STMICROELECTRONICS W120NF10

STP120NF10 - STB120NF10
STW120NF10
N-channel 100V - 0.009Ω - 110A - TO-247 - TO-220 - D²PAK
STripFET™ II Power MOSFET
General features
Type
VDSS
RDS(on)
ID
STW120NF10
STP120NF10
STB120NF10
100V
100V
100V
<0.0105Ω
<0.0105Ω
<0.0105Ω
110A
110A
110A
■
Exceptional dv/dt capability
■
100% avalanche tested
■
Application oriented characterization
3
1
TO-247
D²PAK
3
1
2
TO-220
Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process
has specifically been designed to minimize the
on-resistance. It is therefore suitable as primary
switch in advanced high-efficiency,high-frequency
isolated DC-DC converters for Telecom and
Computer application. It is also intended for any
applications with low gate drive requirements.
Internal schematic diagram
Applications
■
Switching application
Order codes
Part number
Marking
Package
Packaging
STW120NF10
W120NF10
TO-247
Tube
STP120NF10
P120NF10
TO-220
Tube
STB120NF10
B120NF10
D²PAK
Tape & reel
October 2006
Rev 6
1/15
www.st.com
15
Contents
STW120NF10 - STP120NF10 - STB120NF10
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................ 6
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
................................................ 8
STW120NF10 - STP120NF10 - STB120NF10
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDS
Drain-source voltage (VGS = 0)
100
V
VGS
Gate-source voltage
± 20
V
ID
Drain current (continuous) at TC = 25°C
110
A
ID
Drain current (continuous) at TC=100°C
77
A
Drain current (pulsed)
440
A
Total dissipation at TC = 25°C
312
W
Derating factor
2.08
W/°C
IDM
(1)
PTOT
dv/dt (2)
Peak diode recovery voltage slope
10
V/ns
EAS(3)
Single pulse avalanche energy
550
mJ
TJ
Operating junction temperature
Storage temperature
-55 to 175
°C
300
°C
Value
Unit
Tstg
TL
Maximum lead temperature for soldering purpose
1. Pulse width limited by safe operating area.
2. ISD < 120A, di/dt < 300A/µs, VDD = 80%V(BR)DSS
3. Starting Tj = 25°C, ID = 60A, VDD = 50V
Table 2.
Symbol
Thermal resistance
Parameter
Rthj-case
Thermal resistance junction-case max
0.48
°C/W
Rthj-amb
Thermal resistance junction-ambient max
62.5
°C/W
3/15
Electrical characteristics
2
STW120NF10 - STP120NF10 - STB120NF10
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3.
Symbol
V(BR)DSS
On/off states
Parameter
Drain-source breakdown
voltage
Test conditions
ID = 250µA, VGS= 0
Zero gate voltage drain
current (VGS = 0)
IGSS
Gate body leakage current
(VDS = 0)
VGS = ±20V
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250µA
RDS(on)
Static drain-source on
resistance
VGS= 10V, ID= 60A
Max.
100
Unit
V
1
10
µA
µA
±100
nA
4
V
0.009
0.0105
Ω
Typ.
Max.
Unit
VDS = Max rating@125°C
2
Dynamic
Symbol
Parameter
gfs (1)
Forward transconductance
VDS =25V, ID = 60A
90
S
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS =25V, f=1 MHz,
VGS=0
5200
785
325
pF
pF
pF
Total gate charge
Gate-source charge
Gate-drain charge
VGS =10V
Ciss
Coss
Crss
Qg
Qgs
Qgd
Test conditions
VDD=80V, ID = 120A
(see Figure 13)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
4/15
Typ.
VDS = Max rating,
IDSS
Table 4.
Min.
Min.
172
32
64
233
nC
nC
nC
STW120NF10 - STP120NF10 - STB120NF10
Table 5.
Symbol
td(on)
tr
td(off)
tf
Table 6.
Symbol
Electrical characteristics
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
Min.
Typ.
Max.
25
90
132
68
VDD=50V, ID= 60A,
RG=4.7Ω, VGS=10V
(see Figure 12)
Unit
ns
ns
ns
ns
Source drain diode
Max
Unit
Source-drain current
110
A
ISDM(1)
Source-drain current (pulsed)
440
A
VSD(2)
Forward on voltage
1.3
V
ISD
trr
Qrr
IRRM
Parameter
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Test conditions
Min
Typ.
ISD=120A, VGS=0
ISD=120A,
di/dt = 100A/µs,
VDD=40V, Tj=150°C
(see Figure 17)
152
760
10
ns
nC
A
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
5/15
Electrical characteristics
STW120NF10 - STP120NF10 - STB120NF10
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area
Figure 2.
Thermal impedance
Figure 3.
Output characterisics
Figure 4.
Transfer characteristics
Figure 5.
Normalized BVDSS vs temperature
Figure 6.
Static drain-source on resistance
6/15
STW120NF10 - STP120NF10 - STB120NF10
Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Figure 9.
Normalized gate threshold voltage
vs temperature
Capacitance variations
Figure 10. Normalized on resistance vs
temperature
Figure 11. Source-drain diode forward
characteristics
7/15
Test circuit
3
STW120NF10 - STP120NF10 - STB120NF10
Test circuit
Figure 12. Switching times test circuit for
resistive load
Figure 13. Gate charge test circuit
Figure 14. Test circuit for inductive load
Figure 15. Unclamped inductive load test
switching and diode recovery times
circuit
Figure 16. Unclamped inductive waveform
8/15
Figure 17. Switching time waveform
STW120NF10 - STP120NF10 - STB120NF10
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/15
Package mechanical data
STW120NF10 - STP120NF10 - STB120NF10
TO-247 MECHANICAL DATA
DIM.
mm.
MIN.
inch
MAX.
MIN.
TYP.
MAX.
A
4.85
5.15
0.19
0.20
A1
2.20
2.60
0.086
0.102
b
1.0
1.40
0.039
0.055
b1
2.0
2.40
0.079
0.094
0.134
b2
3.0
3.40
0.118
c
0.40
0.80
0.015
0.03
D
19.85
20.15
0.781
0.793
E
15.45
15.75
0.608
e
5.45
0.620
0.214
L
14.20
14.80
0.560
L1
3.70
4.30
0.14
L2
18.50
0.582
0.17
0.728
øP
3.55
3.65
0.140
0.143
øR
4.50
5.50
0.177
0.216
S
10/15
TYP
5.50
0.216
STW120NF10 - STP120NF10 - STB120NF10
Package mechanical data
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
11/15
Package mechanical data
STW120NF10 - STP120NF10 - STB120NF10
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
D1
E
8
10
E1
0.315
8.5
0.334
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
0º
0.126
0.015
4º
3
V2
0.4
1
12/15
STW120NF10 - STP120NF10 - STB120NF10
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
13/15
Revision history
6
STW120NF10 - STP120NF10 - STB120NF10
Revision history
Table 7.
14/15
Revision history
Date
Revision
Changes
20-Mar-2006
2
Preliminary datasheet
31-Mar-2006
3
Typing error
19-Jun-2006
4
New template, no content change
28-Jun-2006
5
New ID value on Table 1
05-Oct-2006
6
New value on Table 6
STW120NF10 - STP120NF10 - STB120NF10
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
15/15