)1.5 V (--)2.0 V (--)110 V (--)100 V ton tstg See specified Test Circuit. (0.8)0.7 µs See specified Test Circuit. (2.4)5.0 µs tf See specified Test Circuit. 1.2 µs Specified Test Circuit (For PNP, the polarity is reversed.) Electrical Connection C OUTPUT PW=50µs, Duty Cycle≤1% 500IB1= --500IB2=IC=1A TUT B RB INPUT RL 50Ω 50Ω 6kΩ 200Ω E 2SB1700 VR C + 100µF + 470µF VBE= --5V B VCC=50V 6kΩ 200Ω E 2SD2663 IC -- VCE 2SB1700 --500µA --2.0 2SD2663 500µA 450µA 400µA --450µA --1.5 --400µA --350µA --300µA --250µA --1.0 --200µA --150µA --0.5 2.0 350µA 300µA 1.5 250µA 1.0 200µA 0.5 IB=0 0 0 --1 --2 --3 --4 --5 --6 --7 --8 From top --5.0mA --4.5mA --4.0mA --3.5mA --3.0mA --2.5mA --2.0mA --4 --1.0mA --2 3 4 5 6 7 8 9 10 IT04730 IC -- VCE 6 From top 5.0mA 4.5mA 4.0mA 3.5mA 3.0mA 2.5mA 2.0mA 5 --1.5mA 2 Collector-to-Emitter Voltage, VCE -- V 2SB1700 --3 1 IT04729 Collecotr Current, IC -- A --5 IB=0 0 --10 IC -- VCE --6 150µA 0 --9 Collector-to-Emitter Voltage, VCE -- V Collecotr Current, IC -- A IC -- VCE 2.5 Collecotr Current, IC -- A Collecotr Current, IC -- A --2.5 4 2SD2663 1.5mA 1.0mA 3 2 1 --1 IB=0 0 0 --1 --2 --3 --4 --5 --6 IB=0 0 --7 --8 Collector-to-Emitter Voltage, VCE -- V --9 --10 IT04731 0 1 2 3 4 5 6 7 8 9 Collector-to-Emitter Voltage, VCE -- V 10 IT04732 No.7380-2/4 2SB1700 / 2SD2663 IC -- VBE Collector Current, IC -- A 2.0 1.0 0.5 --0.5 0 --0.4 --0.8 --1.2 --1.6 --2.0 10000 DC Current Gain, hFE 3 2 ° --40 C 1000 7 --1000 2 3 Collector Current, IC -- mA Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 Ta= --40°C 25°C 120°C 5 3 --100 2 3 5 7 --1000 2 3 Collector Current, IC -- mA 2 Ta= --40°C 25°C --1.0 120°C 7 5 --100 2 3 5 7 --1000 Collector Current, IC -- mA 2 3 5 IT04739 1000 2 3 5 IT04736 3 2 Ta= --40°C 1.0 25°C 7 120°C 5 2 3 5 7 1000 2 3 Collector Current, IC -- mA 5 IT04738 VBE(sat) -- IC 5 3 7 VCE(sat) -- IC IT04737 2SB1700 IC / IB=500 5 2SD2663 IC / IB=500 3 100 5 VBE(sat) -- IC 5 3 Collector Current, IC -- mA 5 2SB1700 IC / IB=500 --1.0 2 IT04735 3 7 2 100 5 VCE(sat) -- IC 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 3 7 °C --40 1000 3 5 C 2 5 3 2SD2663 VCE=3V C 25° 3 5 2 2.4 IT04734 5 Base-to-Emitter Saturation Voltage, VBE(sat) -- V DC Current Gain, hFE C 25° 2.0 20° 1 Ta= 7 5 1.6 hFE -- IC 10000 2 Ta=1 7 1.2 Base-to-Emitter Voltage, VBE -- V 2 2SB1700 VCE= --3V 0°C 0.8 IT04733 hFE -- IC 2 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 0 0.4 --2.4 Base-to-Emitter Voltage, VBE -- V 2 --100 --40°C 1.5 25°C --40°C 25°C 20°C --1.0 2.5 0°C --2.0 --1.5 2SD2663 VCE=3V 3.0 --2.5 Ta= 1 Collector Current, IC -- A --3.0 IC -- VBE 3.5 2SB1700 VCE= --3V Ta=1 2 --3.5 2SD2663 IC / IB=500 3 2 Ta= --40°C 25°C 1.0 120°C 7 5 100 2 3 5 7 1000 Collector Current, IC -- mA 3 5 IT04740 No.7380-3/4 2SB1700 / 2SD2663 ASO ICP=5A 0µ s s 1m ms 1.0 7 5 0.1 7 5 3 2 s 0m 10 DC operation Ta=25°C 3 2 DC operation Tc=25°C 100µs to 100ms : Single pulse For PNP, minus sign is omitted 0.01 0.1 2 3 5 7 1.0 2 3 2SB1700 / 2SD2663 Collector Dissipation, PC -- W 10 IC=3A 3 2 PC -- Ta 2.0 2SB1700 / 2SD2663 10 Collector Current, IC -- A 10 7 5 1.5 1.0 0.5 0 5 7 10 2 3 Collector-to-Emitter Voltage, VCE -- 5 7 100 2 V IT04741 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- °C 160 IT04742 PC -- Tc 12 Collector Dissipation, PC -- W 2SB1700 / 2SD2663 10 8 6 4 2 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT05888 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7380-4/4