STPSA42 ® SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Ordering Code Marking Package / Shipment STPSA42 PSA42 TO-92 / Bulk STPSA42-AP PSA42 TO-92 ■ ■ ■ / Ammopack SILICON EPITAXIAL PLANAR NPN HIGH VOLTAGE TRANSISTOR TO-92 PACKAGE SUITABLE FOR THROUGH-HOLE PCB ASSEMBLY THE PNP COMPLEMENTARY TYPE IS STPSA92 APPLICATIONS ■ VIDEO AMPLIFIER CIRCUITS (RGB CATHODE CURRENT CONTROL) ■ TELEPHONE WIRELINE INTERFACE (HOOK SWITCHES, DIALER CIRCUITS) TO-92 Bulk TO-92 Ammopack INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V CBO Collector-Base Voltage (I E = 0) 300 V V CEO Collector-Emitter Voltage (I B = 0) 300 V V EBO Emitter-Base Voltage (I C = 0) IC I CM Collector Current Collector Peak Current (t p < 5 ms) o P tot Total Dissipation at T C = 25 C T stg Storage Temperature Tj Max. Operating Junction Temperature February 2003 5 V 0.5 A 0.6 A 625 mW -65 to 150 o C 150 o C 1/5 STPSA42 THERMAL DATA R t hj-amb • Thermal Resistance Junction-Ambient R thj-case • Thermal Resistance Junction-Case Max Max o 200 83.3 o C/W C/W ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) Symbol I CBO V (BR)CBO Parameter Test Conditions Min. Typ. Max. Unit 100 nA Collector Cut-off Current (I E = 0) V CB = 200 V Collector-Base Breakdown Voltage (I E = 0) I C = 100 µA 300 V I C = 1 mA 300 V 5 V V (BR)CEO ∗ Collector-Emitter Breakdown Voltage (I B = 0) V (BR)EBO Emitter-Base Breakdown Voltage (I C = 0) I E = 100 µA V CE(sat) ∗ Collector-Emitter Saturation Voltage I C = 20 mA I B = 2 mA 0.5 V V BE(sat) ∗ Base-Emitter Saturation Voltage I C = 20 mA I B = 2 mA 0.9 V DC Current Gain I C = 1 mA I C = 10 mA I C = 30 mA V CE = 10 V V CE = 10 V V CE = 10 V Transition Frequency I C = 10 mA V CE = 20 V f = 20 MHz C CBO Collector-Base Capacitance IE = 0 V CB = 10 V f = 1 MHz 6 pF C EBO Emitter-Base Capacitance IC = 0 V EB = 2 V f = 1 MHz 22 pF h FE ∗ fT ∗ Pulsed: Pulse duration = 300 µs, duty cycle ≤ 1.5 % 2/5 25 40 40 50 MHz STPSA42 TO-92 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.32 4.95 0.170 0.195 b 0.36 0.51 0.014 0.020 D 4.45 4.95 0.175 0.194 E 3.30 3.94 0.130 0.155 e 2.41 2.67 0.095 0.105 e1 1.14 1.40 0.045 0.055 L 12.70 15.49 0.500 0.609 R 2.16 2.41 0.085 0.094 S1 1.14 1.52 0.045 0.059 W 0.41 0.56 0.016 0.022 V 4 degree 6 degree 4 degree 6 degree 3/5 STPSA42 TO-92 AMMOPACK SHIPMENT (Suffix"-AP") MECHANICAL DATA DIM. A1 T T1 T2 d P0 P2 F1,F2 delta H W W0 W1 W2 H H0 H1 D0 t L I1 delta P 4/5 MIN. mm TYP. 12.50 5.65 2.44 -2.00 17.50 5.70 8.50 18.00 6.00 9.00 18.50 15.50 16.00 3.80 4.00 3.00 -1.00 12.70 6.35 2.54 MAX. 4.80 3.80 1.60 2.30 0.48 12.90 7.05 2.94 2.00 19.00 6.30 9.25 0.50 20.50 16.50 25.00 4.20 0.90 11.00 1.00 MIN. inch TYP. 0.492 0.222 0.096 -0.079 0.689 0.224 0.335 0.709 0.236 0.354 0.728 0.610 0.630 0.150 0.157 0.118 -0.039 0.500 0.250 0.100 MAX. 0.189 0.150 0.063 0.091 0.019 0.508 0.278 0.116 0.079 0.748 0.248 0.364 0.020 0.807 0.650 0.984 0.165 0.035 0.433 0.039 STPSA42 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics © 2003 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 5/5