STN2NF10 N-CHANNEL 100V - 0.23Ω - 2A SOT-223 STripFET™ II POWER MOSFET TYPE STN2NF10 ■ VDSS RDS(on) ID 100 V < 0.26 Ω 2A TYPICAL RDS(on) = 0.23 Ω 2 DESCRIPTION This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. APPLICATIONS DC-DC & DC-AC COVERTERS ■ DC MOTOR CONTROL (DISK DRIVERS, etc.) ■ SYNCHRONOUS RECTIFICATION ■ 1 2 3 SOT-223 INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol VDS Value Unit Drain-source Voltage (VGS = 0) 100 V Drain-gate Voltage (RGS = 20 kΩ) 100 V VGS Gate- source Voltage ± 20 V ID(•) Drain Current (continuos) at TC = 25°C 2 A ID Drain Current (continuos) at TC = 100°C 1.26 A VDGR IDM(••) Ptot EAS(1) Tstg Tj Parameter 8 A Total Dissipation at TC = 25°C Drain Current (pulsed) 2.5 W Derating Factor 0.02 W/°C Single Pulse Avalanche Energy 300 mJ Storage Temperature Max. Operating Junction Temperature (••) Pulse width limited by safe operating area. (•) Current limited by the package December 2001 . -65 to 150 °C 150 °C (1) ISD ≤1A, di/dt ≤300A/µs, VDD ≤ V (BR)DSS, Tj ≤ T JMAX 1/8 STN2NF10 THERMAL DATA Rthj-pcb Rthj-pcb Tl Thermal Resistance Junction-PCB (1 inch2 copper board) Thermal Resistance Junction-PCB (min. footprint) Maximum Lead Temperature For Soldering Purpose Typ 50 °C/W 90 260 °C/W °C ELECTRICAL CHARACTERISTICS (Tcase = 25 °C unless otherwise specified) OFF Symbol Parameter Test Conditions Drain-source Breakdown Voltage ID = 250 µA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating TC = 125°C IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 20V V(BR)DSS Min. Typ. Max. 100 Unit V 1 10 µA µA ±100 nA Max. Unit 4 V 0.23 0.26 Ω Typ. Max. Unit ON (1) Symbol Parameter Test Conditions VGS(th) Gate Threshold Voltage VDS = VGS ID = 250 µA RDS(on) Static Drain-source On Resistance VGS = 10 V ID = 1 A Min. Typ. 2 DYNAMIC Symbol 2/8 Parameter Test Conditions Min. gfs (*) Forward Transconductance VDS>ID(on)xRDS(on)max ID=1A 2.5 S Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 280 45 20 pF pF pF STN2NF10 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol Parameter Test Conditions Min. Typ. Max. Unit td(on) tr Turn-on Delay Time Rise Time ID = 1 A VDD = 50 V RG = 4.7 Ω VGS = 10 V (Resistive Load, Figure 3) 6 10 ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD= 80V ID= 2A VGS=10V 10 2.5 4 nC nC nC SWITCHING OFF Symbol td(Voff) tf tc Parameter Turn-off Delay Time Fall Time Cross-over Time Test Conditions Min. ID = 2 A Vclamp = 80 V RG = 4.7Ω, VGS = 10 V (Inductive Load, Figure 5) Typ. Max. 19 4 15 Unit ns ns ns SOURCE DRAIN DIODE Symbol Parameter ISD ISDM (•) Source-drain Current Source-drain Current (pulsed) VSD (*) Forward On Voltage ISD = 2 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current di/dt = 100A/µs ISD = 2 A VDD = 10 V Tj = 150°C (see test circuit, Figure 5) trr Qrr IRRM Test Conditions Min. Typ. VGS = 0 70 175 5 Max. Unit 2 8 A A 1.2 V ns nC A (*)Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (•)Pulse width limited by safe operating area. Safe Operating Area Thermal Impedance 3/8 STN2NF10 Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 4/8 STN2NF10 Normalized Gate Threshold Voltage vs Temperature Normalized on Resistance vs Temperature Source-drain Diode Forward Characteristics . . . 5/8 STN2NF10 Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/8 STN2NF10 SOT-223 MECHANICAL DATA mm DIM. mils MIN. TYP. MAX. MIN. TYP. MAX. a 2.27 2.3 2.33 89.4 90.6 91.7 b 4.57 4.6 4.63 179.9 181.1 182.3 c 0.2 0.4 0.6 7.9 15.7 23.6 d 0.63 0.65 0.67 24.8 25.6 26.4 e1 1.5 1.6 1.7 59.1 63 66.9 e4 0.32 12.6 f 2.9 3 3.1 114.2 118.1 122.1 g 0.67 0.7 0.73 26.4 27.6 28.7 l1 6.7 7 7.3 263.8 275.6 287.4 l2 3.5 3.5 3.7 137.8 137.8 145.7 L 6.3 6.5 6.7 248 255.9 263.8 L e1 l2 d a c b e4 f l1 C B C E g P008B 7/8 STN2NF10 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics 2001 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 8/8